Set-MpPreference
Configures preferences for Windows Defender scans and updates.
Syntax
Set-MpPreference
[-ExclusionPath <String[]>]
[-ExclusionExtension <String[]>]
[-ExclusionProcess <String[]>]
[-ExclusionIpAddress <String[]>]
[-RealTimeScanDirection <ScanDirection>]
[-IntelTDTEnabled <UInt32>]
[-QuarantinePurgeItemsAfterDelay <UInt32>]
[-RemediationScheduleDay <Day>]
[-RemediationScheduleTime <DateTime>]
[-ReportingAdditionalActionTimeOut <UInt32>]
[-ReportingCriticalFailureTimeOut <UInt32>]
[-ReportingNonCriticalTimeOut <UInt32>]
[-ScanAvgCPULoadFactor <Byte>]
[-CheckForSignaturesBeforeRunningScan <Boolean>]
[-ScanPurgeItemsAfterDelay <UInt32>]
[-ScanOnlyIfIdleEnabled <Boolean>]
[-ScanParameters <ScanType>]
[-ScanScheduleDay <Day>]
[-ScanScheduleQuickScanTime <DateTime>]
[-ScanScheduleOffset <UInt32>]
[-ScanScheduleTime <HH:MM:SS>]
[-SignatureFirstAuGracePeriod <UInt32>]
[-SignatureAuGracePeriod <UInt32>]
[-SignatureDefinitionUpdateFileSharesSources <String>]
[-SignatureDisableUpdateOnStartupWithoutEngine <Boolean>]
[-SignatureFallbackOrder <String>]
[-SharedSignaturesPath <String>]
[-SignatureScheduleDay <Day>]
[-SignatureScheduleTime <DateTime>]
[-SignatureUpdateCatchupInterval <UInt32>]
[-SignatureUpdateInterval <UInt32>]
[-SignatureBlobUpdateInterval <UInt32>]
[-SignatureBlobFileSharesSources <String>]
[-MeteredConnectionUpdates <Boolean>]
[-AllowNetworkProtectionOnWinServer <Boolean>]
[-DisableDatagramProcessing <Boolean>]
[-DisableCpuThrottleOnIdleScans <Boolean>]
[-MAPSReporting <MAPSReportingType>]
[-SubmitSamplesConsent <SubmitSamplesConsentType>]
[-DisableAutoExclusions <Boolean>]
[-DisablePrivacyMode <Boolean>]
[-RandomizeScheduleTaskTimes <Boolean>]
[-SchedulerRandomizationTime <UInt32>]
[-DisableBehaviorMonitoring <Boolean>]
[-DisableRealtimeMonitoring <Boolean>]
[-DisableScriptScanning <Boolean>]
[-DisableArchiveScanning <Boolean>]
[-DisableCacheMaintenance <UInt32>]
[-DisableCatchupFullScan <Boolean>]
[-DisableCatchupQuickScan <Boolean>]
[-DisableEmailScanning <Boolean>]
[-DisableRemovableDriveScanning <Boolean>]
[-DisableRestorePoint <Boolean>]
[-DisableScanningMappedNetworkDrivesForFullScan <Boolean>]
[-DisableScanningNetworkFiles <Boolean>]
[-DisableIOAVProtection <Boolean>]
[-AllowSwitchToAsyncInspection <Boolean>]
[-UILockdown <Boolean>]
[-ThreatIDDefaultAction_Ids <Int64[]>]
[-ThreatIDDefaultAction_Actions <ThreatAction[]>]
[-UnknownThreatDefaultAction <ThreatAction>]
[-LowThreatDefaultAction <ThreatAction>]
[-ModerateThreatDefaultAction <ThreatAction>]
[-HighThreatDefaultAction <ThreatAction>]
[-SevereThreatDefaultAction <ThreatAction>]
[-Force]
[-DisableBlockAtFirstSeen <Boolean>]
[-PUAProtection <PUAProtectionType>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-DisableGradualRelease <Boolean>]
[-DefinitionUpdatesChannel <UpdatesChannelType>]
[-EngineUpdatesChannel <UpdatesChannelType>]
[-PlatformUpdatesChannel <UpdatesChannelType>][-CloudBlockLevel <CloudBlockLevelType>][-ServiceHealthReportInterval <UInt32>]
[-CloudBlockLevel <CloudBlockLevelType>]
[-CloudExtendedTimeout <UInt32>]
[-EnableNetworkProtection <ASRRuleActionType>]
[-EnableControlledFolderAccess <ControlledFolderAccessType>]
[-AttackSurfaceReductionOnlyExclusions <String[]>]
[-ControlledFolderAccessAllowedApplications <String[]>]
[-ControlledFolderAccessProtectedFolders <String[]>]
[-AttackSurfaceReductionRules_Ids <String[]>]
[-AttackSurfaceReductionRules_Actions <ASRRuleActionType[]>]
[-EnableLowCpuPriority <Boolean>]
[-EnableFileHashComputation <Boolean>]
[-EnableFullScanOnBatteryPower <Boolean>]
[-ProxyPacUrl <String>]
