Supported metrics for Microsoft.ManagedNetworkFabric/networkDevices
The following table lists the metrics available for the Microsoft.ManagedNetworkFabric/networkDevices resource type.
Table headings
Metric - The metric display name as it appears in the Azure portal.
Name in Rest API - Metric name as referred to in the REST API.
Unit - Unit of measure.
Aggregation - The default aggregation type. Valid values: Average, Minimum, Maximum, Total, Count.
Dimensions - Dimensions available for the metric.
Time Grains - Intervals at which the metric is sampled. For example, PT1M indicates that the metric is sampled every minute, PT30M every 30 minutes, PT1H every hour, and so on.
DS Export- Whether the metric is exportable to Azure Monitor Logs via Diagnostic Settings.
For information on exporting metrics, see - Metrics export using data collection rules and Create diagnostic settings in Azure Monitor.
For information on metric retention, see Azure Monitor Metrics overview.
For a list of supported logs, see Supported log categories - Microsoft.ManagedNetworkFabric/networkDevices
| Category | Metric | Name in REST API | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| ACL State Counters | Acl Matched Packets Count of the number of packets matching the current ACL entry. |
AclMatchedPackets |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, AclSetName, AclEntrySequenceId, AclSetType |
PT1M | Yes |
| BGP Status | BGP Peer Status Operational state of the BGP peer. State is represented in numerical form. Idle : 1, Connect : 2, Active : 3, Opensent : 4, Openconfirm : 5, Established : 6 |
BgpPeerStatus |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, IpAddress |
PT1M | Yes |
| Component Operational State | Component Operational State The current operational status of the component. |
ComponentOperStatus |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Cpu Utilization Avg Avg cpu utilization. The Avg value of the percentage measure of the statistic over the time interval. |
CpuUtilizationAvg |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Cpu Utilization Instant Instantaneous Cpu utilization. The instantaneous value of the percentage measure of the statistic over the time interval. |
CpuUtilizationInstant |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Cpu Utilization Max Max cpu utilization. The maximum value of the percentage measure of the statistic over the time interval. |
CpuUtilizationMax |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Cpu Utilization Min Min cpu utilization. The minimum value of the percentage measure of the statistic over the time interval. |
CpuUtilizationMin |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Fan Speed Current fan speed. |
FanSpeed |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Interface QoS State Counters | Interface Dropped Octets Number of octets dropped by the queue due to overrun, that is tail-drop or AMQ (RED, WRED, etc) induced drops as indicated by the attached queue-management-profile. |
IfDroppedOctets |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName, QueueName |
PT1M | Yes |
| Interface QoS State Counters | Interface Dropped Octets Rate The calculated drop rate of octets from the queue. |
IfDroppedOctetsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName, QueueName |
PT1M | Yes |
| Interface QoS State Counters | Interface Dropped Pkts Number of packets dropped by the queue due to overrun, that is tail-drop or AMQ (RED, WRED, etc) induced drops as indicated by the attached queue-management-profile. |
IfDroppedPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName, QueueName |
PT1M | Yes |
| Interface QoS State Counters | Interface Dropped Pkts Rate The calculated drop rate of packets from the queue. |
IfDroppedPktsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName, QueueName |
PT1M | Yes |
| Interface State Counters | Eth Interface In CRC Errors The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error) |
IfEthInCrcErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In Fragment Frames The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). |
IfEthInFragmentFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In Jabber Frames Number of jabber frames received on the interface. Jabber frames are typically defined as oversize frames which also have a bad CRC. |
IfEthInJabberFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In MAC Control Frames MAC layer control frames received on the interface |
IfEthInMacControlFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In MAC Pause Frames MAC layer PAUSE frames received on the interface |
IfEthInMacPauseFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In Maxsize Exceeded The total number frames received that are well-formed dropped due to exceeding the maximum frame size on the interface. |
IfEthInMaxsizeExceeded |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In Oversize Frames The total number of frames received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
IfEthInOversizeFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface Out MAC Control Frames MAC layer control frames sent on the interface. |
IfEthOutMacControlFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface Out MAC Pause Frames MAC layer PAUSE frames sent on the interface. |
IfEthOutMacPauseFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface In Bits Rate The calculated received rate of the interface, measured in bits per second. |
IfInBitsRate |
BitsPerSecond | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Broadcast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were addressed to a broadcast address at this sub-layer. |
IfInBroadcastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Discards The number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. |
IfInDiscards |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface In Discards Rate The rate of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. |
IfInDiscardsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Errors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
IfInErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Errors Rate For packet-oriented interfaces, the rate of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
IfInErrorsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In FCS Errors Number of received packets which had errors in the frame check sequence (FCS), i.e., framing errors. |
IfInFcsErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Multicast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were addressed to a multicast address at this sub-layer. For a MAC-layer protocol, this includes both Group and Functional addresses. |
IfInMulticastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Octets The total number of octets received on the interface, including framing characters. |
IfInOctets |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Pkts The total number of packets received on the interface, including all unicast, multicast, broadcast and bad packets etc. |
IfInPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface In Pkts Rate The calculated received rate of the interface, measured in packets per second. |
IfInPktsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Unicast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were not addressed to a multicast or broadcast address at this sub-layer. |
IfInUnicastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface Out Bits Rate The calculated transmitted rate of the interface, measured in bits per second. |
IfOutBitsRate |
BitsPerSecond | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Broadcast Pkts The total number of packets that higher-level protocols requested be transmitted, and that were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. |
IfOutBroadcastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Discards The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. |
IfOutDiscards |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface Out Discards Rate The rate of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. |
IfOutDiscardsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Errors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. |
IfOutErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Errors Rate For packet-oriented interfaces, the rate of outbound packets that could not be transmitted because of errors. |
IfOutErrorsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Multicast Pkts The total number of packets that higher-level protocols requested be transmitted, and that were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC-layer protocol, this includes both Group and Functional addresses. |
IfOutMulticastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Octets The total number of octets transmitted out of the interface, including framing characters. |
IfOutOctets |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Pkts The total number of packets transmitted out of the interface, including all unicast, multicast, broadcast, and bad packets etc. |
IfOutPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface Out Pkts Rate The calculated transmitted rate of the interface, measured in packets per second. |
IfOutPktsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Unicast Pkts The total number of packets that higher-level requested be transmitted, and that were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. |
IfOutUnicastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Operational State | Interface Operational State The current operational state of the interface. State is represented in numerical form. Up: 0, Down: 1, Lower_layer_down: 2, Testing: 3, Unknown: 4, Dormant: 5, Not_present: 6. |
InterfaceOperStatus |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Errors Number of LACPDU illegal packet errors. |
LacpErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp In Pkts Number of LACPDUs received. |
LacpInPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Out Pkts Number of LACPDUs transmitted. |
LacpOutPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Rx Errors Number of LACPDU receive packet errors. |
LacpRxErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Tx Errors Number of LACPDU transmit packet errors. |
LacpTxErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Unknown Errors Number of LACPDU unknown packet errors. |
LacpUnknownErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LLDP State Counters | Lldp Frame In The number of lldp frames received. |
LldpFrameIn |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LLDP State Counters | Lldp Frame Out The number of frames transmitted out. |
LldpFrameOut |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LLDP State Counters | Lldp Tlv Unknown The number of frames received with unknown TLV. |
LldpTlvUnknown |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Resource Utilization | Memory Available The available memory physically installed, or logically allocated to the component. |
MemoryAvailable |
Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Memory Free Memory that is not used and is available for allocation. |
MemoryFree |
Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Memory Utilization Percentage The percentage of memory currently in use by processes running on the component, not considering reserved memory that is not available for use. |
MemoryUtilizationPercentage |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Memory Utilized The memory currently in use by processes running on the component, not considering reserved memory that is not available for use. |
MemoryUtilized |
Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Max Power Capacity Maximum power capacity of the power supply (watts). |
PowerSupplyCapacity |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Input Current The input current draw of the power supply (amps). |
PowerSupplyInputCurrent |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Input Voltage Input voltage to the power supply (volts). |
PowerSupplyInputVoltage |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Output Current The output current supplied by the power supply (amps) |
PowerSupplyOutputCurrent |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Output Power Output power supplied by the power supply (watts) |
PowerSupplyOutputPower |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Output Voltage Output voltage supplied by the power supply (volts). |
PowerSupplyOutputVoltage |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Temperature Instantaneous The instantaneous value of temperature in degrees Celsius of the component. |
TemperatureInstant |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Temperature Max Max temperature in degrees Celsius of the component. The maximum value of the statistic over the sampling period. |
TemperatureMax |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Transceiver Status | Transceiver Supply Voltage The instantaneous value of supply voltage to the transceiver in volts. |
TransceiverSupplyVoltage |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |