Introduction to Time Travel Debugging objects

Článek
11/20/2024

This section describes how to use the data model to query time travel traces. This can be a useful tool to answer questions like these about the code that is captured in a time travel trace.

What exceptions are in the trace?
At what point in time in the trace did a specific code module load?
When were threads created/terminated in the trace?
What are the longest running threads in the trace?

There are TTD extensions that add data to the Session and Process data model objects. The TTD data model objects can be accessed through the dx (Display Debugger Object Model Expression) command, WinDbg's model windows, JavaScript and C++. The TTD extensions are automatically loaded when debugging a time travel trace.

Process Objects

The primary objects added to Process objects can be found in the TTD namespace off of any Process object. For example, @$curprocess.TTD.

0:000> dx @$curprocess.TTD
@$curprocess.TTD                
    Index           
    Threads         
    Events          
    DebugOutput     
    Lifetime         : [2C8:0, 16EC:98A]
    DefaultMemoryPolicy : InFragmentAggressive
    SetPosition      [Sets the debugger to point to the given position on this process.]
    GatherMemoryUse  [0]
    RecordClients   
    PrevMemoryAccess [(accessMask, address, size [, address, size, ...]) - Find the previous matching memory access before current position.]
    NextMemoryAccess [(accessMask, address, size [, address, size, ...]) - Find the next matching memory access after current position.]
    Recorder

For general information on working with LINQ queries and debugger objects, see Using LINQ With the debugger objects.

Properties

Object	Description
Lifetime	A TTD range object describing the lifetime of the entire trace.
Threads	Contains a collection of TTD thread objects, one for every thread throughout the lifetime of the trace.
Events	Contains a collection of TTD event objects, one for every event in the trace.

Methods

Method	Description
SetPosition()	Takes an integer between 0 and 100 or string in N:N form as input and jumps the trace to that location. See !tt for more information.

Session Objects

The primary objects added to Session objects can be found in the TTD namespace off of any Session object. For example, @$cursession.TTD.

0:000> dx @$cursession.TTD
@$cursession.TTD                
    Calls            [Returns call information from the trace for the specified set of methods: TTD.Calls("module!method1", "module!method2", ...) For example: dx @$cursession.TTD.Calls("user32!SendMessageA")]
    Memory           [Returns memory access information for specified address range: TTD.Memory(startAddress, endAddress [, "rwec"])]
    MemoryForPositionRange [Returns memory access information for specified address range and position range: TTD.MemoryForPositionRange(startAddress, endAddress [, "rwec"], minPosition, maxPosition)]
    PinObjectPosition [Pins an object to the given time position: TTD.PinObjectPosition(obj, pos)]
    AsyncQueryEnabled : false
    RichQueryTypesEnabled : true
    DefaultParameterCount : 0x4
    Data             : Normalized data sources based on the contents of the time travel trace
    Utility          : Methods that can be useful when analyzing time travel traces
    Analyzers        : Methods that perform code analysis on the time travel trace
    Bookmarks        : Bookmark collection
    Checkers         : Checkers (scripts for detection of common issues recorded in a time travel trace)

Note

There are some objects and methods added by TTDAnalyze that are used for internal functions of the extension. Not all namespaces are documented, and the current namespaces will evolve over time.

Methods

Method	Description
Data.Heap()	A collection of heap objects that were allocated during the trace. Note that this is a function that does computation, so it takes a while to run.
Calls()	Returns a collection of calls objects that match the input string. The input string can contain wildcards. Note that this is a function that does computation, so it takes a while to run.
Memory()	This is a method that takes beginAddress, endAddress and dataAccessMask parameters and returns a collection of memory objects. Note that this is a function that does computation, so it takes a while to run.

Sorting query output

Use the OrderBy() method to sort the rows returned from the query by one or more columns. This example sorts by TimeStart in ascending order.

