Επεξεργασία

Κοινή χρήση μέσω


iOS app protection policy settings

This article describes the app protection policy settings for iOS/iPadOS devices. The policy settings that are described can be configured for an app protection policy on the Settings pane in the portal when you make a new policy.

There are three categories of policy settings: Data relocation, Access requirements, and Conditional launch. In this article, the term policy-managed apps refers to apps that are configured with app protection policies.

Important

The Intune Managed Browser has been retired. Use Microsoft Edge for your protected Intune browser experience.

Data protection

Important

For apps that have updated to v19.7.6 or later for Xcode 15 and v20.2.1 or later for Xcode 16 of the SDK, screen capture block will be applied if you have configured Send Org data to other apps setting to a value other than "All apps". You can configure app configuration policy setting com.microsoft.intune.mam.screencapturecontrol = Disabled (Apps > App configuration policies > Create > Managed apps > under the Settings step, select General configuration settings) if you need to allow screen capture for your iOS devices.

Data Transfer

Setting How to use Default value
Backup Org data to iTunes and iCloud backups Select Block to prevent this app from backing up work or school data to iTunes and iCloud. Select Allow to allow this app to back up of work or school data to iTunes and iCloud. Allow
Send Org data to other apps Specify what apps can receive data from this app:
  • All apps: Allow transfer to any app. The receiving app will have the ability to read and edit the data.
  • None: Don't allow data transfer to any app, including other policy-managed apps. If the user performs a managed open-in function and transfers a document, the data will be encrypted and unreadable.
  • Policy managed apps: Allow transfer only to other policy-managed apps.

    Note: Users may be able to transfer content via Open-in or Share extensions to unmanaged apps on unenrolled devices or enrolled devices that allow sharing to unmanaged apps. Transferred data is encrypted by Intune and unreadable by unmanaged apps.

  • Policy managed apps with OS sharing: Only allow data transfer to other policy managed apps, as well as file transfers to other MDM managed apps on enrolled devices.

    Note: The Policy managed apps with OS sharing value is applicable to MDM enrolled devices only. If this setting is targeted to a user on an unenrolled device, the behavior of the Policy managed apps value applies. Users will be able to transfer unencrypted content via Open-in or Share extensions to any application allowed by the iOS MDM allowOpenFromManagedtoUnmanaged setting, assuming the sending app has the IntuneMAMUPN and IntuneMAMOID configured; for more information, see How to manage data transfer between iOS apps in Microsoft Intune. See https://developer.apple.com/business/documentation/Configuration-Profile-Reference.pdf for more information on this iOS/iPadOS MDM setting.

  • Policy managed apps with Open-In/Share filtering: Allow transfer only to other policy managed apps, and filter OS Open-in/Share dialogs to only display policy managed apps. To configure the filtering of the Open-In/Share dialog, it requires both the app(s) acting as the file/document source and the app(s) that can open this file/document to have the Intune SDK for iOS version 8.1.1 or above.

    Note: Users may be able to transfer content via Open-in or Share extensions to unmanaged apps if Intune private data type is supported by the app. Transferred data is encrypted by Intune and unreadable by unmanaged apps.


Spotlight search (enables searching data within apps) and Siri shortcuts are blocked unless set to All apps.

This policy can also apply to iOS/iPadOS Universal Links. General web links are managed by the Open app links in Intune Managed Browser policy setting.

There are some exempt apps and services to which Intune may allow data transfer by default. In addition, you can create your own exemptions if you need to allow data to transfer to an app that doesn't support Intune APP. See data transfer exemptions for more information.

All apps
    Select apps to exempt
This option is available when you select Policy managed apps for the previous option.
    Select universal links to exempt
Specify which iOS/iPadOS Universal Links should open in the specified unmanaged application instead of the protected browser specified by the Restrict web content transfer with other apps setting. You must contact the application developer to determine the correct universal link format for each application.
    Select managed universal links
Specify which iOS/iPadOS Universal Links should open in the specified managed application instead of the protected browser specified by the Restrict web content transfer with other apps setting. You must contact the application developer to determine the correct universal link format for each application.
    Save copies of org data
Choose Block to disable the use of the Save As option in this app. Choose Allow if you want to allow the use of Save As. When set to Block, you can configure the setting Allow user to save copies to selected services.

