Site-to-Site VPN Connection Status Changes to Unknown
Hello, I set up a Site-to-Site VPN connection from an Azure VNET to an on-premise network to access a private SMS gateway, following this tutorial: Site-to-Site VPN Gateway Setup. Here’s the setup: The on-premise VPN device is supported. The local…
Azure VPN Site to Site
Hello, I have topology like below picture, where i have 2 onprem location. Onprem-1 subnet is 10.7.0.0/16, Onprem-2 subnet is 10.38.0.0/16 and Azure subnet is 10.200.0.0/16 Each Onprem have 2 internet connection to connecting to Azure, with 2 internet…
Does Azure S2S VPN automatically create an Access Control List in Gateway Subnet?
When configuring a S2S VPN.. we would normally create an ACL to bring up the vpn.. such as the following on our on prem router/firewall.... access-list 101 permit esp host X.X.X.X host X.X.X.X access-list 101 permit udp host X.X.X.X eq isakmp host…
How to create a VPN Gateway with AZ SKU in CanadaEast
We received an email named VPN Gateway non-AZ SKUs (VpnGw 1–5) will be retired and automatically migrated on 16 September 2026. While we understand that VPN Gateway non-AZ SKUs will be retired and automatically migrated to AZ SKUs in 2026, it states that…
Exploring Cost-Effective Solutions for Routing Traffic from an Azure Private Endpoint to a VPN Gateway
Greetings, I would appreciate assistance with a design to a solution I would like to implement on Azure. Below I summarized all the information and approaches I tried. Customer has a private endpoint on a "consumer" VNet, from which I…
How to connect Private-Link resource to a VPN gateway?
Greetings, I would appreciate assistance with a design to a solution I would like to implement on Azure. Below I summarized all the information and approaches I tried. Customer has a private endpoint on a "consumer" VNet, from which I…
ACL's blocking traffic to A VPN Gateway
Hi, I've been working around a problem with a VPN Gateway i built a few days ago. It appears the traffic is blocked inbound to this gateway by an ACL that i cant edit, control or even see. The former architecture is a hub/spoke design connected with an…
Point to site
Currently now i have VPN gateway to connecting my onprem to azure via site to site VPN. If i enabled the Point To Site to connecting home user to azure resources and to connecting to internal onprem resources, will consume extra costs or not?
Routing decision on azure virtual network gateway
Hi, We have two tunnels on azure vpn gateway. Client DC1 vpn peer1: 1.1.1.1 (LNG1 - static routing) Address space: 10.98.1.0/24 Client DC2 vpn peer1: 2.2.2.2 (LNG2 - BGP) BGP peer: 10.98.50.10 Route received 10.98.1.0/24 Azure vpn gw: 10.53.78.30 Source:…
Will there be asymmetric traffic if two tunnels have the same private address space defined or overlapped ?
Suppose I already have an S2S tunnel A on the vWAN with a private address space of 192.12.0.0/16, provided by the on-prem team, and a link IP address A. now need to create another S2S tunnel B on the same vWAN hub, with link IP address B. However, the…
How can I build VPN-gateway with type policy-based
How Can i deploy a policy based VPN gateway ? I know this can only be done via CLI / PS, but the scripts posted on this community does't work Error is Highperformance is not supported by Basic SKU, possible SKU VpnGw1,VpnGw2..... But the SKU VpnGw1 and…
Unable to ping or traceroute CISO ASA to Azure site-to-site VPN public IP
Team, we are unable to ping or trace the Azure site-to-site VPN public IP from our CISCO ASA. The traceroute result showing problem is somewhere inside the 104.44.0.0 network which is MSN. Could you please see the below traceroute result and give the…
change the local gateway in vpn site to site
i cannot change the local ip in azure portal
Azure Site-to-Site VPN NAT rules
Hey Guys! Im facing and issue with azure site-to-site vpn with NAT rules, I hope you can guide me to right track. My scope is to have a site-to-site connection between VNET_vpn and Remote site (its in place and works), then have the following NAT or…
Azure site to site VPN to OPNSense VPN
I have an Azure Site to Site VPN to an OPNSense using IPsec. I have tried a multitude of configurations and its not quite working. When I manually start the VPN it states that it is up in OPNSense but no data is being transferred. If I use ssh on a…
azure vpn (linux) not returning valid resources
I used Azure VPN Linux preview 3 or 4 weeks ago and it was working as expected. Trying recently, I see that there is no valid resources. List of valid resources from app registration: .
Site to Site VPN Connection
I have configured site to site VPN as per the Microsoft documentation. We have created: Vnet Vnet Gateway Local network gateway Connection We have configured with all the client's requirement. We are seeing connection status: Unknown We have also created…
Internet not working when i use Azure VPN (Point to Site)
Dear All, I configured a Azure Point to site vpn using Azure AD. Whenever i access the VPN from my Laptop, internet is not working. I unchecked use default gateway on remote network. Still not working.
No internet when connected to Azure VPN point to site
We use Azure VPN to connect our local laptops to our Azure VNet to then connect to Azure file shares. Within the last day our VPN connection still works, but then we lose all internet connections once connected to VPN. We have rest the VPN Gateway and…
Internet not working after I connect to Azure VPN (Point to Site)
Hi, We have a Azure VPN set up. The VPN is connected successfully from other machines except cooperate ones. The machines joining company domain were not able to access internet after connected with the Azure VPN. Could you please help me with this…