Rediger

Del via

Manage Arc VMs on Azure Local

  • Artikel

Applies to: Azure Local 2311.2 and later

This article describes how to manage Arc virtual machines (VMs) running on Azure Local. The procedures to enable guest management, start, stop, restart, pause, save, or delete an Arc VM, are detailed.

Prerequisites

  • Access to an Azure Local instance that's deployed and registered. The deployment of an Azure Local instance includes the creation of an Azure Arc resource bridge and a custom location.

    Go to the resource group in Azure. The displayed information includes the custom location and the Azure Arc resource bridge created for Azure Local. Make a note of the subscription, the resource group, and the custom location. You use them later in this scenario.

  • One or more Azure Arc VMs running on your Azure Local instance. For more information, see Create Azure Arc virtual machines on Azure Local.

Enable guest management

It's important to understand two agents in the context of guest management: a VM guest agent and an Azure Connected Machine agent. Every Azure Arc VM created via the Azure portal or the Azure CLI is provisioned with a guest agent (also called mocguestagent) on it.

When you enable guest management on an Azure Arc VM, the guest agent installs the Azure Connected Machine agent. You use the Azure Connected Machine agent to manage Azure Arc VM extensions on your VM.

Here are some key considerations for enabling guest management on a VM after you provision it:

  • Make sure that your Azure Local instance is running 2311.2 or later.
  • Enabling guest management after VM provisioning isn't supported for Windows Server 2012 and Windows Server 2012 R2.
  • The steps to enable guest management differ based on whether a guest agent is running on your Azure Arc VM.

Verify that the guest agent is running

To verify that the guest agent is running on the Azure Arc VM:

  1. Connect to the machine.

  2. Run the following command:

    az stack-hci-vm show --name "<VM name>" --resource-group "<Resource group name>"

    Here's a snippet of the sample output that indicates that the guest agent is running. Look for statuses under vmAgent in the output.

    "instanceView": {
  "vmAgent": {
    "statuses": [
      {
        "code": "ProvisioningState/succeeded",
        "displayStatus": "Connected",
        "level": "Info",
        "message": "Successfully established connection with mocguestagent",
        "time": "2024-01-13T00:57:39Z"
      },
      {
        "code": "ProvisioningState/succeeded",
        "displayStatus": "Connected",
        "level": "Info",
        "message": "New mocguestagent version detected 'v0.13.0-3-gd13b4794",
        "time": "2024-01-13T00:57:39Z"
      }
    ],
    "vmConfigAgentVersion": "v0.13.0-3-gd13b4794"
  }
}

    The guest agent is running when statuses indicates code as ProvisioningState/succeeded and indicates displayStatus as Connected.

    If you're running an older version, statuses indicates code as OK and indicates displayStatus as Active.

If your statuses don't match the preceding output, follow the steps in Enable guest management when the guest agent is not running.

Enable guest management on a VM when the guest agent is running

To enable guest management on an Azure Arc VM that has the guest agent running:

  1. Run the following command, which sets the enable-agent parameter to true:

    az stack-hci-vm update --name "mylocal-vm" --enable-agent true --resource-group "mylocal-rg"

    Guest management should take a few minutes to become enabled.

  2. Verify that guest management is enabled. Follow the steps in Verify that guest management is enabled in the Azure portal.

Enable guest management on a VM when the guest agent is not running

The guest agent doesn't run in two scenarios: when the status is Connecting and when the status is null. The following sections describe these scenarios and the corresponding steps.

Status displayed as Connecting

This sample output snippet shows a status of Connecting:

"instanceView": {
      "vmAgent": {
        "statuses": [
          {
            "code": "ProvisioningState/InProgress",
            "displayStatus": "Connecting",
            "level": "Info",
            "message": "Waiting for connection with mocguestagent",
            "time": "2024-01-19T01:41:15Z"
          }
        ]
      }
    },

The guest agent is not running when statuses indicates code as ProvisioningState/InProgress and indicates displayStatus as Connecting.

If you're running an older version, statuses indicates code as OK, displayStatus as Active, and message as Successfully started HyperV listener.