Note:
  • This setting is supported for Microsoft Excel, OneNote, Outlook, PowerPoint, Word, and Microsoft Edge. It can also be supported by third-party and LOB apps.
  • This setting is only configurable when the setting Send org data to other apps is set to Policy managed apps, Policy managed apps with OS sharing or Policy managed apps with Open-In/Share filtering.
  • This setting will be "Allow" when the setting Send org data to other apps is set to All apps.
  • This setting will be "Block" with no allowed service locations when the setting Send org data to other apps is set to None.
Allow
      Allow user to save copies to selected services
Users can save to the selected services (OneDrive for Business, SharePoint, Photo Library, and Local Storage). All other services are blocked. OneDrive for Business: you can save files to OneDrive for Business and SharePoint Online. SharePoint: you can save files to on-premises SharePoint. Photo Library: You can save files to photo library locally. Local Storage: managed apps can save copies of org data locally. This does NOT include saving files to the local unmanaged locations such as the Files app on the device. 0 selected
    Transfer telecommunication data to
Typically, when a user selects a hyperlinked phone number in an app, a dialer app will open with the phone number prepopulated and ready to call. For this setting, choose how to handle this type of content transfer when it is initiated from a policy-managed app:
  • None, do not transfer this data between apps: Don't transfer communication data when a phone number is detected.
  • A specific dialer app: Allow a specific managed dialer app to initiate contact when a phone number is detected.
  • Any dialer app: Allow any managed dialer app to be used to initiate contact when a phone number is detected.

Note: This setting requires Intune SDK 12.7.0 and later. If your apps rely on dialer functionality and aren't using the correct Intune SDK version, as a workaround, consider adding "tel;telprompt" as a data transfer exemption. Once the apps support the correct Intune SDK version, the exemption can be removed.

Any dialer app
      Dialer App URL Scheme
When a specific dialer app has been selected, you must provide the dialer app URL scheme that is used to launch the dialer app on iOS devices. For more information, see Apple's documentation about Phone Links. Blank
    Transfer messaging data to
Typically, when a user selects a hyperlinked messaging link in an app, a messaging app will open with the phone number prepopulated and ready to send. For this setting, choose how to handle this type of content transfer when it's initiated from a policy-managed app. Additional steps may be necessary in order for this setting to take effect. First, verify that sms has been removed from the Select apps to exempt list. Then, ensure the application is using a newer version of Intune SDK (Version > 19.0.0). For this setting, choose how to handle this type of content transfer when it is initiated from a policy-managed app:
  • None, do not transfer this data between apps: Don't transfer communication data when a phone number is detected.
  • A specific messaging app: Allow a specific managed messaging app to initiate contact when a phone number is detected.
  • Any messaging app: Allow any managed messaging app to be used to initiate contact when a phone number is detected.

Note: This setting requires Intune SDK 19.0.0 and later.

Any messaging app
      Messaging App URL Scheme
When a specific messaging app has been selected, you must provide the messaging app URL scheme that is used to launch the messaging app on iOS devices. For more information, see Apple's documentation about Phone Links. Blank
Receive data from other apps Specify what apps can transfer data to this app:
  • All apps: Allow data transfer from any app.
  • None: Don't allow data transfer from any app, including other policy-managed apps.
  • Policy managed apps: Allow transfer only from other policy-managed apps.
  • All apps with incoming Org data: Allow data transfer from any app. Treat all incoming data without a user identity as data from your organization. The data will be marked with the MDM enrolled user's identity as defined by the IntuneMAMUPN setting.

    Note: The All apps with incoming Org data value is applicable to MDM enrolled devices only. If this setting is targeted to a user on an unenrolled device, the behavior of the Any apps value applies.

Multi-identity MAM enabled applications will attempt to switch to an unmanaged account when receiving unmanaged data if this setting is configured to None or Policy managed apps. If there's no unmanaged account signed into the app or the app is unable to switch, the incoming data will be blocked.

All apps
    Open data into Org documents
Select Block to disable the use of the Open option or other options to share data between accounts in this app. Select Allow if you want to allow the use of Open.

When set to Block you can configure the Allow user to open data from selected services to specify which services are allowed for Org data locations.

