다음을 통해 공유

GenericTypeParameterBuilder.MakeArrayType 메서드

  • 참조

정의

네임스페이스:
System.Reflection.Emit
어셈블리:
System.Reflection.Emit.dll
어셈블리:
mscorlib.dll
어셈블리:
netstandard.dll
패키지:
System.Reflection.Emit v4.7.0

요소 형식이 제네릭 형식 매개 변수인 배열의 형식을 반환합니다.

오버로드

MakeArrayType(Int32)

지정된 차원 수를 가지며 요소 형식이 제네릭 형식 매개 변수인 배열의 형식을 반환합니다.
MakeArrayType()

요소 형식이 제네릭 형식 매개 변수인 1차원 배열의 형식을 반환합니다.

MakeArrayType(Int32)

Source:
GenericTypeParameterBuilder.cs

지정된 차원 수를 가지며 요소 형식이 제네릭 형식 매개 변수인 배열의 형식을 반환합니다.

public:
 override Type ^ MakeArrayType(int rank);
public override Type MakeArrayType (int rank);
override this.MakeArrayType : int -> Type
Public Overrides Function MakeArrayType (rank As Integer) As Type

매개 변수

rank
Int32

배열의 차수입니다.

반환

Type

지정된 차원 수를 가지며 요소 형식이 제네릭 형식 매개 변수인 배열의 형식을 나타내는 Type 개체입니다.

예외

IndexOutOfRangeException

rank 가 유효한 차원 수가 아닙니다. 예를 들어, 값이 1보다 작은 경우

예제

다음 코드 예제에서는 동적 모듈, 라는 추상 제네릭 형식 Sample , 하나의 형식 매개 변수, T및 라는 TestMethod추상 메서드를 만듭니다. TestMethod는 형식의 ref 매개 변수(ByRefVisual Basic의 경우) , 형식TT에 대한 포인터 및 배열T을 사용합니다. 이 메서드는 의 2차원 배열을 반환합니다 T. 코드 예제에서는 동적 모듈을 디스크에 저장하므로 MSIL 디스어셈블러(Ildasm.exe)를 사용하여 검사할 수 있습니다.

using namespace System;
using namespace System::Reflection;
using namespace System::Reflection::Emit;

int main()
{
    // Define a dynamic assembly to contain the sample type. The
    // assembly will not be run, but only saved to disk, so
    // AssemblyBuilderAccess.Save is specified.
    //
    AppDomain^ appDomain = AppDomain::CurrentDomain;
    AssemblyName^ assemblyName = gcnew
        AssemblyName("MakeXxxGenericTypeParameterExample");
    AssemblyBuilder^ assemblyBuilder = appDomain->DefineDynamicAssembly
        (assemblyName, AssemblyBuilderAccess::Save);

    // An assembly is made up of executable modules. For a single
    // module assembly, the module name and file name are the
    // same as the assembly name.
    ModuleBuilder^ moduleBuilder = assemblyBuilder->DefineDynamicModule
        (assemblyName->Name, assemblyName->Name + ".dll");

    // Define the sample type.
    TypeBuilder^ typeBuilder = moduleBuilder->DefineType("Sample",
        TypeAttributes::Public | TypeAttributes::Abstract);

    // Make the sample type a generic type, by defining a type
    // parameter T. All type parameters are defined at the same
    // time, by passing an array containing the type parameter
    // names. 
    array<String^>^ typeParamNames = {"T"};
    array<GenericTypeParameterBuilder^>^ typeParams =
        typeBuilder->DefineGenericParameters(typeParamNames);

    // Define a method that takes a ByRef argument of type T, a
    // pointer to type T, and one-dimensional array of type T.
    // The method returns a two-dimensional array of type T.
    //
    // To create this method, you need Type objects that repre-
    // sent the parameter types and the return type. Use the
    // MakeByRefType, MakePointerType, and MakeArrayType methods
    // to create the Type objects, using the generic type para-
    // meter T.
    //
    Type^ byRefType = typeParams[0]->MakeByRefType();
    Type^ pointerType = typeParams[0]->MakePointerType();
    Type^ arrayType = typeParams[0]->MakeArrayType();
    Type^ twoDimArrayType = typeParams[0]->MakeArrayType(2);

    // Create the array of parameter types.
    array<Type^>^ parameterTypes = {byRefType, pointerType, arrayType};

