REMOTE_NDIS_HALT_MSG (Windows CE 5.0)
This message is sent by the host to terminate the network connection.
REMOTE_NDIS_HALT_MSG(UINT32)NdisMessageType;(UINT32)MessageLength;(RNDIS_REQUEST_ID)RequestId;
Parameters
- NdisMessageType
Specifies the RNDIS message type, which is set to REMOTE_NDIS_HALT_MSG. - MessageLength
Specifies the total length of this RNDIS message in bytes. - RequestId
Specifies the Remote NDIS message identifier value. This value is used to match device responses to host sent messages.
Return Values
None.
Remarks
Implementation of REMOTE_NDIS_HALT_MSG is optional. If implemented, the device sends this message to the host through the control channel only when the device is in the rndis-initialized or rndis-data-initialized state. The device must terminate all communication immediately after sending this message. Sending this message causes the device to enter the rndis-uninitialized state.
Unlike the other host initiated control messages, there is no device response to REMOTE_NDIS_HALT_MSG. The message may be sent at any time that the device is in the rndis-initialized or rndis-data-initialized state. For more information about RNDIS device states, see RNDIS Concepts.
Requirements
OS Versions: Windows CE .NET 4.0 and later.
Header: Rndis.h.
See Also
RNDIS Concepts | REMOTE_NDIS_INITIALIZE_MSG | RNDIS_REQUEST_ID
Send Feedback on this topic to the authors