Note:
  • This setting is only configurable when the setting Receive data from other apps is set to Policy managed apps.
  • This setting will be "Allow" when the setting Receive data from other apps is set to All apps or All apps with incoming Org data.
  • This setting will be "Block" with no allowed service locations when the setting Receive data from other apps is set to None.
  • The following apps support this setting:
    • OneDrive 11.45.3 or later.
    • Outlook for iOS 4.60.0 or later.
    • Teams for iOS 3.17.0 or later.
Allow
      Allow users to open data from selected services
Select the application storage services that users can open data from. All other services are blocked. Selecting no services will prevent users from opening data from external locations.
Note: This control is designed to work on data that is outside of the corporate container.

Supported services:
  • OneDrive for Business
  • SharePoint Online
  • Camera
  • Photo Library
Note: Camera doesn't include Photos or Photo Gallery access. When selecting Photo Library in the Allow users to open data from selected services setting within Intune, you can allow managed accounts to allow incoming data from their device's photo library to their managed apps.
All selected
Restrict cut, copy and paste between other apps Specify when cut, copy, and paste actions can be used with this app. Select from:
  • Blocked: Don't allow cut, copy, and paste actions between this app and any other app.
  • Policy managed apps: Allow cut, copy, and paste actions between this app and other policy-managed apps.
  • Policy managed with paste in: Allow cut or copy between this app and other policy-managed apps. Allow data from any app to be pasted into this app.
  • Any app: No restrictions for cut, copy, and paste to and from this app.
Any app
    Cut and copy character limit for any app
Specify the number of characters that may be cut or copied from Org data and accounts. This will allow sharing of the specified number of characters to any application, regardless of the Restrict cut, copy, and paste with other apps setting.

Default Value = 0

Note: Requires app to have Intune SDK version 9.0.14 or later.

0
Third party keyboards Choose Block to prevent the use of third-party keyboards in managed applications.

When this setting is enabled, the user receives a one-time message stating that the use of third-party keyboards is blocked. This message appears the first time a user interacts with organizational data that requires the use of a keyboard. Only the standard iOS/iPadOS keyboard is available while using managed applications, and all other keyboard options are disabled. This setting will affect both the organization and personal accounts of multi-identity applications. This setting doesn't affect the use of third-party keyboards in unmanaged applications.

Note: This feature requires the app to use Intune SDK version 12.0.16 or later. Apps with SDK versions from 8.0.14 to, and including, 12.0.15, won't have this feature correctly apply for multi-identity apps. For more details, see Known issue: Third party keyboards aren't blocked in iOS/iPadOS for personal accounts.

Allow

Note

An app protection policy is required with IntuneMAMUPN for managed devices. This applies for any setting that requires enrolled devices as well.

Encryption

Setting How to use Default value
Encrypt Org data Choose Require to enable encryption of work or school data in this app. Intune enforces iOS/iPadOS device-level encryption to protect app data while the device is locked. In addition, applications may optionally encrypt app data using Intune APP SDK encryption. Intune APP SDK uses iOS/iPadOS cryptography methods to apply 256-bit AES encryption to app data.

When you enable this setting, the user may be required to set up and use a device PIN to access their device. If there's no device PIN and encryption is required, the user is prompted to set a PIN with the message "Your organization has required you to first enable a device PIN to access this app."

Go to the official Apple documentation to read more about their Data Protection Classes, as part of their Apple Platform Security.
Require

Functionality

Setting How to use Default value
Sync policy managed app data with native apps or add-ins Choose Block to prevent policy managed apps from saving data to the device's native apps (Contacts, Calendar and widgets) and to prevent the use of add-ins within the policy managed apps. If not supported by the application, saving data to native apps and using add-ins will be allowed.

If you choose Allow, the policy managed app can save data to the native apps or use add-ins, if those features are supported and enabled within the policy managed app.

Applications may provide additional controls to customize the data sync behavior to specific native apps or not honor this control.

Note: When you perform a selective wipe to remove work, or school data from the app, data synced directly from the policy managed app to the native app is removed. Any data synced from the native app to another external source won't be wiped.

