Κοινή χρήση μέσω

az networkfabric controller

  • Reference

Note

This reference is part of the managednetworkfabric extension for the Azure CLI (version 2.61.0 or higher). The extension will automatically install the first time you run an az networkfabric controller command. Learn more about extensions.

Manage Network Fabric Controller Resource.

Commands

Name Description Type Status
az networkfabric controller create

Create a Network Fabric Controller resource.

 Extension GA
az networkfabric controller delete

Delete the Network Fabric Controller resource.

 Extension GA
az networkfabric controller list

List all Network Fabric Controllers in the provided resource group or subscription.

 Extension GA
az networkfabric controller show

Show details of the provided Network Fabric Controller resource.

 Extension GA
az networkfabric controller update

Update the Network Fabric Controller resource.

 Extension GA
az networkfabric controller wait

Place the CLI in a waiting state until a condition is met.

 Extension GA

az networkfabric controller create

Create a Network Fabric Controller resource.

az networkfabric controller create --resource-group
                                   --resource-name
                                   [--annotation]
                                   [--infra-er-connections]
                                   [--ipv4-address-space]
                                   [--ipv6-address-space]
                                   [--is-workload-management-network-enabled {False, True}]
                                   [--location]
                                   [--managed-resource-group-configuration]
                                   [--nfc-sku {Basic, HighPerformance, Standard}]
                                   [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                   [--tags]
                                   [--workload-er-connections]

Examples

Create a Network Fabric Controller. For RE-PUT with 'mrg' parameter, both name and location properties are required.

az networkfabric controller create --resource-group "example-rg" --location "westus3"  --resource-name "example-nfc" --ipv4-address-space "10.0.0.0/19" --is-workload-management-network-enabled "True" --nfc-sku "Basic" --infra-er-connections "[{expressRouteCircuitId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/Microsoft.Network/expressRouteCircuits/example-expressRouteCircuit',expressRouteAuthorizationKey:'auth-key'},{expressRouteCircuitId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/Microsoft.Network/expressRouteCircuits/example-expressRouteCircuit',expressRouteAuthorizationKey:'auth-key'}]" --workload-er-connections "[{expressRouteCircuitId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/Microsoft.Network/expressRouteCircuits/example-expressRouteCircuit',expressRouteAuthorizationKey:'auth-key'},{expressRouteCircuitId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/Microsoft.Network/expressRouteCircuits/example-expressRouteCircuit',expressRouteAuthorizationKey:'auth-key'}]" --mrg name=example-mrgName location=eastus

Help text for sub parameters under the specific parent can be viewed by using the shorthand syntax '??'. See https://github.com/Azure/azure-cli/tree/dev/doc/shorthand_syntax.md for more about shorthand syntax.

az networkfabric controller create --infra-er-connections "??"

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the Network Fabric Controller.

Optional Parameters

--annotation

Description for underlying resource.

--infra-er-connections

Infra ER connections to manage infra resources. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--ipv4-address-space

IPv4 Network Fabric Controller Address Space.

--ipv6-address-space

IPv6 Network Fabric Controller Address Space.

--is-workload-management-network-enabled

A workload management network is required for all the tenant (workload) traffic. This traffic is only dedicated for Tenant workloads which are required to access internet or any other MSFT/Public endpoints. Default value is True.

Accepted values: False, True
--location -l

Location of Azure region When not specified, the location of the resource group will be used.

--managed-resource-group-configuration --mrg

Managed Resource Group configuration properties. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--nfc-sku

Network Fabric Controller SKU.

Accepted values: Basic, HighPerformance, Standard
--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--workload-er-connections

Workload management Network for hosting Proxy, NTP and DNS for workloads. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric controller delete

Delete the Network Fabric Controller resource.

az networkfabric controller delete [--ids]
                                   [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                   [--resource-group]
                                   [--resource-name]
                                   [--subscription]

Examples

Delete the Network Fabric Controller

az networkfabric controller delete --resource-group "example-rg" --resource-name "example-nfc"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the Network Fabric Controller.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric controller list

List all Network Fabric Controllers in the provided resource group or subscription.

az networkfabric controller list [--max-items]
                                 [--next-token]
                                 [--resource-group]

Examples

List the Network Fabric Controllers for Resource group

az networkfabric controller list --resource-group "example-rg"

List the Network Fabric Controllers for Subscription

az networkfabric controller list --subscription "<subscriptionId>"

Optional Parameters

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric controller show

Show details of the provided Network Fabric Controller resource.

az networkfabric controller show [--ids]
                                 [--resource-group]
                                 [--resource-name]
                                 [--subscription]

Examples

Show the Network Fabric Controller

az networkfabric controller show --resource-group "example-rg" --resource-name "example-nfc"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the Network Fabric Controller.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric controller update

Update the Network Fabric Controller resource.

az networkfabric controller update [--ids]
                                   [--infra-er-connections]
                                   [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                   [--resource-group]
                                   [--resource-name]
                                   [--subscription]
                                   [--tags]
                                   [--workload-er-connections]

Examples

Update the Network Fabric Controller

az networkfabric controller update --resource-group "example-rg"   --resource-name "example-nfc" --infra-er-connections "[{expressRouteCircuitId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/Microsoft.Network/expressRouteCircuits/example-expressRouteCircuit',expressRouteAuthorizationKey:'auth-key'}]" --workload-er-connections "[{expressRouteCircuitId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/Microsoft.Network/expressRouteCircuits/example-expressRouteCircuit',expressRouteAuthorizationKey:'auth-key'}]"

Help text for sub parameters under the specific parent can be viewed by using the shorthand syntax '??'. See https://github.com/Azure/azure-cli/tree/dev/doc/shorthand_syntax.md for more about shorthand syntax.

az networkfabric controller update --infra-er-connections "??"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--infra-er-connections

Infra ER connections to manage infra resources. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the Network Fabric Controller.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Resource tags Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--workload-er-connections

As part of an update, the workload ExpressRoute CircuitID should be provided to create and Provision a NFC. This Express route is dedicated for Workload services. (This is a Mandatory attribute). Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric controller wait

Place the CLI in a waiting state until a condition is met.

az networkfabric controller wait [--created]
                                 [--custom]
                                 [--deleted]
                                 [--exists]
                                 [--ids]
                                 [--interval]
                                 [--resource-group]
                                 [--resource-name]
                                 [--subscription]
                                 [--timeout]
                                 [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the Network Fabric Controller.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.