Share via

Wlan Test - Enable and Disable WFD Autonomous GO - (WoW64 for Arm64) (3d2f68b9-f4ce-43d1-87ec-898b008c4f12)

  • Article

This automated test enables WifiDirect Autonomous GO, checks for the SSID being broadcast, and then disables Autonomous GO.

Test details

   
Specifications
  • Device.Network.WLAN.SupportWiFiDirect.WiFiDirect
Platforms
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 2
Category Development
Timeout (in minutes) 5
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

This test is only valid on systems with a Wireless LAN adapter. This test does the following:

  • Test will tell driver to enable Autonomous GO.

Note

  Possible Failures:

Note

  Test will fail if driver cannot return the WifiDirect capabilities.

Note

  Test will fail if driver returns ConcurrentOperationSupported as false.

Note

  Test will fail if it cannot retrieve a non-empty SSID.

Note

  Test will fail if either start or stop of Autonomous GO fails.

 

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

More information

Parameters

Parameter name Parameter description
EnableTracing Enable Tracing
queryTestDeviceID Device id of device under test