TI OMAP4470 Development Kit (Compact 2013)
10/16/2014
Windows Embedded Compact 2013 includes a board support package (BSP) for the TI OMAP4470 Blaze Tablet2 Development Platform, which uses a dual-core ARM Cortex A9 MP core with Symmetric Multiprocessing. When you install Platform Builder for Windows Embedded Compact 2013 with support for ARM processors, Platform Builder creates the following folder: %_WINCEROOT%\Platform\TI_SDP44XX.
This folder contains the Platform.bib file and other configuration files, the catalog items for the BSP, and source code for the boot loader, drivers, kernel independent transport layer (KITL), and OEM adaptation layer (OAL).
The following table describes the TI OMAP4470 Blaze Tablet2 Development Platform board support package (BSP) included in Platform Builder for Windows Embedded Compact 2013.
BSP |
TI OMAP4470 Blaze Tablet2 Development Platform |
|---|---|
CPU |
OMAP4470 |
Kernel to use |
ARMv7 |
Manufacturer |
Texas Instruments |
Part number |
TEVM4470 |
Ordering information |
Contact Texas Instruments or SVTronics |
Floating-point unit |
Yes (DSP) |
Instruction set |
ARMv7 |
Name in Platform Builder |
TI_SDP44XX |
Sample code directory |
%_WINCEROOT%\Platform\TI_SDP44XX |
BSP usage information |
Supported Features
The following table lists the features available in the TI OMAP4470 Blaze Tablet2 Development Platform BSP. For more information about hardware and software limitations for this platform, see the release notes that came with the development kit.
Hardware component |
Specifications |
BSP Support |
|---|---|---|
Core Logic |
||
OMAP4470 |
1.5GHz OMAP4470 applications processor |
Yes |
TWL6040 |
TWL6041 audio IC |
Yes |
TWL6032 |
TWL6032 power management integrated circuit (IC) with TPS62361 SMPS (switch-mode power supply) |
Yes |
Memory |
||
EMMC |
32-GB eMMC v4.41 Flash memory |
Yes |
LPDDR |
1 GB low-power, dual-channel, double data rate memory |
Yes |
Display/Video |
||
LCD Display |
10.1" WXGA (1280 x 800) LCD with Capacitive touchscreen |
Yes |
HDMI |
HDMI v1.3 output (supports full 1080p resolution) |
|
Video Jack |
Audio in-out/video jack (3.5-mm connector) |
|
Display Port |
One standard v1.1a DisplayPort connector |
|
User Interface |
||
Touch Screen |
|
Yes |
Buttons |
|
Yes |
Switches |
|
|
Vibration motors |
Two unbalanced mass vibration motors |
|
Serial Interface |
||
USB OTG |
One High-Speed USB On-The-Go (HS USB 2.0 OTG) port .gif "Dn167241.note(en-us,WinEmbedded.80).gif") Important:
If you connect a USB hub to this port, the hub must have an external power supply.
|
Yes |
USB 2.0 |
Two High-Speed USB 2.0 host ports |
No |
Removable Media |
||
SD/MMC |
|
Yes |
SIM Card |
One SIM card connector for modem support |
|
Audio |
||
Audio Jack |
One 3.5 mm stereo headset jack for audio output and MIC input |
Yes |
Digital Microphone |
Four digital microphone inputs |
|
Speakers |
Two 1W RMS speakers |
Yes |
FM Radio Support |
FM transmit/receive |
|
Expansion |
||
COM |
One COM connector for connectivity modules |
|
miniPCIe |
One full miniPCIe connector for optional modem modules |
|
Wireless Connectivity |
||
Wi-Fi |
WLAN (802.11a/b/g/n) |
Yes |
Wireless Chipset |
Single-chip WiLink 7.0 combination solution |
Yes |
Bluetooth |
Bluetooth wireless technology |
|
GPS |
GPS Support |
|
Modem |
||
Wide Area Network |
Industry-standard mini-PCIe modem connector capable of supporting LTE or 3G modems with integrated multi-band primary and diversity UMTS antennas |
|
Sensors |
||
Accelerometer |
3-axis accelerometer sensor |
|
Pressure |
Pressure (barometric) sensor |
|
Compass |
Digital compass sensor |
|
Ambient Light |
Ambient light sensor |
|
Temperature |
Temperature sensor |
|
Proximity |
Proximity sensor |
|
Camera |
||
External Camera Port |
5MP, 8MP and 12MP camera modules kits are available as accessories. Grooved frame to allow for external camera module(s) attachment. |
Yes |
Debug |
||
RJ-45 |
One 802.3 (wired) Ethernet port (RJ-45 connector) |
Yes |
MIPI Debug |
One MIPI test and debug connector (accessible only by removing the back cover) |
|
Debug UART |
One USB connector, which has serial UART data |
Yes |
Power |
||
Wall Power |
One standard 5V input for wall power |
Yes |
USB Power |
Support for USB power |
Yes |
Battery |
4100 mAh single-cell Lithium-Ion battery |
Yes |
Note
There is a difference between TI/ARM and x86 systems during start-up. On TI/ARM processors the FTP server is loaded during boot-up, however, on x86 the FTP server is not. On the TI_3730 and TI_4470 the FTP server can be started directly by ftp://<ipaddress>. On x86 targets, the user must fire an IOCTL to start the FTP server.