Test.GhostReporting (a5a349a3-4487-4dbe-9aa0-69e54ed8bbad)

This manual test verifies that a Windows Precision Touchpad device does not report data for locations where input does not occur.

Test details

   
Specifications
  • Device.Input.Digitizer.PrecisionTouchpad.ContactReports
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows 10, client editions (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 2
Category Compatibility
Timeout (in minutes) 120
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Mouse or other Pointing Device Testing Prerequisites.

The test presents two iterations, during which you are prompted to refrain from touching the touchpad for 60 seconds. If the system has an external power source, it should be unplugged for the second iteration.

In each case, the test validates that no contacts are registered on the touchpad as expected.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Device.Input Testing.

More information

To run the test outside of Windows Hardware Lab Kit (Windows HLK) Studio, type the following command in a command prompt window that has administrative privileges:

PTLogo.exe Test.GhostReporting.json