    // Define the abstract Test method. After you have compiled
    // and run this example code, you can use ildasm.exe to open
    // MakeXxxGenericTypeParameterExample.dll, examine the Sample
    // type, and verify the parameter types and return type of
    // the TestMethod method.
    //
    MethodBuilder^ methodBuilder = typeBuilder->DefineMethod("TestMethod",
        MethodAttributes::Abstract | MethodAttributes::Virtual 
        | MethodAttributes::Public, twoDimArrayType, parameterTypes);

    // Create the type and save the assembly. For a single-file 
    // assembly, there is only one module to store the manifest 
    // information in.
    //
    typeBuilder->CreateType();
    assemblyBuilder->Save(assemblyName->Name + ".dll");
};

using System;
using System.Reflection;
using System.Reflection.Emit;
using Microsoft.VisualBasic;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new
            AssemblyName("MakeXxxGenericTypeParameterExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName, AssemblyBuilderAccess.Save);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same
        // as the assembly name.
        //
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name, myAsmName.Name + ".dll");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType("Sample",
            TypeAttributes.Public | TypeAttributes.Abstract);

        // Make the sample type a generic type, by defining a type
        // parameter T. All type parameters are defined at the same
        // time, by passing an array containing the type parameter
        // names.
        string[] typeParamNames = {"T"};
        GenericTypeParameterBuilder[] typeParams =
            myType.DefineGenericParameters(typeParamNames);

        // Define a method that takes a ByRef argument of type T, a
        // pointer to type T, and one-dimensional array of type T. The
        // method returns a two-dimensional array of type T.
        //
        // To create this method, you need Type objects that represent the
        // parameter types and the return type. Use the MakeByRefType,
        // MakePointerType, and MakeArrayType methods to create the Type
        // objects, using the generic type parameter T.
        //
        Type byRefType = typeParams[0].MakeByRefType();
        Type pointerType = typeParams[0].MakePointerType();
        Type arrayType = typeParams[0].MakeArrayType();
        Type twoDimArrayType = typeParams[0].MakeArrayType(2);

        // Create the array of parameter types.
        Type[] parameterTypes = {byRefType, pointerType, arrayType};

        // Define the abstract Test method. After you have compiled
        // and run this example code, you can use ildasm.exe to open
        // MakeXxxGenericTypeParameterExample.dll, examine the Sample
        // type, and verify the parameter types and return type of
        // the TestMethod method.
        //
        MethodBuilder myMethodBuilder = myType.DefineMethod(
            "TestMethod",
            MethodAttributes.Abstract | MethodAttributes.Virtual
            | MethodAttributes.Public,
            twoDimArrayType,
            parameterTypes);

        // Create the type and save the assembly. For a single-file
        // assembly, there is only one module to store the manifest
        // information in.
        //
        myType.CreateType();
        myAssembly.Save(myAsmName.Name + ".dll");
    }
}

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("MakeXxxGenericTypeParameterExample")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.Save)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public Or TypeAttributes.Abstract)

        ' Make the sample type a generic type, by defining a type
        ' parameter T. All type parameters are defined at the same
        ' time, by passing an array containing the type parameter
        ' names. 
        Dim typeParamNames() As String = {"T"}
        Dim typeParams() As GenericTypeParameterBuilder = _
            myType.DefineGenericParameters(typeParamNames)

        ' Define a method that takes a ByRef argument of type T, a
        ' pointer to type T, and one-dimensional array of type T. The
        ' method returns a two-dimensional array of type T.
        '
        ' To create this method, you need Type objects that represent the
        ' parameter types and the return type. Use the MakeByRefType, 
        ' MakePointerType, and MakeArrayType methods to create the Type
        ' objects, using the generic type parameter T.
        '
        Dim byRefType As Type = typeParams(0).MakeByRefType
        Dim pointerType As Type = typeParams(0).MakePointerType
        Dim arrayType As Type = typeParams(0).MakeArrayType
        Dim twoDimArrayType As Type = typeParams(0).MakeArrayType(2)

        ' Create the array of parameter types.
        Dim parameterTypes() As Type = _
            {byRefType, pointerType, arrayType}

        ' Define the abstract Test method. After you have compiled
        ' and run this example code, you can use ildasm.exe to open
        ' MakeXxxGenericTypeParameterExample.dll, examine the Sample
        ' type, and verify the parameter types and return type of
        ' the TestMethod method.
        '
        Dim myMethodBuilder As MethodBuilder = myType.DefineMethod( _
            "TestMethod", _
            MethodAttributes.Abstract Or MethodAttributes.Virtual _
                Or MethodAttributes.Public, _
            twoDimArrayType, _
            parameterTypes)

        ' Create the type and save the assembly. For a single-file 
        ' assembly, there is only one module to store the manifest 
        ' information in.
        '
        myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

    End Sub
End Class

설명

메서드는 MakeArrayType 매개 변수 목록에 대한 배열 형식을 생성하는 방법을 제공합니다.

