IMessage Interface
public interface IMessage
Represents the message that is exchanged between Azure Service Bus and its clients.
Method Summary
| Modifier and Type | Method and Description |
|---|---|
| abstract IMessage |
createCopy()
Creates a shallow copy of this message. |
| abstract byte[] |
getBody()
Deprecated
Message body need not just a byte array. Replaced by getMessageBody()
Gets the body of this message as a byte array. |
| abstract String |
getContentType()
Gets the content type of this message. |
| abstract String |
getCorrelationId()
Gets a correlation identifier. |
| abstract String |
getDeadLetterSource()
Gets the name of the queue or subscription that this message was enqueued on, before it was deadlettered. |
| abstract long |
getDeliveryCount()
Gets the number of the times this message was delivered to clients. |
| abstract Instant |
getEnqueuedTimeUtc()
Gets the instant at which this message was enqueued in Azure Service Bus. |
| abstract Instant |
getExpiresAtUtc()
Gets the instant at which this message will expire. |
| abstract String |
getLabel()
Gets the application specific message label. |
| abstract UUID |
getLockToken()
Gets the lock token for the current message. |
| abstract Instant |
getLockedUntilUtc()
Gets the instant at which the lock of this message expires. |
|
abstract
Message |
getMessageBody()
Gets the body of this message. |
| abstract String |
getMessageId()
Gets the Id of this message. |
| abstract String |
getPartitionKey()
Gets the partition key for sending a message to a partitioned entity. |
| abstract Map<String,Object> |
getProperties()
Gets the map of user application properties of this message. |
| abstract String |
getReplyTo()
Gets the address of an entity to send replies to. |
| abstract String |
getReplyToSessionId()
Gets or sets a session identifier augmenting the getReplyTo() address. |
| abstract Instant |
getScheduledEnqueueTimeUtc()
Gets the scheduled enqueue time of this message. |
| abstract Instant |
getScheduledEnqueuedTimeUtc()
Deprecated
Replaced by getScheduledEnqueueTimeUtc()
Gets the scheduled enqueue time of this message. |
| abstract long |
getSequenceNumber()
Gets the unique number assigned to a message by Service Bus. |
| abstract String |
getSessionId()
Gets the session identifier for a session-aware entity. |
| abstract Duration |
getTimeToLive()
Gets the duration before this message expires. |
| abstract String |
getTo()
Gets the "to" address. |
| abstract String |
getViaPartitionKey()
Gets the partition key for sending a message to a entity via another partitioned transfer entity. |
| abstract void |
setBody(byte[] body)
Deprecated
Message body need not just a byte array. Replaced by setMessageBody(MessageBody body)
Sets the body of this message as a byte array. |
| abstract void |
setContentType(String contentType)
Sets the content type of this message. |
| abstract void |
setCorrelationId(String correlationId)
Sets a correlation identifier. |
| abstract void |
setLabel(String label)
Sets an application specific message label. |
| abstract void |
setMessageBody(MessageBody body)
Sets the body of this message. |
| abstract void |
setMessageId(String messageId)
Sets the Id of this message. |
| abstract void |
setPartitionKey(String partitionKey)
Sets a partition key for sending a message to a partitioned entity |
| abstract void |
setProperties(Map<String,Object> properties)
Sets the map of user application properties of this message. |
| abstract void |
setReplyTo(String replyTo)
Sets the address of an entity to send replies to. |
| abstract void |
setReplyToSessionId(String replyToSessionId)
Gets or sets a session identifier augmenting the getReplyTo() address. |
| abstract void |
setScheduledEnqueueTimeUtc(Instant scheduledEnqueueTimeUtc)
Sets the scheduled enqueue time of this message. |
| abstract void |
setScheduledEnqueuedTimeUtc(Instant scheduledEnqueueTimeUtc)
Deprecated Sets the scheduled enqueue time of this message. |
| abstract void |
setSessionId(String sessionId)
Sets the session identifier for a session-aware entity. |
| abstract void |
setTimeToLive(Duration timeToLive)
Sets the duration of time before this message expires. |
| abstract void |
setTo(String to)
Sets the "to" address. |
| abstract void |
setViaPartitionKey(String viaPartitionKey)
Sets a via-partition key for sending a message to a destination entity via another partitioned entity |
Method Details
createCopy
public abstract IMessage createCopy()
Creates a shallow copy of this message.
Returns:
getBody
@Deprecated
public abstract byte[] getBody()
Deprecated
Gets the body of this message as a byte array. It is up to client applications to decode the bytes.
