LPWSPCONNECT callback function (ws2spi.h)
The LPWSPConnect function establishes a connection to a peer, exchanges connect data, and specifies needed quality of service based on the supplied flow specification.
Syntax
LPWSPCONNECT Lpwspconnect;
int Lpwspconnect(
[in] SOCKET s,
[in] const sockaddr *name,
[in] int namelen,
[in] LPWSABUF lpCallerData,
[out] LPWSABUF lpCalleeData,
[in] LPQOS lpSQOS,
[in] LPQOS lpGQOS,
[out] LPINT lpErrno
)
{...}
Parameters
[in] s
Descriptor identifying an unconnected socket.
[in] name
Name of the peer to which the socket in the sockaddr is to be connected.
[in] namelen
Length of the name, in bytes.
[in] lpCallerData
Pointer to the user data that is to be transferred to the peer during connection establishment.
[out] lpCalleeData
Pointer to a buffer into which any user data received from the peer during connection establishment can be copied.
[in] lpSQOS
Pointer to the flow specifications for socket s, one for each direction.
[in] lpGQOS
Reserved.
[out] lpErrno
Pointer to the error code.
Return value
If no error occurs, LPWSPConnect returns zero. Otherwise, it returns SOCKET_ERROR, and a specific error code is available in lpErrno.
On a blocking socket, the return value indicates success or failure of the connection attempt. If the return error code indicates the connection attempt failed (that is, WSAECONNREFUSED, WSAENETUNREACH, WSAETIMEDOUT) the Winsock SPI client can call LPWSPConnect again for the same socket.
| Error Code | Meaning |
|---|---|
| The network subsystem has failed. | |
| Local address of the socket is already in use and the socket was not marked to allow address reuse with SO_REUSEADDR. This error usually occurs at the time of bind, but could be delayed until this function if the bind was to a partially wildcard address (involving ADDR_ANY) and if a specific address needs to be committed at the time of this function. | |
| (Blocking) call was canceled through LPWSPCancelBlockingCall. | |
| Blocking Winsock call is in progress or the service provider is still processing a callback function. | |
|
Nonblocking LPWSPConnect call is in progress on the specified socket. In order to preserve backward compatibility, this error is reported as WSAEINVAL to Windows Sockets 1.1 applications that link to either Winsock.dll or Wsock32.dll. |
|
| Remote address is not a valid address (for example, ADDR_ANY). | |
| Addresses in the specified family cannot be used with this socket. | |
| An attempt to connect was rejected. | |
| The name or the namelen parameter is not a valid part of the user address space, the namelen parameter is too small, the buffer length for lpCalleeData, lpSQOS, and lpGQOS is too small, or the buffer length for lpCallerData is too large. | |
| Parameter s is a listening socket. | |
| Socket is already connected (connection-oriented sockets only). | |
| The network cannot be reached from this host at this time. | |
| No buffer space is available. The socket cannot be connected. | |
| The descriptor is not a socket. | |
| Flow specifications specified in lpSQOS cannot be satisfied. | |
| The lpCallerData augment is not supported by the service provider. | |
| An attempt to connect timed out without establishing a connection. | |
| Socket is marked as nonblocking and the connection cannot be completed immediately. It is possible to select the socket using the LPWSPSelect function while it is connecting by using the **WSPSelect** function to select it for writing. | |
| An attempt to connect datagram socket to broadcast address failed because WSPSetSockOpt SO_BROADCAST is not enabled. |
Remarks
This function is used to create a connection to the specified destination and to perform a number of other ancillary operations that occur at connect time as well. If the socket, s, is unbound, unique values are assigned to the local association by the system and the socket is marked as bound.
For connection-oriented sockets (for example, type SOCK_STREAM), an active connection is initiated to the specified host using name (an address in the namespace of the socket. For a detailed description, see LPWSPBind. When this call completes successfully, the socket is ready to send and receive data. If the address member of the name structure is all zeroes, LPWSPConnect will return the error WSAEADDRNOTAVAIL. Any attempt to reconnect an active connection will fail with the error code WSAEISCONN.
For connection-oriented, nonblocking sockets it is often not possible to complete the connection immediately. In such a case, this function returns with the error WSAEWOULDBLOCK but the operation proceeds. When the success or failure outcome becomes known, it may be reported in one of several ways depending on how the client registers for notification. If the client uses LPWSPSelect, success is reported in the writefds set and failure is reported in the exceptfds set. If the client uses LPWSPAsyncSelect or LPWSPEventSelect, the notification is announced with FD_CONNECT and the error code associated with the FD_CONNECT indicates either success or a specific reason for failure.
For a connectionless socket (for example, type SOCK_DGRAM), the operation performed by LPWSPConnect is to establish a default destination address so the socket can be used with subsequent connection-oriented send and receive operations (LPWSPSend, LPWSPRecv). Any datagrams received from an address other than the destination address specified will be discarded. If the address member of the name structure is all zeroes, the socket will be disconnected— the default remote address will be indeterminate, so LPWSPSend and LPWSPRecv calls will return the error code WSAENOTCONN. However, LPWSPSendTo and LPWSPRecvFrom can still be used. The default destination can be changed by simply calling LPWSPConnect again, even if the socket is already connected. Any datagrams queued for receipt are discarded if name is different from the previous LPWSPConnect.
For connectionless sockets, name can indicate any valid address, including a broadcast address. However, to connect to a broadcast address, a socket must have WSPSetSockOpt SO_BROADCAST enabled. Otherwise, LPWSPConnect will fail with the error code WSAEACCES.
On connectionless sockets, exchange of user-to-user data is not possible and the corresponding parameters will be silently ignored.
The Winsock SPI client is responsible for allocating any memory space pointed to directly or indirectly by any of the parameters it specifies.
The lpCallerData is a value parameter that contains any user data to be sent along with the connection request. If lpCallerData is null, no user data will be passed to the peer. The lpCalleeData is a result parameter that will reference any user data passed back from the peer as part of the connection establishment. The lpCalleeData->len initially contains the length of the buffer allocated by the Winsock SPI client and pointed to by lpCalleeData->buf. The lpCalleeData->len will be set to zero if no user data has been passed back. The lpCalleeData information will be valid when the connection operation is complete. For blocking sockets, this will be when the LPWSPConnect function returns. For nonblocking sockets, this will be after the FD_CONNECT notification has occurred. If lpCalleeData is null, no user data will be passed back. The exact format of the user data is specific to the address family the socket belongs to and/or the applications involved.
At connect time, a Winsock SPI client can use the lpSQOS parameter to override any previous QoS specification made for the socket through LPWSPIoctl with the SIO_SET_QOS opcode.
The lpSQOS specifies the flow specifications for socket s, one for each direction, followed by any additional provider-specific parameters. If either the associated transport provider in general or the specific type of socket in particular cannot honor the QoS request, an error will be returned as indicated below. The sending or receiving flow specification values will be ignored, respectively, for any unidirectional sockets. If no provider-specific parameters are supplied, the buf and len members of lpSQOS->ProviderSpecific should be set to null and zero, respectively. A null value for lpSQOS indicates that no application supplied quality of service.
Note
When connected sockets break (that is, become closed for whatever reason), they should be discarded and recreated. It is safest to assume that when things go awry for any reason on a connected socket, the Winsock SPI client must discard and recreate the needed sockets in order to return to a stable point.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 2000 Professional [desktop apps only] |
| Minimum supported server | Windows 2000 Server [desktop apps only] |
| Header | ws2spi.h |