How to Use the BSP for the HP Compaq t5530 Thin Client Development Platform (Windows Embedded CE 6.0)
1/5/2010
You can use the sample board support package (BSP) provided by Windows Embedded CE 6.0 to quickly evaluate the new Windows Embedded CE OS features on the HP Compaq t5530 Thin Client Development Platform.
For more information about the sample BSPs included in Windows Embedded CE for x86 microprocessors, see x86 BSPs.
Hardware and Software Assumptions
- You included support for x86 microprocessors when you installed Platform Builder. If you did not, reinstall Platform Builder and include support for x86 microprocessors.
- You are downloading a Windows Embedded CE run-time image to an HP Compaq t5530 Thin Client Development Platform.
The following table shows the steps needed to use the BSP for the HP Compaq t5530 Thin Client Development Platform.
| Step | Topic |
|---|---|
1. Review the supported hardware and software features of the development platform and familiarize yourself with any limitations that might impact your run-time image. |
HP Compaq t5530 Thin Client Development Platform Supported Features |
2. Connect the device to the development workstation. |
Connecting the HP Compaq t5530 Thin Client Development Platform |
3. Configure a terminal program, such as Microsoft HyperTerminal, to receive debug messages. |
|
4. Build the run-time image. You must build the run-time image before you can download it to the device. |
|
5. Download the boot loader to the development platform. |
Downloading the Boot Loader to the HP Compaq t5530 Thin Client Development Platform |
6. Download the run-time image to the development platform. |
Downloading the Run-Time Image to the HP Compaq t5530 Thin Client Development Platform |
See Also
Concepts
x86 BSPs
Supported Board Support Packages
Standard Development Board Design