Follow these steps:

  1. Connect to the VM by using the OS-specific steps. Run Azure PowerShell as an administrator.

  2. Run one of the following commands to enable the guest agent on your VM, based on the OS type.

    Use this command for Linux:

    sudo -- sh -c 'mkdir /mociso && mount -L mocguestagentprov /mociso && bash /mociso/install.sh && umount /mociso && rm -df /mociso && eject LABEL=mocguestagentprov'

    Use this command for Windows:

    $d=Get-Volume -FileSystemLabel mocguestagentprov;$p=Join-Path ($d.DriveLetter+':\') 'install.ps1';powershell $p

    Here's a sample output for a Linux VM that shows successful installation of the guest agent.

    Screenshot that shows that the guest agent is successfully enabled on a VM.

  3. Connect to one of the machines. Run the following command to enable guest management:

    az stack-hci-vm update --name "mylocal-vm" --enable-agent true --resource-group "mylocal-rg"

  4. Verify that guest management is enabled. Follow the steps in Verify that guest management is enabled in the Azure portal.

Status displayed as null

The following sample output snippet shows a null status. This status indicates that the required iso for the guest agent is missing.

"instanceView": {
      "vmAgent": {
        "statuses": []
      }
    },

Follow these steps:

  1. Connect to a machine.

  2. Run the following command:

    az stack-hci-vm update --name "<VM Name>" --resource-group "<Resource group name>" --enable-vm-config-agent true

    The enable-vm-config-agent parameter mounts the required iso for the guest agent.

  3. Wait a few minutes and rerun the az stack-hci-vm show command. When the status shows Connecting, follow the steps in Status displayed as Connecting.

Verify that guest management is enabled in the Azure portal

  1. Go to the Azure portal.

  2. Go to Your Azure Local > Virtual machines, and then select the VM on which you enabled guest management.

  3. On the Overview page, on the Properties tab, go to Configuration. Guest management should show Enabled (Connected).

    Screenshot of the Azure portal that shows the area for verifying that guest management is enabled.

View VM properties

To view VM properties for your Azure Local instance, follow these steps in the Azure portal:

  1. Go to the Azure Local resource, and then go to Virtual machines.

  2. In the list of virtual machines, select the name of the VM whose properties you want to view.

    Screenshot of a virtual machine selected from the list of virtual machines.

  3. On the Overview page, select the Properties tab to view the properties of your VM.

    Screenshot of the properties of a selected Azure Arc virtual machine.

Start a VM

To start a VM, follow these steps in the Azure portal for your Azure Local instance:

  1. Go to the Azure Local resource, and then go to Virtual machines.

  2. In the list of virtual machines, select a VM that isn't running and that you want to start.

  3. On the Overview page for the VM, on the command bar, select Start.

    Screenshot of the button for starting a virtual machine on the overview page.

  4. Select Yes.

  5. Verify that the VM started.

Stop a VM

To stop a VM, follow these steps in the Azure portal for your Azure Local instance:

  1. Go to the Azure Local resource, and then go to Virtual machines.

  2. In the list of virtual machines, select a VM that's running and that you want to stop.

  3. On the Overview page for the VM, on the command bar, select Stop.

    Screenshot of the button for stopping a virtual machine on the overview page.

  4. Select Yes.

  5. Verify that the VM stopped.

Restart a VM

To restart a VM, follow these steps in the Azure portal for your Azure Local instance:

  1. Go to the Azure Local resource, and then go to Virtual machines.

  2. In the list of virtual machines, select a VM that's stopped and that you want to restart.

  3. On the Overview page for the VM, on the command bar, select Restart.

    Screenshot of the button for restarting a virtual machine on the overview page.

  4. Select Yes.

  5. Verify that the VM restarted.

Pause a VM

Pausing a VM is useful to save compute resources when you're not using the VM. Pausing a VM stops any CPU activity.

You can pause only running VMs. After you pause a VM, you can resume it later.

