Windows Touch Reporting Rate Test - One Contact

This test verifies that a Windows Touch device correctly reports physical contact with the device and the contact position.

Test details

   
Specifications
  • Device.Input.Digitizer.Touch.ReportRate
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows 10, client editions (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 2
Category Compatibility
Timeout (in minutes) 120
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Windows Touch Testing Prerequisites.

A high packet rate helps ensure smooth, fluid motion, and it supports the feeling that the user interface (UI) is connected to the user's finger. The input rate data and increased data throughput improves gesture recognition.

This test includes four separate reporting rate scenarios that are distinguished by single and multiple contacts and stationary contact versus motion. In each scenario, the test validates that the minimum reporting rate is maintained for each contact (and specifically not just the average reporting rate).

This test also verifies that HID reports conform to the HID protocol that is described in Windows Pointer Device Data Delivery Protocol and defined in the HID I2C v1.0 Protocol Specification.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Device.Input Testing and the Hardware Component Guidelines for Windows Digitizer Class Input Devices.

More information

Command syntax

Command option Description

Logo3.exe -config ReportingRate.json

Runs the test.

 

File list

File Location

Logo3.exe

<testbinroot>\digitizer\Win8Touch

ReportingRate.json

<testbinroot>\digitizer\Win8Touch