Wireless Display Verify Topology
This automated test verifies that the graphics driver can reach all valid topologies. The test installs a software device to emulate Miracast sink, starts a session, and then verifies that all valid topologies can be set.
Test details
| Specifications |
|
| Platforms |
|
| Supported Releases |
|
| Expected run time (in minutes) | 10 |
| Category | Compatibility |
| Timeout (in minutes) | 600 |
| Requires reboot | false |
| Requires special configuration | false |
| Type | automatic |
Additional documentation
Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):
Running the test
Before you run the test, complete the test setup as described in the test requirements: Graphic Adapter or Chipset Testing Prerequisites.
Troubleshooting
For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.
For troubleshooting information, see Troubleshooting Device.Graphics Testing.
The test generates an RTSP message log file: virtualsinklog.{…}.txt. The actual name of this file can be found in the test log file. For example:
Message 6/13/2013 7:39:22.724 PM RTSP log file: virtualsinklog.{3D55759A-4BB2-43C6-9AD6-9D98D6726908}.txt
The test job captures WirelessDisplay.etl and WPP.etl files. You can find these files by selecting Child Job Results in Windows Hardware Lab Kit (Windows HLK) Manager and then browsing job logs for Wireless Display Cleanup Trace.
WirelessDisplay.etl contains information about the Miracast session from start to stop. Most events are aligned with DDI calls for both the user mode driver (UMD) and kernel mode driver (KMD). IHV investigating issues might find it useful to look for errors in these DDI events. The event names should be familiar to the developer because they closely match the DDI names that are used for the wireless feature. This file can be analyzed by using Windows Performance Analyzer (WPA).
WPP.etl contains WPP traces that are captured for the display kernel events related to Miracast. These traces are highly detailed, and should provide adequate information about session failures that is sufficient to debug most issues. These files require access to symbols to decode them. Symbols for the OS should be available to IHVs. The following command line should be used to decode WPP.etl in wpp.txt is: netsh trace convert overwrite=yes tmf=..\symbols.pri\TraceFormat WPP.etl.
All test cases return PASS or FAIL. The test details are available in the test log (Te.wtl), which you can view in Windows HLK Studio.
| Error | Description/Workaround |
|---|---|
Failed to reach the starting state topology. |
Driver failed to set basic topology. |
Miracast display is no longer present after topology change. |
Driver failed to connect Miracast display. |
Failed to reach the target topology. |
Driver failed to set desired topology. |
More information
Parameters
| Parameter name | Parameter description |
|---|---|
| LLU_NetAccessOnly | LLU Name of net user |
| ConfigDisplayCommandLine | Custom Command Line for ConfigDisplay. Default: logo |
| WDKDeviceID | Device id of DUT |