Note: The following apps support this feature:
Allow
Printing Org data Select Block to prevent the app from printing work or school data. If you leave this setting to Allow, the default value, users will be able to export and print all Org data. Allow
Restrict web content transfer with other apps Specify how web content (http/https links) is opened from policy-managed applications. Choose from:
  • Any app: Allow web links in any app.
  • Intune Managed Browser: Allow web content to open only in the Intune Managed Browser. This browser is a policy-managed browser.
  • Microsoft Edge: Allow web content to open only in the Microsoft Edge. This browser is a policy-managed browser.
  • Unmanaged browser: Allow web content to open only in the unmanaged browser defined by Unmanaged browser protocol setting. The web content will be unmanaged in the target browser.
    Note: Requires app to have Intune SDK version 11.0.9 or later.
If you're using Intune to manage your devices, see Manage Internet access using managed browser policies with Microsoft Intune.

If a policy-managed browser is required but not installed, your end users will be prompted to install Microsoft Edge.

If a policy-managed browser is required, iOS/iPadOS Universal Links are managed by the Send Org data to other apps policy setting.

Intune device enrollment
If you are using Intune to manage your devices, see Manage Internet access using managed browser policies with Microsoft Intune.

Policy-managed Microsoft Edge
The Microsoft Edge browser for mobile devices (iOS/iPadOS and Android) supports Intune app protection policies. Users who sign in with their corporate Microsoft Entra accounts in the Microsoft Edge browser application will be protected by Intune. The Microsoft Edge browser integrates the Intune SDK and supports all of its data protection policies, with the exception of preventing:

  • Save-as: The Microsoft Edge browser doesn't allow a user to add direct, in-app connections to cloud storage providers (such as OneDrive).
  • Contact sync: The Microsoft Edge browser doesn't save to native contact lists.

Note: The Intune SDK cannot determine if a target app is a browser. On iOS/iPadOS devices, no other managed browser apps are allowed.
Not configured
    Unmanaged Browser Protocol
Enter the protocol for a single unmanaged browser. Web content (http/https links) from policy managed applications will open in any app that supports this protocol. The web content will be unmanaged in the target browser.

This feature should only be used if you want to share protected content with a specific browser that isn't enabled using Intune app protection policies. You must contact your browser vendor to determine the protocol supported by your desired browser.

Note: Include only the protocol prefix. If your browser requires links of the form mybrowser://www.microsoft.com, enter mybrowser.
Links will be translated as:
  • http://www.microsoft.com > mybrowser://www.microsoft.com
  • https://www.microsoft.com > mybrowsers://www.microsoft.com
Blank
Org data notifications Specify how Org data is shared via OS notifications for Org accounts. This policy setting will impact the local device and any connected devices such as wearables and smart speakers. Apps may provide additional controls to customize notification behavior or may choose to not honor all values. Select from:
  • Blocked: Don't share notifications.
    • If not supported by the application, notifications will be allowed.
  • Block org Data: Don't share Org data in notifications, for example.
    • "You have new mail"; "You have a meeting".
    • If not supported by the application, notifications will be allowed.
  • Allow: Shares Org data in the notifications.

Note:
This setting requires the following app support:

  • Outlook for iOS 4.34.0 or later
  • Teams for iOS 2.0.22 or later
  • Microsoft 365 (Office) for iOS 2.72 or later
Allow

Note

None of the data protection settings control the Apple managed open-in feature on iOS/iPadOS devices. To use manage Apple open-in, see Manage data transfer between iOS/iPadOS apps with Microsoft Intune.

Data transfer exemptions

There are some exempt apps and platform services that Intune app protection policy may allow data transfer to and from in certain scenarios. This list is subject to change and reflects the services and apps considered useful for secure productivity.

Third party unmanaged apps can be added to the exemptions list which can allow data transfer exceptions. For additional details and examples, see How to create exceptions to the Intune App Protection Policy (APP) data transfer policy. The exempt unmanaged app must be invoked based on iOS URL protocol. For example, when data transfer exemption is added for an unmanaged app, it would still prevent users from cut, copy, and paste operations, if restricted by policy. This type of exemption would also still prevent users from using Open-in action within a managed app to share or save data to exempt app since it isn't based on iOS URL protocol. For more information about Open-in, see Use app protection with iOS apps.