[-ProxyServer <String>]
[-ProxyBypass <String[]>]
[-ForceUseProxyOnly <Boolean>]
[-OobeEnableRtpAndSigUpdate <Boolean>]
[-DisableTlsParsing <Boolean>]
[-DisableHttpParsing <Boolean>]
[-DisableDnsParsing <Boolean>]
[-DisableFtpParsing <Boolean>]
[-DisableSmtpParsing <Boolean>]
[-DisableDnsOverTcpParsing <Boolean>]
[-DisableSshParsing <Boolean>]
[-DisableNetworkProtectionPerfTelemetry <Boolean>]
[-PlatformUpdatesChannel <UpdatesChannelType>]
[-EngineUpdatesChannel <UpdatesChannelType>]
[-SignaturesUpdatesChannel <UpdatesChannelType>]
[-DisableGradualRelease <Boolean>]
[-AllowNetworkProtectionDownLevel <Boolean>]
[-AllowDatagramProcessingOnWinServer <Boolean>]
[-EnableDnsSinkhole <Boolean>]
[-DisableInboundConnectionFiltering <Boolean>]
[-DisableRdpParsing <Boolean>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob] [<CommonParameters>]
[<CommonParameters>] Description
The Set-MpPreference cmdlet configures preferences for Windows Defender scans and updates. You can modify exclusion file name extensions, paths, or processes, and specify the default action for high, moderate, and low threat levels.
REMEDIATION VALUES
The following table provides remediation action values for detected threats at low, medium, high, and severe alert levels.
| Value | Action | |
|---|---|---|
| 1 | Clean the detected threat. | |
| 2 | Quarantine the detected threat. | |
| 3 | Remove the detected threat. | |
| 6 | Allow the detected threat. | |
| 8 | Allow the user to determine the action to take with the detected threat. | |
| 9 | Don't take any action. | |
| 10 | Block the detected threat. | |
| 0 | (NULL) | Apply action based on the Security Intelligence Update (SIU). This is the default value. |
Examples
Example 1: Schedule to check for definition updates everyday
PS C:\> Set-MpPreference -SignatureScheduleDay EverydayThis command configures preferences to check for definition updates every day.
Example 2: Schedule a time of day to check for definition updates
PS C:\> Set-MpPreference -SignatureScheduleTime 02:00:00This command configures preferences to check for definition updates 120 minutes after midnight on days when it's scheduled to check.
Parameters
-AllowDatagramProcessingOnWinServer
Specifies whether to disable inspection of UDP connections on Windows Server.
| Type: | Boolean |
| Aliases: | adpows |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowNetworkProtectionDownLevel
Specifies whether to allow network protection to be set to Enabled or Audit Mode on Windows versions before 1709.
| Type: | Boolean |
| Aliases: | anpdl |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowNetworkProtectionOnWinServer
Specifies whether to allow network protection to be set to Enabled or Audit Mode for Windows Server.
| Type: | Boolean |
| Aliases: | anpws |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AllowSwitchToAsyncInspection
Specifies whether to enable a performance optimization that allows synchronously inspected network flows to switch to async inspection once they have been checked and validated.
| Type: | Boolean |
| Position: | Named |
| Default value: | Enabled |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AttackSurfaceReductionOnlyExclusions
Specifies the files and paths to exclude from Attack Surface Reduction (ASR) rules. Specify the folders or files and resources that should be excluded from ASR rules. Enter a folder path or a fully qualified resource name. For example, ""C:\Windows"" will exclude all files in that directory. ""C:\Windows\App.exe"" will exclude only that specific file in that specific folder.
