Share via

DF - PNP Disable And Enable Device Test (Development and Integration)

  • Article

This test disables and enables the target devices.

  • Test binary: Devfund_PnPDTest.dll
  • Test method: PNPDisableAndEnableDevice

Test details

   
Specifications
  • Device.DevFund.Reliability.Discretional
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 3
Category Scenario
Timeout (in minutes) 45
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Device.Fundamentals Reliability Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information specific to the Device Fundamentals tests in the HLK and WDK, see Device.DevFund additional documentation.

More information

Parameters

Parameter name Parameter description
DQ A WDTF SDEL query that is used to identify the target device(s) - https://go.microsoft.com/fwlink/?LinkId=232678
Wpa2PskAesSsid Required ONLY if DUT or one of its child devices is a WiFi adapter. Please provide SSID of a WPA2 AES WiFi network that the test can use to test the WiFi adapter. The default is 'kitstestssid'.
Wpa2PskPassword Required ONLY if DUT or one of its child devices is a WiFi adapter. Please provide password of the WPA2 AES WiFi network specified using the Wpa2PskAesSsid parameter. The default is 'password'.
WDTFREMOTESYSTEM Required ONLY if DUT or one of its child devices is a wired NIC that doesn't have an IPv6 gateway address. If determined to be required, please provide an IPv6 address that the test NIC can ping to test network I/O. Eg: fe80::78b6:810:9c12:46cd
DriverVerifierAdditionalDrivers Additional drivers that should have Driver Verifier enabled
DriverVerifierExcludedFlags Placeholder for Driver Verifier flags that may be manually excluded for the test run
MultiDeviceHardwareIdSdelQueryHardwareID Multi Device SDEL
MultiDeviceInstanceIdSdelWDKDeviceID Device id of DUT
DriverVerifierCustomizeConfiguration Specifies that this test may want to automatically update Driver Verifier settings
TestCycles Number of cycles to run the test for.
DoSimpleIO True or False. Runs SimpleIO (if found) on test devices before and after performing PNP operations.
IOPeriod Time period in minutes to run SimpleIO (if found).
DoConcurrentIO True or False. Uses WDTF concurrent IO interface to send I/O requests to target device stacks while performing PNP operations.