App/service name(s) Description
skype Skype
app-settings Device settings
itms; itmss; itms-apps; itms-appss; itms-services App Store
calshow Native Calendar

Important

App Protection policies created before June 15, 2020 include tel and telprompt URL scheme as part of the default data transfer exemptions. These URL schemes allow managed apps to initiate the dialer. The App Protection policy setting Transfer telecommunication data to has replaced this functionality. Administrators should remove tel;telprompt; from the data transfer exemptions and rely on the App Protection policy setting, provided the managed apps that initiate dialer functionality include the Intune SDK 12.7.0 or later.

Important

In Intune SDK 14.5.0 or later, including sms and mailto URL schemes in the data transfer exemptions will also allow sharing of Org data to the MFMessageCompose (for sms) and MFMailCompose (for mailto) view controllers within policy managed applications.

Universal links allow the user to directly launch an application associated with the link instead of a protected browser specified by the Restrict web content transfer with other apps setting. You must contact the application developer to determine correct universal link format for each application.

Default App Clip Links are also managed by universal link policy.

By adding Universal Links to unmanaged apps, you can launch the specified application. To add the app, you must add the link to the exemption list.

Caution

The target applications for these Universal Links are unmanaged and adding an exemption may result in data security leaks.

The default app Universal Link exemptions are the following:

App Universal Link Description
http://maps.apple.com; https://maps.apple.com Maps App
http://facetime.apple.com; https://facetime.apple.com FaceTime App

If you don't want to allow the default Universal Link exemptions, you can delete them. You can also add Universal Links for third party or LOB apps. The exempted universal links allow for wildcards such as http://*.sharepoint-df.com/*.

By adding Universal Links to managed apps, you can launch the specified application securely. To add the app, you must add the app's universal link to the managed list. If the target application supports Intune App Protection policy, selecting the link will attempt to launch the app. If the app isn't able to open, the link is opened in the protected browser. If the target application doesn't integrate the Intune SDK, selecting the link will launch the protected browser.

The default managed Universal Links are the following:

Managed App Universal Link Description
http://*.onedrive.com/*; https://*.onedrive.com/*; OneDrive
http://*.appsplatform.us/*; http://*.powerapps.cn/*; http://*.powerapps.com/*; http://*.powerapps.us/*; https://*.powerbi.com/*; https://app.powerbi.cn/*; https://app.powerbigov.us/*; https://app.powerbi.de/*; PowerApps
http://*.powerbi.com/*; http://app.powerbi.cn/*; http://app.powerbigov.us/*; http://app.powerbi.de/*; https://*.appsplatform.us/*; https://*.powerapps.cn/*; https://*.powerapps.com/*; https://*.powerapps.us/*; Power BI
http://*.service-now.com/*; https://*.service-now.com/*; ServiceNow
http://*.sharepoint.com/*; http://*.sharepoint-df.com/*; https://*.sharepoint.com/*; https://*.sharepoint-df.com/*; SharePoint
http://web.microsoftstream.com/video/*; http://msit.microsoftstream.com/video/*; https://web.microsoftstream.com/video/*; https://msit.microsoftstream.com/video/*; Stream
http://*teams.microsoft.com/l/*; http://*devspaces.skype.com/l/*; http://*teams.live.com/l/*; http://*collab.apps.mil/l/*; http://*teams.microsoft.us/l/*; http://*teams-fl.microsoft.com/l/*; https://*teams.microsoft.com/l/*; https://*devspaces.skype.com/l/*; https://*teams.live.com/l/*; https://*collab.apps.mil/l/*; https://*teams.microsoft.us/l/*; https://*teams-fl.microsoft.com/l/*; Teams
http://tasks.office.com/*; https://tasks.office.com/*; http://to-do.microsoft.com/sharing*; https://to-do.microsoft.com/sharing*; ToDo
http://*.yammer.com/*; https://*.yammer.com/*; Viva Engage
http://*.zoom.us/*; https://*.zoom.us/*; Zoom

If you don't want to allow the default managed Universal Links, you can delete them. You can also add Universal Links for third party or LOB apps.

Access requirements

Setting How to use Default value
PIN for access Select Require to require a PIN to use this app. The user is prompted to set up this PIN the first time they run the app in a work or school context. The PIN is applied when working either online or offline.

You can configure the PIN strength using the settings available under the PIN for access section.