0:000> dx -r2 @$cursession.TTD.Calls("kernelbase!GetLastError").OrderBy(c => c.TimeStart)
@$cursession.TTD.Calls("kernelbase!GetLastError").OrderBy(c => c.TimeStart)                
    [0x0]           
        EventType        : 0x0
        ThreadId         : 0x2d98
        UniqueThreadId   : 0x2
        TimeStart        : 718:7D7 [Time Travel]
        TimeEnd          : 718:7DA [Time Travel]
        Function         : KERNELBASE!GetLastError
        FunctionAddress  : 0x7ff996cf20f0
        ReturnAddress    : 0x7ff99855ac5a
        ReturnValue      : 0x0 [Type: unsigned long]
        Parameters      
        SystemTimeStart  : Friday, January 12, 2024 21:18:40.862
        SystemTimeEnd    : Friday, January 12, 2024 21:18:40.862
    [0x1]           
        EventType        : 0x0
        ThreadId         : 0x2d98
        UniqueThreadId   : 0x2
        TimeStart        : 72D:1B3 [Time Travel]
        TimeEnd          : 72D:1B6 [Time Travel]
        Function         : KERNELBASE!GetLastError
        FunctionAddress  : 0x7ff996cf20f0
        ReturnAddress    : 0x7ff9961538df
        ReturnValue      : 0x57 [Type: unsigned long]
        Parameters      
        SystemTimeStart  : Friday, January 12, 2024 21:18:40.862
        SystemTimeEnd    : Friday, January 12, 2024 21:18:40.862
...

To display additional depth of the data model objects the -r2 recursion level option is used. For more information about the dx command options, see dx (Display Debugger Object Model Expression).

This example sorts by TimeStart in descending order.

0:000> dx -r2 @$cursession.TTD.Calls("kernelbase!GetLastError").OrderByDescending(c => c.TimeStart)
@$cursession.TTD.Calls("kernelbase!GetLastError").OrderByDescending(c => c.TimeStart)                
    [0x1896]        
        EventType        : Call
        ThreadId         : 0x3a10
        UniqueThreadId   : 0x2
        TimeStart        : 464224:34 [Time Travel]
        TimeEnd          : 464224:37 [Time Travel]
        Function         : UnknownOrMissingSymbols
        FunctionAddress  : 0x7561ccc0
        ReturnAddress    : 0x7594781c
        ReturnValue      : 0x0
        Parameters      
    [0x18a0]        
        EventType        : Call
        ThreadId         : 0x3a10
        UniqueThreadId   : 0x2
        TimeStart        : 464223:21 [Time Travel]
        TimeEnd          : 464223:24 [Time Travel]
        Function         : UnknownOrMissingSymbols
        FunctionAddress  : 0x7561ccc0
        ReturnAddress    : 0x7594781c
        ReturnValue      : 0x0
        Parameters

Specifying elements in a query

To select a specific element a variety of qualifiers can be appended to the query. For example, the query displays the first call that contains "kernelbase!GetLastError".

0:000> dx @$cursession.TTD.Calls("kernelbase!GetLastError").First()
@$cursession.TTD.Calls("kernelbase!GetLastError").First()                
    EventType        : 0x0
    ThreadId         : 0x2d98
    UniqueThreadId   : 0x2
    TimeStart        : 718:7D7 [Time Travel]
    TimeEnd          : 718:7DA [Time Travel]
    Function         : KERNELBASE!GetLastError
    FunctionAddress  : 0x7ff996cf20f0
    ReturnAddress    : 0x7ff99855ac5a
    ReturnValue      : 0x0 [Type: unsigned long]
    Parameters      
    SystemTimeStart  : Friday, January 12, 2024 21:18:40.862
    SystemTimeEnd    : Friday, January 12, 2024 21:18:40.862

Filtering in a query

Use the Select() method to choose which columns to see and modify the column display name.

This example returns rows where ReturnValue is not zero and selects to display the TimeStart and ReturnValue columns with custom display names of Time and Error.

0:000> dx -r2 @$cursession.TTD.Calls("kernelbase!GetLastError").Where(c => c.ReturnValue != 0).Select(c => new { Time = c.TimeStart, Error = c.ReturnValue })
@$cursession.TTD.Calls("kernelbase!GetLastError").Where(c => c.ReturnValue != 0).Select(c => new { Time = c.TimeStart, Error = c.ReturnValue })                
    [0x1]           
        Time             : 72D:1B3 [Time Travel]
        Error            : 0x57 [Type: unsigned long]
    [0x2]           
        Time             : 72D:1FC [Time Travel]
        Error            : 0x2af9 [Type: unsigned long]
    [0x3]           
        Time             : 72D:26E [Time Travel]
        Error            : 0x2af9 [Type: unsigned long]

Grouping

Use the GroupBy() method to group data returned by the query to do perform analysis using structured results This example groups the time locations by error number.