For more information about excluding files and folders from ASR rules.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AttackSurfaceReductionRules_Actions
Specifies the states of attack surface reduction rules specified by using the AttackSurfaceReductionRules_Ids parameter. If you add multiple rules as a comma-separated list, specify their states separately as a comma-separated list.
| Type: | ASRRuleActionType[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AttackSurfaceReductionRules_Ids
Specifies the states of attack surface reduction rules specified by using the AttackSurfaceReductionRules_Ids parameter. If you add multiple rules as a comma-separated list, specify their states separately as a comma-separated list.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CheckForSignaturesBeforeRunningScan
Indicates whether to check for new virus and spyware definitions before Windows Defender runs a scan. If you specify a value of $True, Windows Defender checks for new definitions. If you specify $False or don't specify a value, the scan begins with existing definitions. This setting applies to scheduled scans, but it has no effect on scans initiated manually from the user interface or on scans started from the command line using "mpcmdrun -Scan".
| Type: | Boolean |
| Aliases: | csbr |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CloudBlockLevel
Specifies a cloud block level. This value determines how aggressive Microsoft Defender Antivirus is in blocking and scanning suspicious files.
| Type: | CloudBlockLevelType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CloudExtendedTimeout
Specifies the amount of extended time to block a suspicious file and scan it in the cloud. Standard time is 10 seconds. Extend by up to 50 seconds.
| Type: | UInt32 |
| Aliases: | cloudextimeout |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ControlledFolderAccessAllowedApplications
Specifies applications that can make changes in controlled folders.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ControlledFolderAccessProtectedFolders
Specifies more folders to protect.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableArchiveScanning
Indicates whether to scan archive files, such as .zip and .cab files, for malicious and unwanted software. If you specify a value of $False or do not specify a value, Windows Defender scans archive files.
| Type: | Boolean |
| Aliases: | darchsc |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableAutoExclusions
Indicates whether to disable the Automatic Exclusions feature for the server. If you specify a value of $False or do not specify a value, Windows Defender enables the Automatic Exclusions feature for the server.
| Type: | Boolean |
| Aliases: | dae |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableBehaviorMonitoring
Indicates whether to enable behavior monitoring. If you specify a value of $False or do not specify a value, Windows Defender enables behavior monitoring.
| Type: | Boolean |
| Aliases: | dbm |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableBlockAtFirstSeen
Indicates whether to enable block at first seen. If you specify a value of $False or do not specify a value, Windows Defender enables block at first seen.
| Type: | Boolean |
| Aliases: | dbaf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableCacheMaintenance
Defines whether the cache maintenance idle task will perform the cache maintenance or not. Allowed values are 1 - cache maintenance is disabled, and 0 - cache maintenance is enabled (default).
| Type: | Boolean |
| Aliases: | dcm |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableCatchupFullScan
Indicates whether Windows Defender runs catch-up scans for scheduled full scans. A computer can miss a scheduled scan, usually because the computer is turned off at the scheduled time. If you specify a value of $False, after the computer misses two scheduled full scans, Windows Defender runs a catch-up scan the next time someone logs on to the computer. If you specify a value of $True, the computer does not run catch-up scans for scheduled full scans.
| Type: | Boolean |
| Aliases: | dcfsc |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableCatchupQuickScan
Indicates whether Windows Defender runs catch-up scans for scheduled quick scans. A computer can miss a scheduled scan, usually because the computer is off at the scheduled time. If you specify a value of $False, after the computer misses two scheduled quick scans, Windows Defender runs a catch-up scan the next time someone logs onto the computer. If you specify a value of $True, the computer does not run catch-up scans for scheduled quick scans.
| Type: | Boolean |
| Aliases: | dcqsc |
| Position: | Named |
| Default value: | True |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableCpuThrottleOnIdleScans
Indicates whether the CPU will be throttled for scheduled scans while the device is idle. This parameter is enabled by default, thus ensuring that the CPU won't be throttled for scheduled scans performed when the device is idle, regardless of what ScanAvgCPULoadFactor is set to. For all other scheduled scans, this flag does not have any impact and normal throttling will occur.
| Type: | Boolean |
| Aliases: | None |
| Position: | Named |
| Default value: | True |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableDatagramProcessing
Specifies whether to disable inspection of UDP connections.
| Type: | Boolean |
| Aliases: | ddtgp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableDnsOverTcpParsing
Specifies whether to disable inspection of DNS traffic that occurs over a TCP channel.
| Type: | Boolean |
| Aliases: | ddnstcpp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableDnsParsing
Specifies whether to disable inspection of DNS traffic that occurs over a UDP channel. Network protection inspects DNS traffic that occurs over a TCP channel to provide metadata for anti-malware behavior monitoring or to allow for DNS sink holing if the "-EnableDnsSinkhole" configuration is set. This can be disabled by setting this value to "$true".
| Type: | Boolean |
| Aliases: | ddnsp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableEmailScanning
Indicates whether Windows Defender parses the mailbox and mail files, according to their specific format, in order to analyze mail bodies and attachments. Windows Defender supports several formats, including .pst, .dbx, .mbx, .mime, and .binhex. If you specify a value of $False or do not specify a value, Windows Defender performs email scanning. If you specify a value of $True, Windows Defender does not perform email scanning.
| Type: | Boolean |
| Aliases: | demsc |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableFtpParsing
Specifies whether to disable FTP parsing for network protection.
| Type: | Boolean |
| Aliases: | dfp |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableGradualRelease
Specifies whether to disable gradual rollout of monthly and daily Windows Defender updates. If you enable this option, devices are offered all updates after the gradual release cycle finishes. Consider this option for datacenter computers that only receive limited updates.
