Compartilhar via

GameInputBatteryState

  • Artigo

Describes the battery state of an input device.

Syntax

typedef struct GameInputBatteryState {  
    float chargeRate;  
    float maxChargeRate;  
    float remainingCapacity;  
    float fullChargeCapacity;  
    GameInputBatteryStatus status;  
} GameInputBatteryState

Members

chargeRate
Type: float

Watt hour value of charge rate of device. If the device does not provide an estimate the chargeRate is set to +/- 10% of the fullChargeCapacity, or zero if the charging state is "idle".

maxChargeRate
Type: float

Watt hour value of the maximum rate at which the battery may be charged without damage.

remainingCapacity
Type: float

Watt hour value of the remaining charge in the input device battery. If the device does not provide an estimate, remainingCapacity is set to the value of fullChargeCapacity, multiplied by the remaining charge percentage.

fullChargeCapacity
Type: float

Watt hour value of the full capacity of the input device batter. If the device does not provide an estimate, the fullChargeCapacity is set to 1 watt hour.

status
Type: GameInputBatteryStatus

The state of the battery on an input device.

Remarks

All floating-point values are expressed in terms of watt hours. If the device does not have a battery, or if the current battery state cannot be determined, all floating-point values are zero. Otherwise, all floating-point values are positive numbers, with the exception of the chargeRate member which is a negative value when the battery is discharging.

Accurate watt hour values are provided whenever they can be retrieved from the device. However, not all devices provide this information, or may only provide it for some of the values. Any floating-point values that don't have accurate watt hour readings available are assigned default values as follows:

  • chargeRate is set to +/- 10% of the fullChargeCapacity value when charging/discharging, or zero if the charging state is "idle"
  • remainingCapacity is set to the value of fullChargeCapacity, multiplied by the remaining charge percentage
  • fullChargeCapacity is set to a value of 1 watt hour

Many game controllers have low-cost battery charging circuits that can only report granular charge levels, rather than a continuous charge percentage. In that case, the granular values are mapped to charge percentages per the following table:

Granular Charge Level Mapped Percentage Value
Full 100%
Medium 70%
Low 40%
Critical 10%

Any UI code that displays "bars" of battery power should align with the values in this table when displaying battery levels, for the best user experience.

If the IGameInputDevice::GetBatteryState method is called when the device has been disconnected from the system, all floating-point values are set to zero and the status member is set to GameInputBatteryUnknown (even if valid values were available when the device was connected). This method simply retrieves data stored in local memory, and is safe to call from any context.

Requirements

Header: GameInput.h

Supported platforms: Windows, Xbox One family consoles and Xbox Series consoles

See also

Input API Overview
GameInput
IGameInputDevice::GetBatteryState