0:000> dx -r2 @$cursession.TTD.Calls("kernelbase!GetLastError").Where(c => c.ReturnValue != 0).Select(c => new { Time = c.TimeStart, Error = c.ReturnValue }).GroupBy(x => x.Error)
@$s = @$cursession.TTD.Calls("kernelbase!GetLastError").Where(c => c.ReturnValue != 0).Select(c => new { Time = c.TimeStart, Error = c.ReturnValue }).GroupBy(x => x.Error)                
    [0x36b7]        
        [0x0]           
        [0x1]           
        [0x2]           
        [0x3]           
        [...]           
    [0x3f0]         
        [0x0]           
        [0x1]           
        [0x2]           
        [0x3]           
...

Assigning result of a query to a variable

Use this syntax to assigning result of a query to a variable dx @$var = <expression>

This example assigns the results of a query to myResults

dx -r2 @$myResults = @$cursession.TTD.Calls("kernelbase!GetLastError").Where(c => c.ReturnValue != 0).Select(c => new { Time = c.TimeStart, Error = c.ReturnValue })

Use the dx command to display the newly created variable using the -g grid option. For more information on the dx command options, see dx (Display Debugger Object Model Expression).

0:000> dx -g @$myResults
========================================
=           = (+) Time     = (+) Error =
========================================
= [0x13]    - 3C64A:834    - 0x36b7    =
= [0x1c]    - 3B3E7:D6     - 0x3f0     =
= [0x1d]    - 3C666:857    - 0x36b7    =
= [0x20]    - 3C67E:12D    - 0x2       =
= [0x21]    - 3C6F1:127    - 0x2       =
= [0x23]    - 3A547:D6     - 0x3f0     =
= [0x24]    - 3A59B:D0     - 0x3f0     =

Examples

Querying for exceptions

This LINQ query uses the TTD.Event object to display all of the exceptions in the trace.

0:000> dx @$curprocess.TTD.Events.Where(t => t.Type == "Exception").Select(e => e.Exception)
@$curprocess.TTD.Events.Where(t => t.Type == "Exception").Select(e => e.Exception)
    [0x0]            : Exception 0x000006BA of type Software at PC: 0X777F51D0
    [0x1]            : Exception 0x000006BA of type Software at PC: 0X777F51D0
    [0x2]            : Exception 0xE06D7363 of type CPlusPlus at PC: 0X777F51D0

Querying for specific API calls

Use TTD.Calls object to query for specific API calls. In this example, an error has occurred when calling user32!MessageBoxW, the Windows API to show a message box. We list all calls to MessageBoxW , order it by the start time of the function, and then pick the last call.

0:000> dx @$cursession.TTD.Calls("user32!MessageBoxW").OrderBy(c => c.TimeStart).Last()
@$cursession.TTD.Calls("user32!MessageBoxW").OrderBy(c => c.TimeStart).Last()                
    EventType        : Call
    ThreadId         : 0x3a10
    UniqueThreadId   : 0x2
    TimeStart        : 458310:539 [Time Travel]
    TimeEnd          : 45C648:61 [Time Travel]
    Function         : UnknownOrMissingSymbols
    FunctionAddress  : 0x750823a0
    ReturnAddress    : 0x40cb93
    ReturnValue      : 0x10a7000000000001
    Parameters

Querying for the load event of a specific module

First, use the lm (List Loaded Modules) command to display the loaded modules.

0:000> lm
start    end        module name
012b0000 012cf000   CDog_Console   (deferred)             
11570000 1158c000   VCRUNTIME140D   (deferred)             
11860000 119d1000   ucrtbased   (deferred)             
119e0000 11b63000   TTDRecordCPU   (deferred)             
11b70000 11cb1000   TTDWriter   (deferred)             
73770000 73803000   apphelp    (deferred)             
73ea0000 74062000   KERNELBASE   (deferred)             
75900000 759d0000   KERNEL32   (deferred)             
77070000 771fe000   ntdll      (private pdb symbols)

Then use the following dx command to see at what position in the trace a specific module was loaded, such as ntdll.

dx @$curprocess.TTD.Events.Where(t => t.Type == "ModuleLoaded").Where(t => t.Module.Name.Contains("ntdll.dll")) 
@$curprocess.TTD.Events.Where(t => t.Type == "ModuleLoaded").Where(t => t.Module.Name.Contains("ntdll.dll"))                 
    [0x0]            : Module Loaded at position: A:0

This LINQ query displays the load event(s) of a particular module.

