Share via

Run RSC Tests

  • Article

This test validates receive-segment coalescing (RSC).

Test details

   
Specifications
  • Device.Network.LAN.RSC.RSC
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 2
Category Development
Timeout (in minutes) 120
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.

Important

   The Windows HLK User's Guide - LAN Testing Prerequisites page recommends the HLK configuration of back-to-back test connection and a separate backchannel connection to the same network together with the HLK controller. It is important that in this configuration, the DUT (device-under-test) and the support network interface, be configured for DHCP so that when they are connected back-to-back, they are auto-configured with a '169.x.x.x' IP address. If this configuration is not available, then the RSC test might not be able to determine the correct client and corresponding support IP interfaces for the DUT (device-under-test). An alternate configuration is to configure the HLK Controller to be directly reachable from the DUT network - this typically requires that the test, support and controller machines be connected to the same switch. In this configuration, all network devices, except for the controller NIC, the test NIC and the support NIC, should be disabled. Other configurations are less likely to succeed."

 

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting LAN Testing.

More information

Command syntax

Command Description

cscript [SystemDrive]\Sparta_Test\TCP\RSC.wsf -v4 2>>scripterr.txt

Runs the test.

Note

   For command-line help for this test binary, type /h.

 

File list

File Location

spartadrv*.*

<[testbinroot]>\nttest\nettest\Transports\Sparta\

netcapdrv6*.*

<[testbinroot]>\nttest\nettest\Transports\Spartamini\

drvinstall.exe

<[testbinroot]>\nttest\nettest\Transports\Sparta\

autosrvc.dll

<[testbinroot]>\nttest\nettest\Transports\Sparta\

ntlog.dll

<[testbinroot]>\nttest\commontest\ntlog\

netcapture.dll

<[testbinroot]>\nttest\nettest\Transports\Sparta\

spartacm.dll

<[testbinroot]>\nttest\nettest\Transports\Sparta\

testcore.dll

<[testbinroot]>\nttest\nettest\Transports\Sparta\

config_vista.exe

<[testbinroot]>\nttest\nettest\Transports\Sparta\

*.*

<[testbinroot]>\nttest\nettest\Transports\Sparta\scripts\common\

tcp.vbs

<[testbinroot]>\nttest\nettest\Transports\Sparta\scripts\tcp\

rsc.wsf

<[testbinroot]>\nttest\nettest\Transports\Sparta\scripts\tcp\

 

Parameters

Parameter name Parameter description
InstallDir