Mcp23s08 建構函式

參考

定義

命名空間:: Iot.Device.Mcp23xxx

組件:: Iot.Device.Bindings.dll

套件:: Iot.Device.Bindings v1.0.0

套件:: Iot.Device.Bindings v1.1.0

套件:: Iot.Device.Bindings v1.2.0

套件:: Iot.Device.Bindings v1.3.0

套件:: Iot.Device.Bindings v1.4.0

套件:: Iot.Device.Bindings v1.5.0

套件:: Iot.Device.Bindings v2.0.0

套件:: Iot.Device.Bindings v2.1.0

套件:: Iot.Device.Bindings v3.0.0

重要

部分資訊涉及發行前產品，在發行之前可能會有大幅修改。 Microsoft 對此處提供的資訊，不做任何明確或隱含的瑕疵擔保。

多載

Mcp23s08(SpiDevice, Int32, Int32, Int32, GpioController)
Mcp23s08(SpiDevice, Int32, Int32, Int32, GpioController, Boolean)	初始化 Mcp23s08 裝置的新實例。

Mcp23s08(SpiDevice, Int32, Int32, Int32, GpioController)

public Mcp23s08 (System.Device.Spi.SpiDevice spiDevice, int deviceAddress, int reset = -1, int interrupt = -1, System.Device.Gpio.GpioController masterController = default);

new Iot.Device.Mcp23xxx.Mcp23s08 : System.Device.Spi.SpiDevice * int * int * int * System.Device.Gpio.GpioController -> Iot.Device.Mcp23xxx.Mcp23s08

Public Sub New (spiDevice As SpiDevice, deviceAddress As Integer, Optional reset As Integer = -1, Optional interrupt As Integer = -1, Optional masterController As GpioController = Nothing)

參數

spiDevice: SpiDevice

deviceAddress: Int32

reset: Int32

interrupt: Int32

masterController: GpioController

適用於

Mcp23s08(SpiDevice, Int32, Int32, Int32, GpioController, Boolean)

初始化 Mcp23s08 裝置的新實例。

public Mcp23s08 (System.Device.Spi.SpiDevice spiDevice, int deviceAddress, int reset = -1, int interrupt = -1, System.Device.Gpio.GpioController? controller = default, bool shouldDispose = true);

new Iot.Device.Mcp23xxx.Mcp23s08 : System.Device.Spi.SpiDevice * int * int * int * System.Device.Gpio.GpioController * bool -> Iot.Device.Mcp23xxx.Mcp23s08

Public Sub New (spiDevice As SpiDevice, deviceAddress As Integer, Optional reset As Integer = -1, Optional interrupt As Integer = -1, Optional controller As GpioController = Nothing, Optional shouldDispose As Boolean = true)

參數

spiDevice: SpiDevice

用於通訊的 SPI 裝置。

deviceAddress: Int32

SPI 匯流排上連線的裝置位址。

reset: Int32

如果有的話，連接到硬體重設的輸出針腳編號。如果指定，裝置將會以停用狀態啟動。

interrupt: Int32

如果有任何，則為連接到中斷的輸入針腳編號。

controller: GpioController

重設和中斷針腳的控制器。如果未指定，則會使用預設控制器。

shouldDispose: Boolean

True 表示處置 Gpio 控制器

適用於