0:000> dx @$curprocess.TTD.Events.Where(t => t.Type == "ModuleUnloaded").Where(t => t.Module.Name.Contains("ntdll.dll")) 
@$curprocess.TTD.Events.Where(t => t.Type == "ModuleUnloaded").Where(t => t.Module.Name.Contains("ntdll.dll"))                 
    [0x0]            : Module Unloaded at position: FFFFFFFFFFFFFFFE:0

The address of FFFFFFFFFFFFFFFE:0 indicates the end of the trace.

Querying for all of the error checks in the trace

Use this command to sort by all of the error checks in the trace by error count.

0:000> dx -g @$cursession.TTD.Calls("kernelbase!GetLastError").Where( x=> x.ReturnValue != 0).GroupBy(x => x.ReturnValue).Select(x => new { ErrorNumber = x.First().ReturnValue, ErrorCount = x.Count()}).OrderByDescending(p => p.ErrorCount),d
==================================================
=                 = (+) ErrorNumber = ErrorCount =
==================================================
= [1008]          - 1008            - 8668       =
= [14007]         - 14007           - 4304       =
= [2]             - 2               - 1710       =
= [6]             - 6               - 1151       =
= [1400]          - 1400            - 385        =
= [87]            - 87              - 383        =

Querying for the time position in the trace when threads were created

Use this dx command to display all of the events in the trace in grid format (-g).

0:000> dx -g @$curprocess.TTD.Events
==================================================================================================================================================================================================
=                                                          = (+) Type            = (+) Position          = (+) Module                                                   = (+) Thread             =
==================================================================================================================================================================================================
= [0x0] : Module Loaded at position: 2:0                   - ModuleLoaded        - 2:0                   - Module C:\Users\USER1\Documents\Visual Studio 2015\Proje... -                        =
= [0x1] : Module Loaded at position: 3:0                   - ModuleLoaded        - 3:0                   - Module C:\WINDOWS\SYSTEM32\VCRUNTIME140D.dll at address 0... -                        =
= [0x2] : Module Loaded at position: 4:0                   - ModuleLoaded        - 4:0                   - Module C:\WINDOWS\SYSTEM32\ucrtbased.dll at address 0X118... -                        =
= [0x3] : Module Loaded at position: 5:0                   - ModuleLoaded        - 5:0                   - Module C:\Users\USER1\AppData\Local\Dbg\UI\Fast.20170907... -                        =
= [0x4] : Module Loaded at position: 6:0                   - ModuleLoaded        - 6:0                   - Module C:\Users\USER1\AppData\Local\Dbg\UI\Fast.20170907... -                        =
= [0x5] : Module Loaded at position: 7:0                   - ModuleLoaded        - 7:0                   - Module C:\WINDOWS\SYSTEM32\apphelp.dll at address 0X73770... -                        =
= [0x6] : Module Loaded at position: 8:0                   - ModuleLoaded        - 8:0                   - Module C:\WINDOWS\System32\KERNELBASE.dll at address 0X73... -                        =
= [0x7] : Module Loaded at position: 9:0                   - ModuleLoaded        - 9:0                   - Module C:\WINDOWS\System32\KERNEL32.DLL at address 0X7590... -                        =
= [0x8] : Module Loaded at position: A:0                   - ModuleLoaded        - A:0                   - Module C:\WINDOWS\SYSTEM32\ntdll.dll at address 0X7707000... -                        =
= [0x9] : Thread created at D:0                            - ThreadCreated       - D:0                   -                                                              - UID: 2, TID: 0x4C2C    =
= [0xa] : Thread terminated at 64:0                        - ThreadTerminated    - 64:0                  -                                                              - UID: 2, TID: 0x4C2C    =
= [0xb] : Thread created at 69:0                           - ThreadCreated       - 69:0                  -                                                              - UID: 3, TID: 0x4CFC    =
= [0xc] : Thread created at 6A:0                           - ThreadCreated       - 6A:0                  -                                                              - UID: 4, TID: 0x27B0    =
= [0xd] : Thread terminated at 89:0                        - ThreadTerminated    - 89:0                  -                                                              - UID: 4, TID: 0x27B0    =
= [0xe] : Thread terminated at 8A:0                        - ThreadTerminated    - 8A:0                  -                                                              - UID: 3, TID: 0x4CFC    =
= [0xf] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0  - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\Users\USER1\Documents\Visual Studio 2015\Proje... -                        =
= [0x10] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0 - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\Users\USER1\AppData\Local\Dbg\UI\Fast.20170907... -                        =
= [0x11] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0 - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\WINDOWS\SYSTEM32\VCRUNTIME140D.dll at address 0... -                        =
= [0x12] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0 - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\Users\USER1\AppData\Local\Dbg\UI\Fast.20170907... -                        =
= [0x13] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0 - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\WINDOWS\SYSTEM32\ucrtbased.dll at address 0X118... -                        =
= [0x14] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0 - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\WINDOWS\SYSTEM32\apphelp.dll at address 0X73770... -                        =
= [0x15] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0 - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\WINDOWS\System32\KERNELBASE.dll at address 0X73... -                        =
= [0x16] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0 - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\WINDOWS\System32\KERNEL32.DLL at address 0X7590... -                        =
= [0x17] : Module Unloaded at position: FFFFFFFFFFFFFFFE:0 - ModuleUnloaded      - FFFFFFFFFFFFFFFE:0    - Module C:\WINDOWS\SYSTEM32\ntdll.dll at address 0X7707000... -                        =
==================================================================================================================================================================================================