추가 정보

적용 대상

MakeArrayType()

Source:
GenericTypeParameterBuilder.cs

요소 형식이 제네릭 형식 매개 변수인 1차원 배열의 형식을 반환합니다.

public:
 override Type ^ MakeArrayType();
public override Type MakeArrayType ();
override this.MakeArrayType : unit -> Type
Public Overrides Function MakeArrayType () As Type

반환

Type

요소 형식이 제네릭 형식 매개 변수인 1차원 배열의 형식을 나타내는 Type 개체입니다.

예제

다음 코드 예제에서는 동적 모듈, 라는 추상 제네릭 형식 Sample , 하나의 형식 매개 변수, T및 라는 TestMethod추상 메서드를 만듭니다. TestMethod는 형식의 ref 매개 변수(ByRefVisual Basic의 경우) , 형식TT에 대한 포인터 및 배열T을 사용합니다. 이 메서드는 의 2차원 배열을 반환합니다 T. 코드 예제에서는 동적 모듈을 디스크에 저장하므로 MSIL 디스어셈블러(Ildasm.exe)를 사용하여 검사할 수 있습니다.

using namespace System;
using namespace System::Reflection;
using namespace System::Reflection::Emit;

int main()
{
    // Define a dynamic assembly to contain the sample type. The
    // assembly will not be run, but only saved to disk, so
    // AssemblyBuilderAccess.Save is specified.
    //
    AppDomain^ appDomain = AppDomain::CurrentDomain;
    AssemblyName^ assemblyName = gcnew
        AssemblyName("MakeXxxGenericTypeParameterExample");
    AssemblyBuilder^ assemblyBuilder = appDomain->DefineDynamicAssembly
        (assemblyName, AssemblyBuilderAccess::Save);

    // An assembly is made up of executable modules. For a single
    // module assembly, the module name and file name are the
    // same as the assembly name.
    ModuleBuilder^ moduleBuilder = assemblyBuilder->DefineDynamicModule
        (assemblyName->Name, assemblyName->Name + ".dll");

    // Define the sample type.
    TypeBuilder^ typeBuilder = moduleBuilder->DefineType("Sample",
        TypeAttributes::Public | TypeAttributes::Abstract);

    // Make the sample type a generic type, by defining a type
    // parameter T. All type parameters are defined at the same
    // time, by passing an array containing the type parameter
    // names. 
    array<String^>^ typeParamNames = {"T"};
    array<GenericTypeParameterBuilder^>^ typeParams =
        typeBuilder->DefineGenericParameters(typeParamNames);

    // Define a method that takes a ByRef argument of type T, a
    // pointer to type T, and one-dimensional array of type T.
    // The method returns a two-dimensional array of type T.
    //
    // To create this method, you need Type objects that repre-
    // sent the parameter types and the return type. Use the
    // MakeByRefType, MakePointerType, and MakeArrayType methods
    // to create the Type objects, using the generic type para-
    // meter T.
    //
    Type^ byRefType = typeParams[0]->MakeByRefType();
    Type^ pointerType = typeParams[0]->MakePointerType();
    Type^ arrayType = typeParams[0]->MakeArrayType();
    Type^ twoDimArrayType = typeParams[0]->MakeArrayType(2);

    // Create the array of parameter types.
    array<Type^>^ parameterTypes = {byRefType, pointerType, arrayType};

    // Define the abstract Test method. After you have compiled
    // and run this example code, you can use ildasm.exe to open
    // MakeXxxGenericTypeParameterExample.dll, examine the Sample
    // type, and verify the parameter types and return type of
    // the TestMethod method.
    //
    MethodBuilder^ methodBuilder = typeBuilder->DefineMethod("TestMethod",
        MethodAttributes::Abstract | MethodAttributes::Virtual 
        | MethodAttributes::Public, twoDimArrayType, parameterTypes);

