BitLocker Tpm+PIN+ USB and Recovery Password tests

This manual test determines whether PCR [0, 2, 4, 11] are consistent across reboots. This test also tests whether PCRs change between booting with an USB and docking station plugged in, and booting without these devices

Test details

   
Specifications
  • System.Fundamentals.TrustedPlatformModule.TPMRequirements
  • System.Fundamentals.TPM20.TPM20
  • System.Fundamentals.TrustedPlatformModule.TPMEnablesFullUseThroughSystemFirmware
  • System.Fundamentals.TPM.CS.ConnectedStandby
  • System.Fundamentals.TPM.NonCS.NonConnectedStandby
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
  • Windows 10, client editions (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 15
Category Scenario
Timeout (in minutes) 900
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: WDTF System Fundamentals Testing Prerequisites.

Secure boot should be enabled if it is supported by the platform.

This test prompts you to remove USB and docking station and later prompts you to insert these devices. This test adds a TPM+PIN protector on the operating system volume. The PIN is hardcoded to six zeroes. After the protector is added, this PIN is required to boot the system. You will be prompted to take note of this before each restart.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting System Fundamentals Testing.

If this test fails, review the test log from Windows Hardware Lab Kit (Windows HLK) Studio.

  1. Make sure you can see fveapi.dll in %systemroot%\system32\.

  2. Check test output directly from command prompt when the test runs or open te.wtl in the HLK Manager.

  3. If a test script fails, check the BitLocker status:

    • Manage-bde -status [volume]
  4. Collect BitLocker event logs from event viewer at two locations:

    • Filter \Windows logs\System logs by event sources started with BitLocker

    • Applications and Services Logs\Microsoft\Windows\BitLocker-API\Management

  5. Run **tpm.msc ** to ensure that the TPM Status is ON and that ownership has been taken.

  6. Check TCG logs

    • Collect TCG log (*.txt).

    • Compare multiple copies of the TCG log and see whether PCR [0, 2, 4, 11] are consistent across reboot and hibernate.

Note

   If the BitLocker WHLK test results in a recovery event, the BitLocker recovery key is 48-zeros (0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000).