  1. Connect to a machine on your system.

  2. Run the following Azure PowerShell cmdlet:

    #Set input parameters

$rg = "<Resource group name>"
$vmName = "<VM name>"

#Pause the VM

az stack-hci-vm pause --name $vmName --resource-group $rg

    The parameters for this cmdlet are as follows:

    Parameter Description
    name Name of the virtual machine.
    resource-group Name of the resource group. You can configure the default group by using az configure --defaults group=<name>.
    subscription Name or ID of the subscription. You can configure the default subscription by using az account set -s NAME_OR_ID.

  3. Check the VM status to verify that the VM is paused:

    #Check the VM status

az stack-hci-vm show --name $vmName --resource-group $rg

  4. Start the VM to resume the VM from the paused state:

    #Start the VM

az stack-hci-vm start --name $vmName --resource-group $rg

  5. Verify that the VM is running.

Example output

Expand this section to see an example output. 

#Set parameters

[v-host1]: PS C:\Users\HCIDeploymentUser> $rg = "<Resource group name>"    
[v-host1]: PS C:\Users\HCIDeploymentUser> $vmName = "<VM name>"

#Pause the VM

[v-host1]: PS C:\Users\HCIDeploymentUser> az stack-hci-vm pause --name $vmName --resource-group $rg

#Show the current state of the VM
[v-host1]: PS C:\Users\HCIDeploymentUser> az stack-hci-vm show -g $rg --name $vmName
{
  "attestationStatus": null,
  "virtualmachineinstance": {
    "extendedLocation": {
      "name": "/subscriptions/<Subscription ID>/resourcegroups/<Resource group name>/providers/Microsoft.ExtendedLocation/customLocations/s-cluster-customlocation",
      "type": "CustomLocation"
    },
    "id": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.HybridCompute/machines/testvm001/providers/Microsoft.AzureStackHCI/virtualMachineInstances/default",
    "identity": null,
    "name": "default",
    "properties": {
      "guestAgentInstallStatus": null,
      "hardwareProfile": {
        "dynamicMemoryConfig": {
          "maximumMemoryMb": null,
          "minimumMemoryMb": null,
          "targetMemoryBuffer": null
        },
        "memoryMb": 2000,
        "processors": 2,
        "vmSize": "Custom"
      },
      "httpProxyConfig": null,
      "instanceView": {
        "vmAgent": {
          "statuses": [
            {
              "code": "ProvisioningState/succeeded",
              "displayStatus": "Connected",
              "level": "Info",
              "message": "Connection with mocguestagent was successfully reestablished",
              "time": "2024-06-24T16:30:05+00:00"
            },
          ],
          "vmConfigAgentVersion": "v0.18.0-4-gd54376b0"
        }
      },
      "networkProfile": {
        "networkInterfaces": []
      },
      "osProfile": {
        "adminPassword": null,
        "adminUsername": "azureuser",
        "computerName": "testvm001",
        "linuxConfiguration": {
          "disablePasswordAuthentication": false,
          "provisionVmAgent": false,
          "provisionVmConfigAgent": true,
          "ssh": {
            "publicKeys": null
          }
        },
        "windowsConfiguration": {
          "enableAutomaticUpdates": null,
          "provisionVmAgent": false,
          "provisionVmConfigAgent": true,
          "ssh": {
            "publicKeys": null
          },
          "timeZone": null
        }
      },
      "provisioningState": "Succeeded",
      "resourceUid": null,
      "securityProfile": {
        "enableTpm": false,
        "securityType": null,
        "uefiSettings": {
          "secureBootEnabled": true
        }
      },
      "status": {
        "errorCode": "",
        "errorMessage": "",
        "powerState": "Paused",
        "provisioningStatus": null
      },
      "storageProfile": {
        "dataDisks": [],
        "imageReference": {
          "id": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.AzureStackHCI/galleryImages/WinImage-26tdJUIS",
          "resourceGroup": "<Resource group name>"
        },
        "osDisk": {
          "id": null,
          "osType": "Windows"
        },
        "vmConfigStoragePathId": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.AzureStackHCI/storageContainers/UserStorage2-guid"
      },
      "vmId": "<guid>"
    },
    "resourceGroup": "<Resource group name>",
    "systemData": {
      "createdAt": "2024-06-24T01:29:06.594266+00:00",
      "createdBy": "7d6ffe2f-dac5-4e74-9bf2-4830cf7f4668",
      "createdByType": "Application",
      "lastModifiedAt": "2024-06-24T16:41:27.166668+00:00",
      "lastModifiedBy": "319f651f-7ddb-4fc6-9857-7aef9250bd05",
      "lastModifiedByType": "Application"
    },
    "type": "microsoft.azurestackhci/virtualmachineinstances"
  }
}

