Set-DAEntryPointTableItem
Modifies the configuration of a DirectAccess entry point stored in a Group Policy object.
Syntax
Set-DAEntryPointTableItem
[-EntryPointName <String[]>]
-PolicyStore <String>
[-ADSite <String>]
[-EntryPointRange <String[]>]
[-TeredoServerIP <String>]
[-EntryPointIPAddress <String>]
[-GslbIP <String>]
[-IPHttpsProfile <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-DAEntryPointTableItem
[-EntryPointName <String[]>]
-GPOSession <String>
[-ADSite <String>]
[-EntryPointRange <String[]>]
[-TeredoServerIP <String>]
[-EntryPointIPAddress <String>]
[-GslbIP <String>]
[-IPHttpsProfile <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-DAEntryPointTableItem
-InputObject <CimInstance[]>
[-ADSite <String>]
[-EntryPointRange <String[]>]
[-TeredoServerIP <String>]
[-EntryPointIPAddress <String>]
[-GslbIP <String>]
[-IPHttpsProfile <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-DAEntryPointTableItem cmdlet modifies an entry point configuration that is stored in a Group Policy object (GPO). You must specify the name of the GPO in which the DirectAccess entry point configuration is stored.
Examples
Example 1: Modify an entry point
PS C:\> Set-DAEntryTableItem -EntryPointName "Paris" -GslbIP "131.107.0.1" -PolicyStore "Contoso\GPO1"This cmdlet modifies the GSLB of the entry point named Paris.
Example 2: Modify an entry point using an input object
PS C:\> $x = Set-DAEntryTableItem -EntryPointName "Paris" -PolicyStore "Contoso\GPO1"
PS C:\> $x.GslbIP = 131.107.0.1
PS C:\> $x | Set-DAEntryTableItemThis cmdlet modifies an entry point named Paris by passing an input object on the pipeline.
Parameters
-ADSite
Specifies the Active Directory Domain Services (AD DS) site name associated with the entry point. When a client computer connects to an entry point, the computer becomes associated with the AD DS site specified.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EntryPointIPAddress
Specifies the IPv6 address of the entry point to use for connectivity. The cmdlet fails if the IP address specified is not within the IP address range specified by EntryPointRange.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EntryPointName
Specifies the name of the entry point to modify. The entry point name is usually the friendly name of the location, such as Redmond or Paris.
Specify the name of the entry point by using double quotes (" ").
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EntryPointRange
Specifies the IPv6 address range associated with computers connecting through this entry point. Specify the IPv6 range in classless inter-domain routing (CIDR) notation.
The following is an example of an EntryPointRange entry:
{2001:4898:e0:305d::100:1/128, 2001:4898:e0:305d::100:2/128, 2001:4898:e0:3084::/64}
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-GPOSession
Specifies the Group Policy session to send configuration information. You can use GPOSession with the NetGPO cmdlets to aggregate multiple operations performed on a Group Policy Object.
GPOSession cannot be used in conjunction with PolicyStore.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-GslbIP
Specifies the IP address associated with the new entry point, if using DirectAccess in conjunction with global server load balancing (GSLB) site balancing.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPHttpsProfile
Specifies the IPHTTPs profile name to be used for connectivity. You specify the name of the profile in double quotes (" "). New-DAEntryPointTableItem fails if the profile does not already exist in the GPO that contains the configuration. For more information about IPHTTPs profiles, see the NetIPHTTPsConfiguration cmdlets in the NetworkTransition module.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
Sends items from an interactive window down the pipeline as input to other cmdlets. By default, this cmdlet does not generate any output. However, to send items from the interactive window down the pipeline, click to select the items and then click OK. Shift-click and Ctrl-click are supported.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PolicyStore
Specifies the policy store into which the cmdlet adds the entry point.
To add the entry point to a Group Policy Object, specify the GPO name using the format: "Domain\GPOName".
To add the entry point information to a computer's local GPO, specify the computer's local GPO name in the format "GPO:<computername>".
PolicyStore cannot be used in conjunction with GPOSession.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-TeredoServerIP
Specifies the IP address of the Teredo server for the new entry point.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
This cmdlet returns a CIM object which contains the DA entry point table item.
Outputs
None