Muokkaa

Jaa

Azure SignalR Service monitoring data reference

  • Artikkeli

This article contains all the monitoring reference information for this service.

See Monitor Azure SignalR Service for details on the data you can collect for Azure SignalR Service and how to use it.

Metrics

This section lists all the automatically collected platform metrics for this service. These metrics are also part of the global list of all platform metrics supported in Azure Monitor.

For information on metric retention, see Azure Monitor Metrics overview.

Metrics for Azure SignalR Service are in the Errors, Saturation, or Traffic categories.

Supported metrics for Microsoft.SignalRService/SignalR

The following table lists the metrics available for the Microsoft.SignalRService/SignalR resource type.

  • All columns might not be present in every table.
  • Some columns might be beyond the viewing area of the page. Select Expand table to view all available columns.

Table headings

  • Category - The metrics group or classification.
  • Metric - The metric display name as it appears in the Azure portal.
  • Name in REST API - The metric name as referred to in the REST API.
  • Unit - Unit of measure.
  • Aggregation - The default aggregation type. Valid values: Average (Avg), Minimum (Min), Maximum (Max), Total (Sum), Count.
  • Dimensions - Dimensions available for the metric.
  • Time Grains - Intervals at which the metric is sampled. For example, PT1M indicates that the metric is sampled every minute, PT30M every 30 minutes, PT1H every hour, and so on.
  • DS Export- Whether the metric is exportable to Azure Monitor Logs via diagnostic settings. For information on exporting metrics, see Create diagnostic settings in Azure Monitor.

Category: Errors

Metric Name in REST API Unit Aggregation Dimensions Time Grains DS Export
System Errors

The percentage of system errors		 SystemErrors Percent Maximum <none> PT1M Yes
User Errors

The percentage of user errors		 UserErrors Percent Maximum <none> PT1M Yes

Category: Saturation

Metric Name in REST API Unit Aggregation Dimensions Time Grains DS Export
Server Load

SignalR server load.		 ServerLoad Percent Minimum, Maximum, Average <none> PT1M No

Category: Traffic

Metric Name in REST API Unit Aggregation Dimensions Time Grains DS Export
Connection Close Count

The count of connections closed by various reasons.		 ConnectionCloseCount Count Total (Sum) Endpoint, ConnectionCloseCategory PT1M Yes
Connection Count

The amount of user connection.		 ConnectionCount Count Maximum Endpoint PT1M Yes
Connection Open Count

The count of new connections opened.		 ConnectionOpenCount Count Total (Sum) Endpoint PT1M Yes
Connection Quota Utilization

The percentage of connection connected relative to connection quota.		 ConnectionQuotaUtilization Percent Minimum, Maximum, Average <none> PT1M Yes
Inbound Traffic

The inbound traffic of service		 InboundTraffic Bytes Total (Sum) <none> PT1M Yes
Message Count

The total amount of messages.		 MessageCount Count Total (Sum) <none> PT1M Yes
Outbound Traffic

The outbound traffic of service		 OutboundTraffic Bytes Total (Sum) <none> PT1M Yes

Supported metrics for Microsoft.SignalRService/SignalR/replicas

The following table lists the metrics available for the Microsoft.SignalRService/SignalR/replicas resource type.

  • All columns might not be present in every table.
  • Some columns might be beyond the viewing area of the page. Select Expand table to view all available columns.

Table headings

  • Category - The metrics group or classification.
  • Metric - The metric display name as it appears in the Azure portal.
  • Name in REST API - The metric name as referred to in the REST API.
  • Unit - Unit of measure.
  • Aggregation - The default aggregation type. Valid values: Average (Avg), Minimum (Min), Maximum (Max), Total (Sum), Count.
  • Dimensions - Dimensions available for the metric.
  • Time Grains - Intervals at which the metric is sampled. For example, PT1M indicates that the metric is sampled every minute, PT30M every 30 minutes, PT1H every hour, and so on.
  • DS Export- Whether the metric is exportable to Azure Monitor Logs via diagnostic settings. For information on exporting metrics, see Create diagnostic settings in Azure Monitor.

Category: Errors

Metric Name in REST API Unit Aggregation Dimensions Time Grains DS Export
System Errors

The percentage of system errors		 SystemErrors Percent Maximum <none> PT1M Yes
User Errors

The percentage of user errors		 UserErrors Percent Maximum <none> PT1M Yes

Category: Saturation

Metric Name in REST API Unit Aggregation Dimensions Time Grains DS Export
Server Load

SignalR server load.		 ServerLoad Percent Minimum, Maximum, Average <none> PT1M No

Category: Traffic

Metric Name in REST API Unit Aggregation Dimensions Time Grains DS Export
Connection Close Count

The count of connections closed by various reasons.		 ConnectionCloseCount Count Total (Sum) Endpoint, ConnectionCloseCategory PT1M Yes
Connection Count

The amount of user connection.		 ConnectionCount Count Maximum Endpoint PT1M Yes
Connection Open Count

The count of new connections opened.		 ConnectionOpenCount Count Total (Sum) Endpoint PT1M Yes
Connection Quota Utilization

The percentage of connection connected relative to connection quota.		 ConnectionQuotaUtilization Percent Minimum, Maximum, Average <none> PT1M Yes
Inbound Traffic

The inbound traffic of service		 InboundTraffic Bytes Total (Sum) <none> PT1M Yes
Message Count

The total amount of messages.		 MessageCount Count Total (Sum) <none> PT1M Yes
Outbound Traffic

The outbound traffic of service		 OutboundTraffic Bytes Total (Sum) <none> PT1M Yes

For more details about the metrics for Azure SignalR Service, see Azure SignalR Service metrics.