#Start the VM after it was paused. 

[v-host1]: PS C:\Users\HCIDeploymentUser> az stack-hci-vm start --name $vmName --resource-group $rg
Inside _start_initial/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.HybridCompute/machines/testvm0012024-02-01-preview/https://management.azure.com/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.HybridCompute/machines/testvm001/providers/Microsoft.AzureStackHCI/virtualMachineInstances/default/start?api-version=2024-02-01-preview

#Show the current state of the VM. The VM should be running.

[v-host1]: PS C:\Users\HCIDeploymentUser> az stack-hci-vm show -g $rg --name $vmName
{
  "attestationStatus": null,
  "virtualmachineinstance": {
    "extendedLocation": {
      "name": "/subscriptions/<Subscription ID>/resourcegroups/<Resource group name>/providers/Microsoft.ExtendedLocation/customLocations/s-cluster-customlocation",
      "type": "CustomLocation"
    },
    "id": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.HybridCompute/machines/testvm001/providers/Microsoft.AzureStackHCI/virtualMachineInstances/default",
    "identity": null,
    "name": "default",
    "properties": {
      "guestAgentInstallStatus": null,
      "hardwareProfile": {
        "dynamicMemoryConfig": {
          "maximumMemoryMb": null,
          "minimumMemoryMb": null,
          "targetMemoryBuffer": null
        },
        "memoryMb": 2000,
        "processors": 2,
        "vmSize": "Custom"
      },
      "httpProxyConfig": null,
      "instanceView": {
        "vmAgent": {
          "statuses": [
            {
              "code": "ProvisioningState/succeeded",
              "displayStatus": "Connected",
              "level": "Info",
              "message": "Connection with mocguestagent was successfully reestablished",
              "time": "2024-06-24T17:25:19+00:00"
            }
          ],
          "vmConfigAgentVersion": "v0.18.0-4-gd54376b0"
        }
      },
      "networkProfile": {
        "networkInterfaces": []
      },
      "osProfile": {
        "adminPassword": null,
        "adminUsername": "azureuser",
        "computerName": "testvm001",
        "linuxConfiguration": {
          "disablePasswordAuthentication": false,
          "provisionVmAgent": false,
          "provisionVmConfigAgent": true,
          "ssh": {
            "publicKeys": null
          }
        },
        "windowsConfiguration": {
          "enableAutomaticUpdates": null,
          "provisionVmAgent": false,
          "provisionVmConfigAgent": true,
          "ssh": {
            "publicKeys": null
          },
          "timeZone": null
        }
      },
      "provisioningState": "Succeeded",
      "resourceUid": null,
      "securityProfile": {
        "enableTpm": false,
        "securityType": null,
        "uefiSettings": {
          "secureBootEnabled": true
        }
      },
      "status": {
        "errorCode": "",
        "errorMessage": "",
        "powerState": "Running",
        "provisioningStatus": null
      },
      "storageProfile": {
        "dataDisks": [],
        "imageReference": {
          "id": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.AzureStackHCI/galleryImages/WinImage-26tdJUIS",
          "resourceGroup": "<Resource group name>"
        },
        "osDisk": {
          "id": null,
          "osType": "Windows"
        },
        "vmConfigStoragePathId": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.AzureStackHCI/storageContainers/UserStorage2-guid"
      },
      "vmId": "<guid>"
    },
    "resourceGroup": "<Resource group name>",
    "systemData": {
      "createdAt": "2024-06-24T01:29:06.594266+00:00",
      "createdBy": "<guid>",
      "createdByType": "Application",
      "lastModifiedAt": "2024-06-24T17:28:13.206935+00:00",
      "lastModifiedBy": "<guid>",
      "lastModifiedByType": "Application"
    },
    "type": "microsoft.azurestackhci/virtualmachineinstances"
  }
}

Save a VM

Saving a VM stores its current state to the disk and stops the VM. Saving a VM frees up memory and CPU resources. You can save only running VMs.