Select any of the columns with a + sign to sort the output.

Use this LINQ query to display in grid format, the time position in the trace when threads were created (Type == "ThreadCreated").

dx -g @$curprocess.TTD.Events.Where(t => t.Type == "ThreadCreated").Select(t => t.Thread) 
===========================================================================================================
=                             = (+) UniqueId = (+) Id    = (+) Lifetime                 = (+) ActiveTime  =
===========================================================================================================
= [0x0] : UID: 2, TID: 0x4C2C - 0x2          - 0x4c2c    - [0:0, FFFFFFFFFFFFFFFE:0]    - [D:0, 64:0]     =
= [0x1] : UID: 3, TID: 0x4CFC - 0x3          - 0x4cfc    - [0:0, 8A:0]                  - [69:0, 8A:0]    =
= [0x2] : UID: 4, TID: 0x27B0 - 0x4          - 0x27b0    - [0:0, 89:0]                  - [6A:0, 89:0]    =
===========================================================================================================

Use this LINQ query to display in grid format, the time positions in the trace when threads were terminated (Type == "ThreadTerminated").

0:000> dx -g @$curprocess.TTD.Events.Where(t => t.Type == "ThreadTerminated").Select(t => t.Thread) 
===========================================================================================================
=                             = (+) UniqueId = (+) Id    = (+) Lifetime                 = (+) ActiveTime  =
===========================================================================================================
= [0x0] : UID: 2, TID: 0x4C2C - 0x2          - 0x4c2c    - [0:0, FFFFFFFFFFFFFFFE:0]    - [D:0, 64:0]     =
= [0x1] : UID: 4, TID: 0x27B0 - 0x4          - 0x27b0    - [0:0, 89:0]                  - [6A:0, 89:0]    =
= [0x2] : UID: 3, TID: 0x4CFC - 0x3          - 0x4cfc    - [0:0, 8A:0]                  - [69:0, 8A:0]    =
===========================================================================================================

Sorting output to determine the longest running threads

Use this LINQ query to display in grid format, the approximate longest running threads in the trace.

0:000> dx -g @$curprocess.TTD.Events.Where(e => e.Type == "ThreadTerminated").Select(e => new { Thread = e.Thread, ActiveTimeLength = e.Thread.ActiveTime.MaxPosition.Sequence - e.Thread.ActiveTime.MinPosition.Sequence }).OrderByDescending(t => t.ActiveTimeLength)
=========================================================
=          = (+) Thread              = ActiveTimeLength =
=========================================================
= [0x0]    - UID: 2, TID: 0x1750     - 0x364030         =
= [0x1]    - UID: 3, TID: 0x420C     - 0x360fd4         =
= [0x2]    - UID: 7, TID: 0x352C     - 0x35da46         =
= [0x3]    - UID: 9, TID: 0x39F4     - 0x34a5b5         =
= [0x4]    - UID: 11, TID: 0x4288    - 0x326199         =
= [0x5]    - UID: 13, TID: 0x21C8    - 0x2fa8d8         =
= [0x6]    - UID: 14, TID: 0x2188    - 0x2a03e3         =
= [0x7]    - UID: 15, TID: 0x40E8    - 0x29e7d0         =
= [0x8]    - UID: 16, TID: 0x124     - 0x299677         =
= [0x9]    - UID: 4, TID: 0x2D74     - 0x250f43         =
= [0xa]    - UID: 5, TID: 0x2DC8     - 0x24f921         =
= [0xb]    - UID: 6, TID: 0x3B1C     - 0x24ec8e         =
= [0xc]    - UID: 10, TID: 0x3808    - 0xf916f          =
= [0xd]    - UID: 12, TID: 0x26B8    - 0x1ed3a          =
= [0xe]    - UID: 17, TID: 0x37D8    - 0xc65            =
= [0xf]    - UID: 8, TID: 0x45F8     - 0x1a2            =
=========================================================

Querying for read accesses to a memory range

Use the TTD.Memory object to query for to query for read accesses to a memory range.