Note: End-users that are allowed to access the app can reset the app PIN. This setting may not be visible in some cases on iOS devices. iOS devices have a maximum limitation of four available shortcuts. In order to view the reset APP PIN shortcut, the end user may need to access the shortcut from a different managed app.
Require
    PIN type
Set a requirement for either numeric or passcode type PINs before accessing an app that has app protection policies applied. Numeric requirements involve only numbers, while a passcode can be defined with at least 1 alphabetical letter or at least 1 special character.

Note: To configure passcode type, it requires app to have Intune SDK version 7.1.12 or above. Numeric type has no Intune SDK version restriction. Special characters allowed include the special characters and symbols on the iOS/iPadOS English language keyboard.
Numeric
    Simple PIN
Select Allow to allow users to use simple PIN sequences like 1234, 1111, abcd or aaaa. Select Block to prevent them from using simple sequences. Simple sequences are checked in 3 character sliding windows. If Block is configured, 1235 or 1112 wouldn't be accepted as PIN set by the end user, but 1122 would be allowed.

Note: If Passcode type PIN is configured, and Allow simple PIN is set to Yes, the user needs at least 1 letter or at least 1 special character in their PIN. If Passcode type PIN is configured, and Allow simple PIN is set to No, the user needs at least 1 number and 1 letter and at least 1 special character in their PIN.
Allow
    Select minimum PIN length
Specify the minimum number of digits in a PIN sequence. 4
    Touch ID instead of PIN for access (iOS 8+)
Select Allow to allow the user to use Touch ID instead of a PIN for app access. Allow
      Override Touch ID with PIN after timeout
To use this setting, select Require and then configure an inactivity timeout. Require
        Timeout (minutes of inactivity)
Specify a time in minutes after which either a passcode or numeric (as configured) PIN will override the use of a fingerprint or face as method of access. This timeout value should be greater than the value specified under 'Recheck the access requirements after (minutes of inactivity)'. 30
      Face ID instead of PIN for access (iOS 11+)
Select Allow to allow the user to use facial recognition technology to authenticate users on iOS/iPadOS devices. If allowed, Face ID must be used to access the app on a Face ID capable device. Allow
    PIN reset after number of days
Select Yes to require users to change their app PIN after a set period of time, in days.

When set to Yes, you then configure the number of days before the PIN reset is required.
No
      Number of days
Configure the number of days before the PIN reset is required. 90
    App PIN when device PIN is set
Select Disable to disable the app PIN when a device lock is detected on an enrolled device with Company Portal configured.

Note: Requires app to have Intune SDK version 7.0.1 or above. The IntuneMAMUPN setting must be configured for applications to detect the enrollment state.

On iOS/iPadOS devices, you can let the user prove their identity by using Touch ID or Face ID instead of a PIN. Intune uses the LocalAuthentication API to authenticate users using Touch ID and Face ID. To learn more about Touch ID and Face ID, see the iOS Security Guide.

When the user tries to use this app with their work or school account, they're prompted to provide their fingerprint identity or face identity instead of entering a PIN. When this setting is enabled, the App-switcher preview image will be blurred while using a work or school account. If there's any change to the device's biometric database, Intune prompts the user for a PIN when the next inactivity timeout value is met. Changes to biometric data include the addition or removal of a fingerprint or face for authentication. If the Intune user doesn't have a PIN set, they're led to set up an Intune PIN.
Enable
Work or school account credentials for access Select Require to require the user to sign in with their work or school account instead of entering a PIN for app access. If you set this to Require, and PIN or biometric prompts are turned on, both corporate credentials and either the PIN or biometric prompts are shown. Not required
Recheck the access requirements after (minutes of inactivity) Configure the number of minutes of inactivity that must pass before the app requires the user to again specify the access requirements.

For example, an admin turns on PIN and Blocks rooted devices in the policy, a user opens an Intune-managed app, must enter a PIN, and must be using the app on a nonrooted device. When using this setting, the user wouldn't have to enter a PIN or undergo another root-detection check on any Intune-managed app for a period of time equal to the configured value.

Note: On iOS/iPadOS, the PIN is shared amongst all Intune-managed apps of the same publisher. The PIN timer for a specific PIN is reset once the app leaves the foreground on the device. The user wouldn't have to enter a PIN on any Intune-managed app that shares its PIN for the duration of the timeout defined in this setting. This policy setting format supports a positive whole number.
30

Note

To learn more about how multiple Intune app protection settings configured in the Access section to the same set of apps and users work on iOS/iPadOS, see Intune MAM frequently asked questions and Selectively wipe data using app protection policy access actions in Intune.