  1. Connect to a machine on your system.

  2. Run the following Azure PowerShell cmdlet:

    #Set input parameters

$rg = "<Resource group name>"
$vmName = "<VM name>"

#Save the VM

az stack-hci-vm save --name $vmName --resource-group $rg

    The parameters for this cmdlet are as follows:

    Parameter Description
    name Name of the virtual machine.
    resource-group Name of the resource group. You can configure the default group by using az configure --defaults group=<name>.
    subscription Name or ID of the subscription. You can configure the default subscription by using az account set -s <Subscription name or Subscription ID>.

  3. Check the VM status to verify that the VM is saved:

    #Check the VM status

az stack-hci-vm show --name $vmName --resource-group $rg

  4. Start the VM to resume the VM from the saved state:

    #Start the VM

az stack-hci-vm start --name $vmName --resource-group $rg

  5. Verify that the VM is running.

Example output

Expand this section to see an example output. 
#Set parameters

[v-host1]: PS C:\Users\HCIDeploymentUser> $rg = "<Resource group name>"    
[v-host1]: PS C:\Users\HCIDeploymentUser> $vmName = "<VM name>"

#Save the VM

[v-host1]: PS C:\Users\HCIDeploymentUser> az stack-hci-vm save --name $vmName --resource-group $rg

#Show the current state of the VM

[v-host1]: PS C:\Users\HCIDeploymentUser> az stack-hci-vm show -g $rg --name $vmName
{
  "attestationStatus": null,
  "virtualmachineinstance": {
    "extendedLocation": {
      "name": "/subscriptions/<Subscription ID>/resourcegroups/<Resource group name>/providers/Microsoft.ExtendedLocation/customLocations/s-cluster-customlocation",
      "type": "CustomLocation"
    },
    "id": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.HybridCompute/machines/testvm001/providers/Microsoft.AzureStackHCI/virtualMachineInstances/default",
    "identity": null,
    "name": "default",
    "properties": {
      "guestAgentInstallStatus": null,
      "hardwareProfile": {
        "dynamicMemoryConfig": {
          "maximumMemoryMb": null,
          "minimumMemoryMb": null,
          "targetMemoryBuffer": null
        },
        "memoryMb": 2000,
        "processors": 2,
        "vmSize": "Custom"
      },
      "httpProxyConfig": null,
      "instanceView": {
        "vmAgent": {
          "statuses": [
            {
              "code": "ProvisioningState/succeeded",
              "displayStatus": "Connected",
              "level": "Info",
              "message": "Connection with mocguestagent was successfully reestablished",
              "time": "2024-06-24T17:25:19+00:00"
            },
          ],
          "vmConfigAgentVersion": "v0.18.0-4-gd54376b0"
        }
      },
      "networkProfile": {
        "networkInterfaces": []
      },
      "osProfile": {
        "adminPassword": null,
        "adminUsername": "azureuser",
        "computerName": "testvm001",
        "linuxConfiguration": {
          "disablePasswordAuthentication": false,
          "provisionVmAgent": false,
          "provisionVmConfigAgent": true,
          "ssh": {
            "publicKeys": null
          }
        },
        "windowsConfiguration": {
          "enableAutomaticUpdates": null,
          "provisionVmAgent": false,
          "provisionVmConfigAgent": true,
          "ssh": {
            "publicKeys": null
          },
          "timeZone": null
        }
      },
      "provisioningState": "Succeeded",
      "resourceUid": null,
      "securityProfile": {
        "enableTpm": false,
        "securityType": null,
        "uefiSettings": {
          "secureBootEnabled": true
        }
      },
      "status": {
        "errorCode": "",
        "errorMessage": "",
        "powerState": "Saved",
        "provisioningStatus": null
      },
      "storageProfile": {
        "dataDisks": [],
        "imageReference": {
          "id": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.AzureStackHCI/galleryImages/WinImage-26tdJUIS",
          "resourceGroup": "<Resource group name>"
        },
        "osDisk": {
          "id": null,
          "osType": "Windows"
        },
        "vmConfigStoragePathId": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.AzureStackHCI/storageContainers/UserStorage2-345d968fa1e74e99a9509ab7f3d259fd"
      },
      "vmId": "<guid>"
    },
    "resourceGroup": "<Resource group name>",
    "systemData": {
      "createdAt": "2024-06-24T01:29:06.594266+00:00",
      "createdBy": "<guid>",
      "createdByType": "Application",
      "lastModifiedAt": "2024-06-24T18:29:02.794305+00:00",
      "lastModifiedBy": "<guid>",
      "lastModifiedByType": "Application"
    },
    "type": "microsoft.azurestackhci/virtualmachineinstances"
  }
}
    