Returns:
getContentType
public abstract String getContentType()
Gets the content type of this message. Optionally describes the payload of the message, with a descriptor following the format of RFC2045, Section 5, for example "application/json". Note that content type is not same as message body type.
Returns:
getCorrelationId
public abstract String getCorrelationId()
Gets a correlation identifier. Allows an application to specify a context for the message for the purposes of correlation, for example reflecting the MessageId of a message that is being replied to.
Returns:
getDeadLetterSource
public abstract String getDeadLetterSource()
Gets the name of the queue or subscription that this message was enqueued on, before it was deadlettered. This value is only set in messages that have been dead-lettered and subsequently auto-forwarded from the dead-letter queue to another entity. Indicates the entity in which the message was dead-lettered. This property is read-only.
Returns:
getDeliveryCount
public abstract long getDeliveryCount()
Gets the number of the times this message was delivered to clients. The count is incremented when a message lock expires, or the message is explicitly abandoned by the receiver. This property is read-only.
Returns:
getEnqueuedTimeUtc
public abstract Instant getEnqueuedTimeUtc()
Gets the instant at which this message was enqueued in Azure Service Bus. The UTC instant at which the message has been accepted and stored in the entity. For scheduled messages, this reflects the time when the message was activated. This value can be used as an authoritative and neutral arrival time indicator when the receiver does not want to trust the sender's clock. This property is read-only.
Returns:
getExpiresAtUtc
public abstract Instant getExpiresAtUtc()
Gets the instant at which this message will expire. The value is the UTC instant for when the message is scheduled for removal and will no longer available for retrieval from the entity due to expiration. Expiry is controlled by the getTimeToLive() property. This property is computed from getEnqueuedTimeUtc()+getTimeToLive().
Returns:
getLabel
public abstract String getLabel()
Gets the application specific message label. This property enables the application to indicate the purpose of the message to the receiver in a standardized fashion, similar to an email subject line. The mapped AMQP property is "subject".
Returns:
getLockToken
public abstract UUID getLockToken()
Gets the lock token for the current message. The lock token is a reference to the lock that is being held by the broker in PEEKLOCK mode. Locks are used to explicitly settle messages as explained in the product documentation in more detail. The token can also be used to pin the lock permanently through the Deferral API and, with that, take the message out of the regular delivery state flow. This property is read-only.
Returns:
getLockedUntilUtc
public abstract Instant getLockedUntilUtc()
Gets the instant at which the lock of this message expires. For messages retrieved under a lock (peek-lock receive mode, not pre-settled) this property reflects the UTC instant until which the message is held locked in the queue/subscription. When the lock expires, the getDeliveryCount() is incremented and the message is again available for retrieval. This property is read-only.
Returns:
getMessageBody
public abstract MessageBody getMessageBody()
Gets the body of this message. Client applications should extract message content based on body type.
Returns:
getMessageId
public abstract String getMessageId()
Gets the Id of this message. The message identifier is an application-defined value that uniquely identifies the message and its payload. The identifier is a free-form string and can reflect a GUID or an identifier derived from the application context. If enabled, the duplicate detection feature identifies and removes second and further submissions of messages with the same MessageId.
Returns:
getPartitionKey
public abstract String getPartitionKey()
Gets the partition key for sending a message to a partitioned entity. For partitioned entities, setting this value enables assigning related messages to the same internal partition, so that submission sequence order is correctly recorded. The partition is chosen by a hash function over this value and cannot be chosen directly. For session-aware entities, the getSessionId() property overrides this value.
Returns:
getProperties
public abstract Map
Gets the map of user application properties of this message. Client applications can set user properties (headers) on the message using this map.
Returns:
getReplyTo
public abstract String getReplyTo()
Gets the address of an entity to send replies to. This optional and application-defined value is a standard way to express a reply path to the receiver of the message. When a sender expects a reply, it sets the value to the absolute or relative path of the queue or topic it expects the reply to be sent to.
Returns:
getReplyToSessionId
public abstract String getReplyToSessionId()
Gets or sets a session identifier augmenting the getReplyTo() address. This value augments the ReplyTo information and specifies which SessionId should be set for the reply when sent to the reply entity.
Returns:
getScheduledEnqueueTimeUtc
public abstract Instant getScheduledEnqueueTimeUtc()
Gets the scheduled enqueue time of this message. This value is used for delayed message availability. The message is safely added to the queue, but is not considered active and therefore not retrievable until the scheduled enqueue time. Mind that the message may not be activated (enqueued) at the exact given instant; the actual activation time depends on the queue's workload and its state.
