Share via

SecureBootUEFI

  • Article

This automated test validates whether a test computer was booted in Secure Boot mode.

Test details

   
Specifications
  • System.Server.AzureStack.Security.SecureBootUEFIOverPXE
Platforms
  • Windows Server 2016 (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 60
Category Scenario
Timeout (in minutes) 3600
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

The test computer's BIOS settings must be configured as follows:

  • Boot mode: UEFI
  • Secure Boot: Enabled

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

Error 1: UEFI is enabled, but Secure Boot is disabled

Secure Boot is not enabled in the BIOS settings, or is not supported.

Workaround: Configure the BIOS settings to enable Secure Boot.

Error 2: UEFI is disabled

The system is configured to boot in Legacy BIOS mode.

Workaround: Configure the BIOS settings to set the boot mode to UEFI.