Conditional launch

Configure conditional launch settings to set sign-in security requirements for your access protection policy.

By default, several settings are provided with pre-configured values and actions. You can delete some of these, like the Min OS version. You can also select additional settings from the Select one dropdown.

Setting How to use
Max OS version Specify a maximum iOS/iPadOS operating system to use this app.

Actions include:

  • Warn - The user will see a notification if the iOS/iPadOS version on the device doesn't meet the requirement. This notification can be dismissed.
  • Block access - The user will be blocked from access if the iOS/iPadOS version on the device doesn't meet this requirement.
  • Wipe data - The user account that is associated with the application is wiped from the device.

This entry can appear multiple times, with each instance supporting a different action.

This policy setting format supports either major.minor, major.minor.build, major.minor.build.revision.

Note: Requires app to have Intune SDK version 14.4.0 or above.
Min OS version Specify a minimum iOS/iPadOS operating system to use this app.

Actions include:

  • Warn - The user will see a notification if the iOS/iPadOS version on the device doesn't meet the requirement. This notification can be dismissed.
  • Block access - The user will be blocked from access if the iOS/iPadOS version on the device doesn't meet this requirement.
  • Wipe data - The user account that is associated with the application is wiped from the device.
This entry can appear multiple times, with each instance supporting a different action.

This policy setting format supports either major.minor, major.minor.build, major.minor.build.revision.

Note: Requires app to have Intune SDK version 7.0.1 or above.
Max PIN attempts Specify the number of tries the user has to successfully enter their PIN before the configured action is taken. If the user fails to successfully enter their PIN after the maximum PIN attempts, the user must reset their pin after successfully logging into their account and completing a multi-factor authentication (MFA) challenge if required. This policy setting format supports a positive whole number.

Actions include:

  • Reset PIN - The user must reset their PIN.
  • Wipe data - The user account that is associated with the application is wiped from the device.
Default value = 5
Offline grace period The number of minutes that policy-managed apps can run offline. Specify the time (in minutes) before the access requirements for the app are rechecked.

Actions include:

  • Block access (minutes) - The number of minutes that policy-managed apps can run offline. Specify the time (in minutes) before the access requirements for the app are rechecked. After the configured period expires, the app blocks access to work or school data until network access is available. The Offline grace period timer for blocking data access is calculated individually for each app based on last check-in with the Intune service. This policy-setting format supports a positive whole number.

    Default value = 1440 minutes (24 hours)

    Note: Configuring the Offline grace period timer for blocking access to be less than the default value may result in more frequent user interruptions as policy is refreshed. Choosing a value of less than 30 mins isn't recommended as it may result in user interruptions at each application launch or resume.

    Note: Stopping the Offline grace period policy refresh, including closing or suspending the application, will result in user interruption at the next app launch or resume.

  • Wipe data (days) - After this many days (defined by the admin) of running offline, the app will require the user to connect to the network and reauthenticate. If the user successfully authenticates, they can continue to access their data and the offline interval will reset. If the user fails to authenticate, the app will perform a selective wipe of the users' account and data. See How to wipe only corporate data from Intune-managed apps for more information on what data is removed with a selective wipe. The Offline grace period timer for wiping data is calculated individually for each app based on last check-in with the Intune service. This policy setting format supports a positive whole number.

    Default value = 90 days
This entry can appear multiple times, with each instance supporting a different action.
Jailbroken/rooted devices There is no value to set for this setting.

Actions include:

  • Block access - Prevent this app from running on jailbroken or rooted devices. The user continues to be able to use this app for personal tasks, but must use a different device to access work or school data in this app.
  • Wipe data - The user account that is associated with the application is wiped from the device.
Disabled account There is no value to set for this setting.

Actions include:

  • Block access - When we have confirmed the user has been disabled in Microsoft Entra ID, the app blocks access to work or school data.
  • Wipe data - When we have confirmed the user has been disabled in Microsoft Entra ID, the app will perform a selective wipe of the users' account and data.
Min app version Specify a value for the minimum application version value.