Returns:
getScheduledEnqueuedTimeUtc
@Deprecated
public abstract Instant getScheduledEnqueuedTimeUtc()
Deprecated
Gets the scheduled enqueue time of this message. This value is used for delayed message availability. The message is safely added to the queue, but is not considered active and therefore not retrievable until the scheduled enqueue time. Mind that the message may not be activated (enqueued) at the exact given instant; the actual activation time depends on the queue's workload and its state.
Returns:
getSequenceNumber
public abstract long getSequenceNumber()
Gets the unique number assigned to a message by Service Bus. The sequence number is a unique 64-bit integer assigned to a message as it is accepted and stored by the broker and functions as its true identifier. For partitioned entities, the topmost 16 bits reflect the partition identifier. Sequence numbers monotonically increase and are gapless. They roll over to 0 when the 48-64 bit range is exhausted. This property is read-only.
Returns:
getSessionId
public abstract String getSessionId()
Gets the session identifier for a session-aware entity. For session-aware entities, this application-defined value specifies the session affiliation of the message. Messages with the same session identifier are subject to summary locking and enable exact in-order processing and demultiplexing. For session-unaware entities, this value is ignored.
Returns:
getTimeToLive
public abstract Duration getTimeToLive()
Gets the duration before this message expires. This value is the relative duration after which the message expires, starting from the instant the message has been accepted and stored by the broker, as captured in getEnqueuedTimeUtc(). When not set explicitly, the assumed value is the DefaultTimeToLive set for the respective queue or topic. A message-level TimeToLive value cannot be longer than the entity's DefaultTimeToLive setting and it is silently adjusted if it does.
Returns:
getTo
public abstract String getTo()
Gets the "to" address.
Returns:
getViaPartitionKey
public abstract String getViaPartitionKey()
Gets the partition key for sending a message to a entity via another partitioned transfer entity. If a message is sent via a transfer queue in the scope of a transaction, this value selects the transfer queue partition: This is functionally equivalent to getPartitionKey() and ensures that messages are kept together and in order as they are transferred.
Returns:
setBody
@Deprecated
public abstract void setBody(byte[] body)
Deprecated
Sets the body of this message as a byte array.
Parameters:
setContentType
public abstract void setContentType(String contentType)
Sets the content type of this message.
Parameters:
setCorrelationId
public abstract void setCorrelationId(String correlationId)
Sets a correlation identifier.
Parameters:
setLabel
public abstract void setLabel(String label)
Sets an application specific message label.
Parameters:
setMessageBody
public abstract void setMessageBody(MessageBody body)
Sets the body of this message.
Parameters:
setMessageId
public abstract void setMessageId(String messageId)
Sets the Id of this message.
Parameters:
setPartitionKey
public abstract void setPartitionKey(String partitionKey)
Sets a partition key for sending a message to a partitioned entity
Parameters:
setProperties
public abstract void setProperties(Map
Sets the map of user application properties of this message. Client applications can set user properties on the message using this map.
Parameters:
setReplyTo
public abstract void setReplyTo(String replyTo)
Sets the address of an entity to send replies to.
Parameters:
setReplyToSessionId
public abstract void setReplyToSessionId(String replyToSessionId)
Gets or sets a session identifier augmenting the getReplyTo() address.
Parameters:
setScheduledEnqueueTimeUtc
public abstract void setScheduledEnqueueTimeUtc(Instant scheduledEnqueueTimeUtc)
Sets the scheduled enqueue time of this message.
Parameters:
setScheduledEnqueuedTimeUtc
@Deprecated
public abstract void setScheduledEnqueuedTimeUtc(Instant scheduledEnqueueTimeUtc)
Deprecated
Sets the scheduled enqueue time of this message.
Parameters:
setSessionId
public abstract void setSessionId(String sessionId)
Sets the session identifier for a session-aware entity.
Parameters:
setTimeToLive
public abstract void setTimeToLive(Duration timeToLive)
Sets the duration of time before this message expires.
Parameters:
setTo
public abstract void setTo(String to)
Sets the "to" address. This property is reserved for future use in routing scenarios and presently ignored by the broker itself. Applications can use this value in rule-driven auto-forward chaining scenarios to indicate the intended logical destination of the message.
Parameters:
setViaPartitionKey
public abstract void setViaPartitionKey(String viaPartitionKey)
Sets a via-partition key for sending a message to a destination entity via another partitioned entity
Parameters:
