Reset-DAEntryPointTableItem
Resets the specified DirectAccess entry point configuration to the default configuration.
Syntax
Reset-DAEntryPointTableItem
[-EntryPointName <String[]>]
-PolicyStore <String>
[-TeredoServerIP]
[-IPHttpsProfile]
[-GslbIP]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Reset-DAEntryPointTableItem
[-EntryPointName <String[]>]
-GPOSession <String>
[-TeredoServerIP]
[-IPHttpsProfile]
[-GslbIP]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Reset-DAEntryPointTableItem
-InputObject <CimInstance[]>
[-TeredoServerIP]
[-IPHttpsProfile]
[-GslbIP]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Reset-DAEntryPointTableItem cmdlet resets the configuration of the entry point specified by EntryPointName to the default configuration. You can use the optional parameters to reset specific configuration settings to the default configuration.
Examples
Example 1: Reset an entry point property
PS C:\> Reset-DAEntryPointTableItem -GslbIP -EntryPointName "Paris" -PolicyStore "Contoso\GPO1"This cmdlet resets the GslbIP property to not-configured for the Paris entry point.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EntryPointName
Specifies the name of the entry point to modify. The entry point name is usually the friendly name of the location, such as Redmond or Paris.
Specify the name of the entry point by using double quotes (" ").
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-GPOSession
Specifies the Group Policy session to send configuration information. You can use GPOSession with the NetGPO cmdlets to aggregate multiple operations performed on a Group Policy Object.
GPOSession cannot be used in conjunction with PolicyStore.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-GslbIP
Resets the global server load balancing (GSLB) IP of the specified sites to a non-configured state.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPHttpsProfile
Resets the IpHTTPsProfile property of the specified sites to a non-configured state. For more information about IPHTTPs profiles, see the NetIPHTTPsConfiguration cmdlets in the NetworkTransition module.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
Sends items from an interactive window down the pipeline as input to other cmdlets. By default, this cmdlet does not generate any output. However, to send items from the interactive window down the pipeline, click to select the items and then click OK. Shift-click and Ctrl-click are supported.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PolicyStore
Specifies the policy store into which the cmdlet adds the entry point.
To add the entry point to a Group Policy Object, specify the GPO name using the format "Domain\GPOName".
To add the entry point information to a computer's local GPO, specify the computer's local GPO name in the format "GPO:<computername>"
PolicyStore cannot be used in conjunction with GPOSession.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-TeredoServerIP
Resets the TeredoServerIP property of the specified sites to a non-configured state.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
This cmdlet accepts as input a CIM object which contains a DA site table entry.
Outputs
None