Actions include:

  • Warn - The user sees a notification if the app version on the device doesn't meet the requirement. This notification can be dismissed.
  • Block access - The user is blocked from access if the app version on the device doesn't meet the requirement.
  • Wipe data - The user account that is associated with the application is wiped from the device.
As apps often have distinct versioning schemes between them, create a policy with one minimum app version targeting one app (for example, Outlook version policy).

This entry can appear multiple times, with each instance supporting a different action.

This policy setting supports matching iOS app bundle version formats (major.minor or major.minor.patch).

Note: Requires app to have Intune SDK version 7.0.1 or above.

Additionally, you can configure where your end users can get an updated version of a line-of-business (LOB) app. End users will see this in the min app version conditional launch dialog, which will prompt end users to update to a minimum version of the LOB app. On iOS/iPadOS, this feature requires the app to be integrated (or wrapped using the wrapping tool) with the Intune SDK for iOS v. 10.0.7 or above. To configure where an end user should update a LOB app, the app needs a managed app configuration policy sent to it with the key, com.microsoft.intune.myappstore. The value sent will define which store the end user will download the app from. If the app is deployed via the Company Portal, the value must be CompanyPortal. For any other store, you must enter a complete URL.
Min SDK version Specify a minimum value for the Intune SDK version.

Actions include:

  • Block access - The user is blocked from access if the app's Intune app protection policy SDK version doesn't meet the requirement.
  • Wipe data - The user account that is associated with the application is wiped from the device.
  • Warn - The user will see a notification if the iOS/iPadOS SDK version for the app doesn't meet the minimum SDK requirement. The user will be instructed to upgrade to the latest version of the app. This notification can be dismissed.
To learn more about the Intune app protection policy SDK, see Intune App SDK overview. As apps often have distinct Intune SDK version between them, create a policy with one min Intune SDK version targeting one app (for example, Intune SDK version policy for Outlook).

This entry can appear multiple times, with each instance supporting a different action.
Device model(s) Specify a semi-colon separated list of model identifier(s). These values aren't case sensitive.

Actions include:

  • Allow specified (Block non-specified) - Only devices that match the specified device model can use the app. All other device models are blocked.
  • Allow specified (Wipe non-specified) - The user account that is associated with the application is wiped from the device.
For more information on using this setting, see Conditional Launch actions.
Max allowed device threat level App protection policies can take advantage of the Intune-MTD connector. Specify a maximum threat level acceptable to use this app. Threats are determined by your chosen Mobile Threat Defense (MTD) vendor app on the end user device. Specify either Secured, Low, Medium, or High. Secured requires no threats on the device and is the most restrictive configurable value, while High essentially requires an active Intune-to-MTD connection.

Actions include:

  • Block access - The user will be blocked from access if the threat level determined by your chosen Mobile Threat Defense (MTD) vendor app on the end user device doesn't meet this requirement.
  • Wipe data - The user account that is associated with the application is wiped from the device.
Note: Requires app to have Intune SDK version 12.0.15 or above.

For more information on using this setting, see Enable MTD for unenrolled devices.
Primary MTD service If you have configured multiple Intune-MTD connectors, specify the primary MTD vendor app that should be used on the end user device.

Values include:

  • Microsoft Defender for Endpoint - if the MTD connector is configured, specify Microsoft Defender for Endpoint will provide the device threat level information.
  • Mobile Threat Defense (Non-Microsoft) - if the MTD connector is configured, specify the non-Microsoft MTD will provide the device threat level information.

You must configure the setting "Max allowed device threat level" to use this setting.

There are no Actions for this setting.

Non-working time There is no value to set for this setting.

Actions include:

  • Block access - The user is blocked from access because the user account that is associated with the application is in non-working time.
  • Warn - The user sees a notification if the user account that is associated with the application is in non-working time. The notification can be dismissed.
Note: This setting must only be configured if the tenant has been integrated with the Working Time API. For more information about integrating this setting with the Working Time API, see Limit access to Microsoft Teams when frontline workers are off shift. Configuring this setting without integrating with the Working Time API could result in accounts getting blocked due to missing working time status for the managed account associated with the application.

The following apps support this feature:

  • Teams for iOS v6.9.2 or later
  • Edge for iOS v126.2592.56 or later

Learn more