Camera Driver Controls System Test - ROI - Exposure and Whitebalance Photo Capture

These set of tests validate cameras functionality if the driver supports KSPROPERTY_CAMERACONTROL_EXTENDED_*. If the driver does not support KSPROPERTY_CAMERACONTROL_EXTENDED_*, skip this test. This is an optional control.

If a driver does not support a control, do not implement a control handler. If a control handler is implemented, the registered test will expect the control to be fully functional.

If a driver implements a control handler, the following checks run (based on the definition of the controls):

  • The test verifies default values and validates that the appropriate property is advertised on the correct pin or filter level.

  • The test enumerates possible control values during the times that pins are streaming and not streaming.

  • Scenario tests are run on the control to determine the end-to-end functionality.

Note

   Implementation of extended controls, such as photo mode, require that you implement additional extended controls.

 

Test details

   
Specifications
  • System.Client.Camera.Base.CameraControls
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 15
Category Scenario
Timeout (in minutes) 25
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites and Webcam Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting System Client Testing and Troubleshooting Device.Streaming Testing.

More information

Parameters

Parameter name Parameter description
DriverVerifierExcludedFlags Driver Verifier flags that may be manually excluded for the test run