SNTP Registry Settings (Compact 2013)
3/26/2014
The SNTP registry settings are located under the HKEY_LOCAL_MACHINE\Services\Timesvc registry key. Upon system startup, servicesd.exe uses the information located under this key to initialize the SNTP service.
After you have modified the registry settings for your SNTP service, it is not necessary that you reboot your device for the changes to take effect. To implement the changes in the registry without rebooting the device, you must pass in the IOCTL_SERVICE_REFRESH IOCTL to the xxx_IOControl (Servicesd.exe) function.
The following table shows the named values for the HKEY_LOCAL_MACHINE\Services\Timesvc registry key.
Value : type |
Description |
|---|---|
Context : REG_DWORD |
Default set to zero (0). Specifies the initial value passed into the initialization routine. .gif "Ee500860.note(en-us,WinEmbedded.80).gif") Note:
Do not modify this value.
|
Dll : REG_SZ |
Default set to "timesvc.dll". Specifies the name of the dynamic-link library (DLL) file to be loaded. Note:
Do not modify this value.
|
Order : REG_DWORD |
Default set to 99. Specifies the order in which Servicesd.exe will load the service. |
Keep : REG_DWORD |
Default set to 1. If set to zero (0), the DLL will be unloaded immediately after initialization. |
Prefix : REG_SZ |
Default set to NTP. Specifies the prefix of the DLL to be loaded. Note:
Do not modify this value.
|
Index : REG_SZ |
Default set to zero (0). Specifies the service index. Note:
Do not modify this value.
|
Server |
Specifies the domain name of the SNTP server. If the name of one server is specified, this value is type REG_SZ. If a list of servers is specified, this value is type REG_MULTI_SZ. If no name is provided, server-only operation will be assumed. Note:
For a list of available SNTP servers, visit this Microsoft Web site.
|
Refresh : REG_DWORD |
Specifies the period, in milliseconds, between synchronizations with the SNTP server. This is ignored in server-only mode. |
RecoveryRefresh : REG_DWORD |
Specifies the time, in milliseconds, until next synchronization if the previous attempt failed. This is ignored in server-only mode. Note:
The time specified for this key must be less than the time specified for the Refresh key.
|
Threshold : REG_DWORD |
Specifies the interval, in milliseconds, between the time on the SNTP server and the current time. If the difference between the SNTP server time and the local system time is larger, the update is ignored unless the system clock is presumed incorrect. This is ignored in server-only mode. |
ServerRole : REG_DWORD |
Default set to zero (0). Specifies the time server role. If this value is set to 1, a time server running on the Windows Embedded Compact powered device will be enabled. |
Trustlocalclock : REG_DWORD |
Default set to 1. If this value is set to zero (0), the system is presumed not to have Real-time Communication (RTC) capabilities. If this is the case, server multicast is disabled until the clock synchronization with the SNTP server succeeds, and queries to the server return the "unreliable clock" flag. Also, time synchronization is forced on system wake-up. If the client is disabled, the clock is presumed to be privileged and this value is ignored. |
Multicast : REG_DWORD |
Specifies the IPv4 address for multicast mode. Setting this value to 1 turns on the multicast server. |
Multicastperiod : REG_DWORD |
Specifies the interval between subsequent multicasts. |
AutoUpdate : REG_DWORD |
If 1, enables automatic time updates by SNTP client. "Server" must be specified. |
Enable automatic daylight savings switch-over
The HKEY_LOCAL_MACHINE\Software\Microsoft\Clock\AutoDST registry subkey enables the SNTP service (timesvc.dll) to perform automatic daylight savings switch-over.
Note
Timesvc.dll is not included on all devices.
Table below shows the named value for this subkey.
Value : type |
Description |
|---|---|
AutoDST : DWORD |
Default setting is 1, which enables the automatic daylight savings switch-over service. Setting of 0 disables the service. |
Ports
Both SNTP and NTP are clients of the User Datagram Protocol (UDP). The UDP port number assigned to NTP is 123.