Share via

System - PNP (disable and enable) with IO Before and After (Reliability)

  • Article

This test performs IO and basic PNP (disable/enable) on all devices of a system.

Test details

   
Specifications
  • System.Fundamentals.Reliability.SystemReliability
  • System.Fundamentals.SystemUSB.MustIncludeSuperSpeedPort
  • System.Fundamentals.SystemUSB.USBDevicesandHostControllersWorkAfterPowerCycle
  • System.Fundamentals.SystemUSB.XHCIControllerSaveState
  • System.Fundamentals.SystemUSB.XhciSupportsRuntimePowerManagement
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 60
Category Scenario
Timeout (in minutes) 300
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

More information

Parameters

Parameter name Parameter description
DQ A WDTF SDEL query that is used to identify the target device(s) - https://go.microsoft.com/fwlink/?LinkId=232678
Wpa2PskAesSsid Required ONLY if DUT or one of its child devices is a WiFi adapter. Please provide SSID of a WPA2 AES WiFi network that the test can use to test the WiFi adapter. The default is 'kitstestssid'.
Wpa2PskPassword Required ONLY if DUT or one of its child devices is a WiFi adapter. Please provide password of the WPA2 AES WiFi network specified using the Wpa2PskAesSsid parameter. The default is 'password'.
ResumeDelay Delay time in seconds after each sleep cycle
WDTFREMOTESYSTEM Required ONLY if there is a wired NIC on the test system AND it does not have an IPv6 gateway address. If determined to be required, please provide an IPv6 address that the NIC can ping to test network I/O. Eg: fe80::78b6:810:9c12:46cd
MultiDeviceHardwareIdSdelQueryHardwareID Multi Device SDEL
MultiDeviceInstanceIdSdelWDKDeviceID Device id of DUT
DriverVerifierCustomizeConfiguration Specifies that this test may want to automatically update Driver Verifier settings
TestCycles Number of test cycles
IOPeriod IO period in minutes

 

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.