The Thread Environment Block (TEB) is a structure that contains all the information regarding the state of a thread, including the result returned by GetLastError(). You can query this data structure by running dx @$teb for the current thread. One of TEB's members is a LastErrorValue variable, 4 bytes in size. We can reference the LastErrorValue member in the TEB using this syntax. dx &@$teb->LastErrorValue.

The example query shows how to find every read operation done in that range in memory, select all the reads that happen before the a dialog was created and then sort the result to find the last read operation.

0:000> dx @$cursession.TTD.Memory(&@$teb->LastErrorValue, &@$teb->LastErrorValue + 0x4, "r")
@$cursession.TTD.Memory(&@$teb->LastErrorValue, &@$teb->LastErrorValue + 0x4, "r")
    [0x0]           
    [0x1]           
    [0x2]           
    [0x3]

If in our trace a "dialog" event has taken place we can run a query to find every read operation done in that range in memory, select all the reads that happen before the dialog got created and then sort the result to find the last read operation. Then time travel to that point in time by calling SeekTo() on the resulting time position.


:000> dx @$cursession.TTD.Memory(&@$teb->LastErrorValue, &@$teb->LastErrorValue + 0x4, "r").Where(m => m.TimeStart < @$dialog).OrderBy(m => m.TimeStart).Last().TimeEnd.SeekTo()
Setting position: 458300:37
ModLoad: 6cee0000 6cf5b000   C:\WINDOWS\system32\uxtheme.dll
ModLoad: 75250000 752e6000   C:\WINDOWS\System32\OLEAUT32.dll
ModLoad: 76320000 7645d000   C:\WINDOWS\System32\MSCTF.dll
ModLoad: 76cc0000 76cce000   C:\WINDOWS\System32\MSASN1.dll

GitHub TTD Query Lab

For a tutorial on how to debug C++ code using a Time Travel Debugging recording using queries to find information about the execution of the problematic code in question, see WinDbg-Samples - Time Travel Debugging and Queries.

All of the code used in the lab is available here: https://github.com/Microsoft/WinDbg-Samples/tree/master/TTDQueries/app-sample.

Troubleshooting TTD Queries

"UnknownOrMissingSymbols" as the function names

The data model extension needs full symbol information in order to provide function names, parameter values, etc. When full symbol information is not available the debugger uses "UnknownOrMissingSymbols" as the function name.

If you have private symbols you will get the function name and the correct list of parameters.
If you have public symbols you will get the function name and a default set of parameters - four unsigned 64-bit ints.
If you have no symbol information for the module you are querying, then “UnknownOrMissingSymbols” is used as the name.

TTD Queries for calls

There can be a several reasons that a query doesn't return anything for calls to a DLL.

The syntax for the call isn't quite right. Try verifying the call syntax by using the x (Examine Symbols) x <call>. If the module name returned by x is in uppercase, use that.
The DLL is not loaded yet and is loaded later in the trace. To work around this travel to a point in time after the DLL is loaded and redo the query.
The call is inlined which the query engine is unable to track.
The query pattern uses wildcards which returns too many functions. Try to make the query pattern more specific so that the number of matched functions is small enough.

Sdílet prostřednictvím

Introduction to Time Travel Debugging objects

Process Objects

Properties

Methods

Session Objects

Methods

Sorting query output

Specifying elements in a query

Filtering in a query

Grouping

Assigning result of a query to a variable

Examples

Querying for exceptions

Querying for specific API calls

Querying for the load event of a specific module

Querying for all of the error checks in the trace

Querying for the time position in the trace when threads were created

Sorting output to determine the longest running threads

Querying for read accesses to a memory range

GitHub TTD Query Lab

Troubleshooting TTD Queries

"UnknownOrMissingSymbols" as the function names

TTD Queries for calls

See Also

Váš názor

Další materiály