This setting applies to both monthly and daily updates. It overrides configured channel selections for platform and engine updates.
If you disable or do not configure this policy, the device remains in Current Channel (Default) unless specified otherwise in specific channels. The device stays up to date automatically during the gradual release cycle, which is suitable for most devices.
This policy is available starting with platform version 4.18.2106.5 and later.
| Type: | Boolean |
| Aliases: | dgr |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableHttpParsing
Specifies whether disable inspection of HTTP traffic.
If EnableNetworkProtection has the value Enabled, HTTP connections to malicious websites can be blocked.
| Type: | Boolean |
| Aliases: | dhttpp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableInboundConnectionFiltering
Specifies whether to inspect only outbound connections. By default, Network Protection inspects both inbound and outbound connections.
| Type: | Boolean |
| Aliases: | dicf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableIOAVProtection
Indicates whether Windows Defender scans all downloaded files and attachments. If you specify a value of $False or do not specify a value, scanning downloaded files and attachments is enabled.
| Type: | Boolean |
| Aliases: | dioavp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableNetworkProtectionPerfTelemetry
This setting disables the gathering and sending of performance telemetry from network protection. The accepted values are 0 and 1.
- 1- Network protection telemetry is disabled.
- 0 (Default) - Network protection telemetry is enabled.
| Type: | Boolean |
| Aliases: | dnpp |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisablePrivacyMode
This is a legacy setting that does not have any affect on current platforms. The intent of this parameter was to disable privacy mode, which prevented users, other than administrators, from displaying threat history. When this parameter was in use, if you specified a value of $False or did not specify a value, privacy mode was enabled.
| Type: | Boolean |
| Aliases: | dpm |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableRdpParsing
This setting controls whether to parse RDP traffic to look for malicious attacks using the RDP protocol.
| Type: | Boolean |
| Aliases: | drdpp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableRealtimeMonitoring
Indicates whether to use real-time protection. If you specify a value of $False or do not specify a value, Windows Defender uses real-time protection. We recommend that you enable Windows Defender to use real-time protection.
| Type: | Boolean |
| Aliases: | drtm |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableRemovableDriveScanning
Indicates whether to scan for malicious and unwanted software in removable drives, such as flash drives, during a full scan. If you specify a value of $False or do not specify a value, Windows Defender scans removable drives during any type of scan. If you specify a value of $True, Windows Defender does not scan removable drives during a full scan. Windows Defender can still scan removable drives during quick scans or custom scans.
| Type: | Boolean |
| Aliases: | drdsc |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableRestorePoint
Indicates whether to disable scanning of restore points. If you specify a value of $False or do not specify a value, Windows Defender restore point is enabled.
| Type: | Boolean |
| Aliases: | drp, dsnf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableScanningMappedNetworkDrivesForFullScan
Indicates whether to scan mapped network drives. If you specify a value of $False or do not specify a value, Windows Defender scans mapped network drives. If you specify a value of $True, Windows Defender does not scan mapped network drives.
| Type: | Boolean |
| Aliases: | dsmndfsc |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableScanningNetworkFiles
Indicates whether to scan for network files. If you specify a value of $False or do not specify a value, Windows Defender scans network files. If you specify a value of $True, Windows Defender does not scan network files.
| Type: | Boolean |
| Aliases: | dsnf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableScriptScanning
Specifies whether to disable the scanning of scripts during malware scans. If you specify a value of $False or do not specify a value, Windows Defender does not scan scripts.
| Type: | Boolean |
| Aliases: | dscrptsc |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableSmtpParsing
This setting disables SMTP parsing for network protection. The accepted values are 0 and 1.
- 1 - SMTP parsing is disabled.