    // Create the type and save the assembly. For a single-file 
    // assembly, there is only one module to store the manifest 
    // information in.
    //
    typeBuilder->CreateType();
    assemblyBuilder->Save(assemblyName->Name + ".dll");
};

using System;
using System.Reflection;
using System.Reflection.Emit;
using Microsoft.VisualBasic;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new
            AssemblyName("MakeXxxGenericTypeParameterExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName, AssemblyBuilderAccess.Save);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same
        // as the assembly name.
        //
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name, myAsmName.Name + ".dll");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType("Sample",
            TypeAttributes.Public | TypeAttributes.Abstract);

        // Make the sample type a generic type, by defining a type
        // parameter T. All type parameters are defined at the same
        // time, by passing an array containing the type parameter
        // names.
        string[] typeParamNames = {"T"};
        GenericTypeParameterBuilder[] typeParams =
            myType.DefineGenericParameters(typeParamNames);

        // Define a method that takes a ByRef argument of type T, a
        // pointer to type T, and one-dimensional array of type T. The
        // method returns a two-dimensional array of type T.
        //
        // To create this method, you need Type objects that represent the
        // parameter types and the return type. Use the MakeByRefType,
        // MakePointerType, and MakeArrayType methods to create the Type
        // objects, using the generic type parameter T.
        //
        Type byRefType = typeParams[0].MakeByRefType();
        Type pointerType = typeParams[0].MakePointerType();
        Type arrayType = typeParams[0].MakeArrayType();
        Type twoDimArrayType = typeParams[0].MakeArrayType(2);

        // Create the array of parameter types.
        Type[] parameterTypes = {byRefType, pointerType, arrayType};

        // Define the abstract Test method. After you have compiled
        // and run this example code, you can use ildasm.exe to open
        // MakeXxxGenericTypeParameterExample.dll, examine the Sample
        // type, and verify the parameter types and return type of
        // the TestMethod method.
        //
        MethodBuilder myMethodBuilder = myType.DefineMethod(
            "TestMethod",
            MethodAttributes.Abstract | MethodAttributes.Virtual
            | MethodAttributes.Public,
            twoDimArrayType,
            parameterTypes);

        // Create the type and save the assembly. For a single-file
        // assembly, there is only one module to store the manifest
        // information in.
        //
        myType.CreateType();
        myAssembly.Save(myAsmName.Name + ".dll");
    }
}

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("MakeXxxGenericTypeParameterExample")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.Save)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public Or TypeAttributes.Abstract)

        ' Make the sample type a generic type, by defining a type
        ' parameter T. All type parameters are defined at the same
        ' time, by passing an array containing the type parameter
        ' names. 
        Dim typeParamNames() As String = {"T"}
        Dim typeParams() As GenericTypeParameterBuilder = _
            myType.DefineGenericParameters(typeParamNames)

        ' Define a method that takes a ByRef argument of type T, a
        ' pointer to type T, and one-dimensional array of type T. The
        ' method returns a two-dimensional array of type T.
        '
        ' To create this method, you need Type objects that represent the
        ' parameter types and the return type. Use the MakeByRefType, 
        ' MakePointerType, and MakeArrayType methods to create the Type
        ' objects, using the generic type parameter T.
        '
        Dim byRefType As Type = typeParams(0).MakeByRefType
        Dim pointerType As Type = typeParams(0).MakePointerType
        Dim arrayType As Type = typeParams(0).MakeArrayType
        Dim twoDimArrayType As Type = typeParams(0).MakeArrayType(2)

        ' Create the array of parameter types.
        Dim parameterTypes() As Type = _
            {byRefType, pointerType, arrayType}

        ' Define the abstract Test method. After you have compiled
        ' and run this example code, you can use ildasm.exe to open
        ' MakeXxxGenericTypeParameterExample.dll, examine the Sample
        ' type, and verify the parameter types and return type of
        ' the TestMethod method.
        '
        Dim myMethodBuilder As MethodBuilder = myType.DefineMethod( _
            "TestMethod", _
            MethodAttributes.Abstract Or MethodAttributes.Virtual _
                Or MethodAttributes.Public, _
            twoDimArrayType, _
            parameterTypes)

        ' Create the type and save the assembly. For a single-file 
        ' assembly, there is only one module to store the manifest 
        ' information in.
        '
        myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

    End Sub
End Class

설명

메서드는 MakeArrayType 매개 변수 목록에 대한 배열 형식을 생성하는 방법을 제공합니다.

추가 정보

적용 대상