MIPS Error Messages C2526 - C2610 (Windows Embedded CE 6.0)
1/5/2010
The following table shows MIPS error messages number 526 through 610.
| No. | Severity | Message text |
|---|---|---|
C2526 |
ERROR |
Code can only be placed in text |
C2527 |
ERROR |
Bad instruction opcode |
C2528 |
INFO |
Preparing gp-tables |
C2529 |
INFO |
Building gp-tables |
C2530 |
ERROR |
Label referenced but not defined: %s |
C2531 |
ERROR |
Not all branch-label symbols were defined |
C2532 |
ERROR |
C0 opcode must be inside .set noreorder section |
C2533 |
ERROR |
Byte address of jump target must fit in 28 bits |
C2534 |
ERROR |
Jump target is not word-aligned |
C2536 |
ERROR |
Register must differ from base |
C2537 |
ERROR |
Operand 1 should be fp reg |
C2538 |
ERROR |
ulwu instruction not implemented |
C2539 |
ERROR |
coproc doubles not implemented |
C2540 |
ERROR |
li.e instruction not implemented |
C2542 |
ERROR |
Exponent out of range: %s |
C2543 |
ERROR |
Only \\""1\\"" or \\""0\\"" allowed left of binary point: %s |
C2544 |
ERROR |
Illegally denormalized fraction: %s |
C2545 |
ERROR |
Floating point underflow: %s |
C2546 |
ERROR |
-M forbidden when assembler runs on a MIPS machine |
C2547 |
ERROR |
-M does not support \\"".extended\\"" |
C2548 |
ERROR |
-M does not support hex floating point |
C2549 |
ERROR |
Floating point literal too long |
C2550 |
ERROR |
Too many float literals — compile with \\""-Wb,-nopool\\"" |
C2551 |
ERROR |
Cannot label a pseudo-op in text section |
C2552 |
ERROR |
Shift amount not 0..31 |
C2553 |
ERROR |
Shift amount not 0..63 |
C2554 |
ERROR |
gp-relative segments together exceed 64k bytes: %d bytes |
C2558 |
ERROR |
MIPS16 move must use a MIPSII gp register |
C2559 |
ERROR |
MIPS16 addiu immediate limited to 15 bits |
C2560 |
ERROR |
Doubleword opcode not supported by mips2 or earlier |
C2575 |
ERROR |
MIPS16 load with symbolic offset must use different base & dest |
C2576 |
ERROR |
MIPS16 store may not use symbolic offset in base-offset mode |
C2577 |
ERROR |
Non-MIPS16 instruction used in MIPS16 text section |
C2578 |
ERROR |
MIPS16 instruction used in non-MIPS16 text section |
C2579 |
ERROR |
2nd register invalid in MIPS16 dsrl and dsra |
C2580 |
ERROR |
Branch offset not specified |
C2581 |
ERROR |
Relative offset not multiple of 4 |
C2582 |
ERROR |
Relative offset beyond 32768 |
C2583 |
ERROR |
cprestore offset must be positive and divisible by 4 |
C2584 |
ERROR |
.cpalias requires a register argument |
C2585 |
ERROR |
Number out of range: %s |
C2586 |
ERROR |
MIPS16 general purpose register expected |
C2587 |
ERROR |
2-register MIPS16 jalr must take $ra as first operand |
C2602 |
ERROR |
Assembler op/directive expected |
C2603 |
ERROR |
Undefined symbol in expression |
C2604 |
ERROR |
Invalid symbol in expression: %s |
C2605 |
ERROR |
Symbol must have absolute value: %s |
C2607 |
ERROR |
No such label |
C2608 |
ERROR |
Too many local labels |
C2609 |
ERROR |
Overflow |
See Also
Reference
MIPS Error Messages C2526 - C2610
MIPS Error Messages C2611- C2660
MIPS Error Messages C2661 - C2910
MIPS Error Messages C2911 - C2980
MIPS FATAL Error Messages C1001 - C1514