#Start the VM after it was saved

[v-host1]: PS C:\Users\HCIDeploymentUser> az stack-hci-vm start --name $vmName --resource-group $rg
Inside _start_initial/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.HybridCompute/machines/testvm0012024-02-01-previewhttps://management.azure.com/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.HybridCompute/machines/testvm001/providers/Microsoft.AzureStackHCI/virtualMachineInstances/default/start?api-version=2024-02-01-preview

#Show the current state of the VM. The VM should be running.

[v-host1]: PS C:\Users\HCIDeploymentUser> az stack-hci-vm show -g $rg --name $vmName
{
  "attestationStatus": null,
  "virtualmachineinstance": {
    "extendedLocation": {
      "name": "/subscriptions/<Subscription ID>/resourcegroups/<Resource group name>/providers/Microsoft.ExtendedLocation/customLocations/s-cluster-customlocation",
      "type": "CustomLocation"
    },
    "id": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.HybridCompute/machines/testvm001/providers/Microsoft.AzureStackHCI/virtualMachineInstances/default",
    "identity": null,
    "name": "default",
    "properties": {
      "guestAgentInstallStatus": null,
      "hardwareProfile": {
        "dynamicMemoryConfig": {
          "maximumMemoryMb": null,
          "minimumMemoryMb": null,
          "targetMemoryBuffer": null
        },
        "memoryMb": 2000,
        "processors": 2,
        "vmSize": "Custom"
      },
      "httpProxyConfig": null,
      "instanceView": {
        "vmAgent": {
          "statuses": [
            {
              "code": "ProvisioningState/succeeded",
              "displayStatus": "Connected",
              "level": "Info",
              "message": "Connection with mocguestagent was successfully reestablished",
              "time": "2024-06-24T18:32:41+00:00"
            }
          ],
          "vmConfigAgentVersion": "v0.18.0-4-gd54376b0"
        }
      },
      "networkProfile": {
        "networkInterfaces": []
      },
      "osProfile": {
        "adminPassword": null,
        "adminUsername": "azureuser",
        "computerName": "testvm001",
        "linuxConfiguration": {
          "disablePasswordAuthentication": false,
          "provisionVmAgent": false,
          "provisionVmConfigAgent": true,
          "ssh": {
            "publicKeys": null
          }
        },
        "windowsConfiguration": {
          "enableAutomaticUpdates": null,
          "provisionVmAgent": false,
          "provisionVmConfigAgent": true,
          "ssh": {
            "publicKeys": null
          },
          "timeZone": null
        }
      },
      "provisioningState": "Succeeded",
      "resourceUid": null,
      "securityProfile": {
        "enableTpm": false,
        "securityType": null,
        "uefiSettings": {
          "secureBootEnabled": true
        }
      },
      "status": {
        "errorCode": "",
        "errorMessage": "",
        "powerState": "Running",
        "provisioningStatus": null
      },
      "storageProfile": {
        "dataDisks": [],
        "imageReference": {
          "id": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.AzureStackHCI/galleryImages/WinImage-26tdJUIS",
          "resourceGroup": "<Resource group name>"
        },
        "osDisk": {
          "id": null,
          "osType": "Windows"
        },
        "vmConfigStoragePathId": "/subscriptions/<Subscription ID>/resourceGroups/<Resource group name>/providers/Microsoft.AzureStackHCI/storageContainers/UserStorage2-guid"
      },
      "vmId": "<guid>"
    },
    "resourceGroup": "<Resource group name>",
    "systemData": {
      "createdAt": "2024-06-24T01:29:06.594266+00:00",
      "createdBy": "<guid>",
      "createdByType": "Application",
      "lastModifiedAt": "2024-06-24T18:35:18.206280+00:00",
      "lastModifiedBy": "<guid>",
      "lastModifiedByType": "Application"
    },
    "type": "microsoft.azurestackhci/virtualmachineinstances"
  }
}

