Remote NDIS Messages (Windows CE 5.0)
The following table shows the Remote NDIS messages with a description of the purpose of each.
| Programming element | Description |
|---|---|
| REMOTE_NDIS_HALT_MSG | This message is sent by the host to terminate the network connection. |
| REMOTE_NDIS_INDICATE_STATUS_MSG | This message is sent by a Remote NDIS device to a host to indicate a change in the status of the device. |
| REMOTE_NDIS_INITIALIZE_CMPLT | This message is sent by a Remote NDIS to the host in response to a REMOTE_NDIS_INITIALIZE_MSG message. |
| REMOTE_NDIS_INITIALIZE_MSG | This message is sent by the host to a Remote NDIS device to initialize the network connection. |
| REMOTE_NDIS_KEEPALIVE_CMPLT | This message is sent by a Remote NDIS device in response to a REMOTE_NDIS_KEEPALIVE_MSG message from the host. |
| REMOTE_NDIS_KEEPALIVE_MSG | This message is sent by the host when there has been no other control or data traffic from the device to the host for the bus defined KeepAliveTimeoutPeriod. |
| REMOTE_NDIS_PACKET_MSG | This message encapsulates NDIS data packets to form a single data message. |
| REMOTE_NDIS_QUERY_CMPLT | This message is sent by a Remote NDIS device in response to a REMOTE_NDIS_QUERY_MSG message. |
| REMOTE_NDIS_QUERY_MSG | This message is sent to a Remote NDIS device from a host when it needs to query the device for its characteristics, statistics information, or status. |
| REMOTE_NDIS_RESET_CMPLT | This message is sent by a Remote NDIS device in response to a REMOTE_NDIS_RESET_MSG message from the host. |
| REMOTE_NDIS_RESET_MSG | This message is sent by the host to a Remote NDIS device to reset the device and return status. |
| REMOTE_NDIS_SET_CMPLT | This message is sent by a Remote NDIS device responds to a REMOTE_NDIS_SET_MSG message. |
| REMOTE_NDIS_SET_MSG | This message is sent by the host to a Remote NDIS device when it needs to set the value of some operational parameter on the device. |
See Also
Send Feedback on this topic to the authors