WLAN Association Tests - WPA2_PSK - Enhanced_Open
Setup
- uses a local directory for binary storage.
- uses xcopy with the /d switch to get any updated binaries from the HCK Controller
- runs parallel on all machines
- Creates configuration file for AP controller service
- Initializes AP controller service
- adds firewall rules for TAEF
Test
Cleanup
- runs in parallel on all machines
- copies logs to HCK controller
- removes firewall rules for TAEF
- Stops the AP controller service
- In the event of a failed run
- All machines are rebooted
Test details
Specifications |
|
Platforms |
|
Supported Releases |
|
Expected run time (in minutes) | 10 |
Category | Scenario |
Timeout (in minutes) | 600 |
Requires reboot | false |
Requires special configuration | true |
Type | automatic |
More Information
Parameters
Parameter Name | Parameter Description |
---|---|
TestDeviceSupports5ghz | This should be set to TRUE if the device supports 5ghz networks and FALSE if it does not |
APControllerIPAddress | Internal Parameter |
LocalDir | Internal Parameter |
AP1IPAddress | IP Address of the first AP connected to the system |
AP1Password | Root password for the first AP connected to the system |
AP2IPAddress | IP Address of the second AP connected to the system |
AP2Password | Root password for the second AP connected to the system |
ServiceAPChannelAddress | Internal Parameter |
TestDll | Internal Parameter |
Priority | Internal Parameter |
TestName | Internal Parameter |
EnableTracing | Yes or No to enable tracing |
Additional Documentation
Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s): - Device.Network additional documentation
Troubleshooting
For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.