Change the local account password

Follow these steps to change the local account passwords for an Azure Arc VM deployed on your Azure Local instance. The steps are different for Windows and Linux VMs.

  1. Sign in to the Azure Arc VM.

  2. Run the following Azure PowerShell command:

    # Define the username
$username = "AccountName"

# Prompt the user to enter the new password
$newPassword = Read-Host -AsSecureString "Enter the new password for $username"

# Prompt the user to re-enter the new password for verification
$verifyPassword = Read-Host -AsSecureString "Re-enter the new password for verification"

# Convert the secure strings to plain text for comparison
$plainPassword = [Runtime.InteropServices.Marshal]::PtrToStringAuto([Runtime.InteropServices.Marshal]::SecureStringToBSTR($newPassword))
$plainVerifyPassword = [Runtime.InteropServices.Marshal]::PtrToStringAuto([Runtime.InteropServices.Marshal]::SecureStringToBSTR($verifyPassword))

# Check if the passwords match, and change the password if they match. Fail if the passwords don't match.
if ($plainPassword -eq $plainVerifyPassword) {
    $account = [ADSI]"WinNT://./$username,user"
    $account.SetPassword($plainPassword)
    $account.SetInfo()

    Write-Host "Password for user $username has been reset successfully." -ForegroundColor Green
} else {
    Write-Host "The passwords do not match. Please try again." -ForegroundColor Red
}

Delete a VM

Deleting a VM doesn't delete all the resources associated with the VM. For example, it doesn't delete the data disks and the network interfaces associated with the VM. You need to locate and delete these resources separately.

To delete a VM, follow these steps in the Azure portal for your Azure Local instance:

  1. Go to the Azure Local resource, and then go to Virtual machines.

  2. In the list of virtual machines, select a VM that you want to remove from your system.

  3. On the Overview page for the VM, on the command bar, select Delete.

  4. You're prompted to confirm the deletion. Select Yes.

    Screenshot of the warning for deleting a virtual machine.

  5. Go to the resource group where this VM was deployed. Verify that the VM is removed from the list of resources in the resource group.

  6. Locate the associated resources, such as the network interfaces and data disks, and delete them. You might need to select Show hidden types to view the resources associated with this VM that weren't deleted.

    Screenshot of hidden types of resources associated with a virtual machine.

Conduct live migration of Azure Arc VMs

Live migration of Azure Arc VMs across Azure Local nodes is supported via on-premises tools like Failover Cluster Manager or Windows Admin Center. Live migration of VM storage is not supported.

Change cores and memory

To change cores and memory, follow these steps in the Azure portal for your Azure Local instance:

  1. Go to your Azure Local resource, and then go to Virtual machines.

  2. In the list of VMs, select and go to the VM whose cores and memory you want to modify.

  3. Under Settings, select Size. Edit the Virtual processor count or Memory (MB) values to change the cores or the memory size for the VM. For memory, only the size can be changed. You can't change the memory type after a VM is created.

    Screenshot of the pane for changing cores and memory size of a VM.

Related content