Note

The metrics aggregation types appear in metrics explorer in the Azure portal as Count, Avg, Min, Max, and Sum.

Count is the count of sampling data received. Count is defined as a general metrics aggregation type and can't be excluded from the list of available aggregation types. It's not generally useful for SignalR Service but can sometimes be used to check if the sampling data has been sent to metrics.

Metric dimensions

For information about what metric dimensions are, see Multi-dimensional metrics.

This service has the following dimensions associated with its metrics.

Endpoint

Describes the type of connection. Includes dimension values: Client, Server, and LiveTrace.

ConnectionCloseCategory

Gives the reason for closing the connection. Includes the following dimension values.

Value Description
Normal Connection closed normally.
Throttled With Message count/rate or connection throttling, check Connection Count and Message Count current usage and your resource limits.
PingTimeout Connection ping timeout.
NoAvailableServerConnection Client connection can't be established and doesn't pass handshake because there's no available server connection.
InvokeUpstreamFailed Upstream invoke failed.
SlowClient Too many unsent messages queued up at service side.
HandshakeError Connection terminated in the handshake phase, which could be caused by the remote party closing the WebSocket connection without completing the close handshake. HandshakeError is caused by a network issue. Check browser settings to see if the client is able to create a websocket connection.
ServerConnectionNotFound Target hub server not available. This value is by design and reconnection should be done after this drop.
ServerConnectionClosed Client connection closed because the corresponding server connection was dropped. When app server uses Azure SignalR Service SDK, in the background, it initiates server connections to the remote Azure SignalR Service. Each client connection to the service is associated with one of the server connections to route traffic between the client and app server. Once a server connection is closed, all the client connections it serves are closed with the ServerConnectionDropped message.
ServiceTransientError Internal server error.
BadRequest A bad request is caused by an invalid hub name, wrong payload, or a malformed request.
ClosedByAppServer App server asked the service to close the client.
ServiceReload Service reload is triggered when a connection is dropped due to an internal service component reload. This event doesn't indicate a malfunction and is part of normal service operation.
ServiceModeSwitched Connection closed after service mode switched, such as from Serverless mode to Default mode.
Unauthorized The connection is unauthorized.

Resource logs

This section lists the types of resource logs you can collect for this service. The section pulls from the list of all resource logs category types supported in Azure Monitor.

Supported resource logs for Microsoft.SignalRService/SignalR

Category Category display name Log table Supports basic log plan Supports ingestion-time transformation Example queries Costs to export
AllLogs Azure SignalR Service Logs. SignalRServiceDiagnosticLogs

Azure SignalR service diagnostic logs.

 No Yes Queries No

Supported resource logs for Microsoft.SignalRService/SignalR/replicas

Category Category display name Log table Supports basic log plan Supports ingestion-time transformation Example queries Costs to export
AllLogs Azure SignalR Service Logs. SignalRServiceDiagnosticLogs

Azure SignalR service diagnostic logs.

 No Yes Queries Yes

Resource Log table mapping

Field names for Log Analytics vary slightly from field names for Storage destinations.

Archive log schema for a storage account

Archive log JSON strings include the following elements:

Format

Name Description
time Log event time.
level Log event level.
resourceId Resource ID of the Azure SignalR Service.
location Location of the Azure SignalR Service.
category Category of the log event.
operationName Operation name of the event.
callerIpAddress IP address of the server/client.
properties Detailed properties related to this log event, as listed in the following table.

Properties

Name Description
type Type of the log event. Currently, ConnectivityLogs type is available, to provide information about connectivity to the Azure SignalR Service.
collection Collection of the log event. Allowed values are Connection, Authorization, or Throttling.
connectionId Identity of the connection.
transportType Transport type of the connection. Allowed values are Websockets, ServerSentEvents, or LongPolling.
connectionType Type of the connection. Allowed values are Server or Client. Server is connection from server side and Client is connection from client side.
userId Identity of the user.
message Detailed message of log event.

Archive logs schema for Log Analytics

Archive log columns include the following elements:

Name Description
TimeGenerated Log event time.
Collection Collection of the log event. Allowed values are: Connection, Authorization, and Throttling.
OperationName Operation name of the event.
Location Location of the Azure SignalR Service.
Level Log event level.
CallerIpAddress IP address of the server/client.
Message Detailed message of log event.
UserId Identity of the user.
ConnectionId Identity of the connection.
ConnectionType Type of the connection. Allowed values are: Server or Client. Server is connection from server side and Client is connection from client side.
TransportType Transport type of the connection. Allowed values are: Websockets, ServerSentEvents, or LongPolling

Azure Monitor Logs tables

This section lists the Azure Monitor Logs tables relevant to this service, which are available for query by Log Analytics using Kusto queries. The tables contain resource log data and possibly more depending on what is collected and routed to them.

SignalR

Microsoft.SignalRService/SignalR

Activity log

The linked table lists the operations that can be recorded in the activity log for this service. These operations are a subset of all the possible resource provider operations in the activity log.

For more information on the schema of activity log entries, see Activity Log schema.

Related content