- 0 (Default) - SMTP parsing is enabled.
| Type: | Boolean |
| Aliases: | dsp |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableSshParsing
Specifies whether to disable inspection of SSH traffic. By default, Network Protection inspects SSH traffic.
| Type: | Boolean |
| Aliases: | dsshp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableTlsParsing
Specifies whether to disable inspection of TLS traffic. Network protection inspects TLS traffic (also known as HTTPS traffic) to see if a connection is being made to a malicious website, and to provide metadata to behavior monitoring. TLS connections to malicious websites can also be blocked if "-EnableNetworkProtection" is set to enabled. HTTP inspection can be disabled by setting this value to "$true". By default, network protection inspects TLS traffic.
| Type: | Boolean |
| Aliases: | dtlsp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableControlledFolderAccess
Specifies the state for the controlled folder access feature. Valid values are Disabled, Enabled, and Audit Mode.
| Type: | ControlledFolderAccessType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableDnsSinkhole
Specifies whether to examine DNS traffic to detect and sinkhole DNS exfiltration attempts and other DNS based malicious attacks. Network protection can inspect the DNS traffic of a machine and, in conjunction with behavior monitoring, detect and sink hole DNS exfiltration attempts, and other DNS based malicious attacks. Set this configuration to "$true" to enable this feature.
| Type: | Boolean |
| Aliases: | ednss |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableFileHashComputation
Specifies whether to enable file hash computation. When this feature is enabled, Windows Defender computes hashes for files it scans.
| Type: | Boolean |
| Aliases: | efhc |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableFullScanOnBatteryPower
Specifies whether Windows Defender does a full scan while on battery power.
| Type: | Boolean |
| Aliases: | efsobp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableLowCpuPriority
Specifies whether Windows Defender uses low CPU priority for scheduled scans.
| Type: | Boolean |
| Aliases: | elcp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableNetworkProtection
Specifies how the network protection service handles web-based malicious threats, including phishing and malware. Possible values are Disabled, Enabled, and AuditMode.
| Type: | ASRRuleActionType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EngineUpdatesChannel
Specifies when devices receive Microsoft Defender engine updates during the monthly gradual rollout.
Valid values are:
- NotConfigured. Devices stay up to date automatically during the gradual release cycle. This value is suitable for most devices.
- Beta. Devices are the first to receive new updates. Select Beta Channel to participate in identifying and reporting issues to Microsoft. Devices in the Windows Insider Program are subscribed to this channel by default. This value is for use in manual test environments only and a limited number of devices.
- Broad. Devices are offered updates only after the gradual release cycle completes. This value is suggested for a broad set of devices in your production population, from 10 to 100 percent.
- Preview. Devices are offered updates earliest during the monthly gradual release cycle. This value is suggested for pre-production or validation environments.
- Staged. Devices are offered updates after the monthly gradual release cycle. This value is suggested for a small, representative part of your production population, around 10 percent.
| Type: | UpdatesChannelType |
| Aliases: | erelr |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ExclusionExtension
Specifies an array of file name extensions, such as obj or lib, to exclude from scheduled, custom, and real-time scanning.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ExclusionIpAddress
Specifies an array of IP addresses to exclude from scheduled and real-time scanning.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ExclusionPath
Specifies an array of file paths to exclude from scheduled and real-time scanning. You can specify a folder to exclude all the files under the folder.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ExclusionProcess
Specifies an array of processes, as paths to process images. This cmdlet excludes any files opened by the processes that you specify from scheduled and real-time scanning. Specifying this parameter excludes files opened by executable programs only. The cmdlet does not exclude the processes themselves. To exclude a process, specify it by using the ExclusionPath parameter.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Force
Forces the command to run without asking for user confirmation.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceUseProxyOnly
Specifies whether to force the device to use only the proxy.
| Type: | Boolean |
| Aliases: | fupo |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-HighThreatDefaultAction
Specifies which automatic remediation action to take for a high level threat. The acceptable values for this parameter are:
- Quarantine
- Remove
- Ignore
| Type: | ThreatAction |
| Aliases: | htdefac |
| Accepted values: | Clean, Quarantine, Remove, Allow, UserDefined, NoAction, Block |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IntelTDTEnabled
This policy setting configures the Intel TDT integration level for Intel TDT-capable devices. The acceptable values for this parameter are:
- 0 (Default) - If you don't configure this setting, the default value will be applied. The default value is controlled by Microsoft security intelligence updates. Microsoft will enable Intel TDT if there is a known threat.
- 1 - If you configure this setting to enabled, Intel TDT integration will turn on.
- 2 - If you configure this setting to disabled, Intel TDT integration will turn off.
| Type: | UInt32 |
| Aliases: | itdte |
| Accepted values: | 0, 1 and 2 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LowThreatDefaultAction
Specifies which automatic remediation action to take for a low level threat. The acceptable values for this parameter are:
- Quarantine
- Remove
- Ignore
| Type: | ThreatAction |
| Aliases: | ltdefac |
| Accepted values: | Clean, Quarantine, Remove, Allow, UserDefined, NoAction, Block |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MAPSReporting
Specifies the type of membership in Microsoft Active Protection Service. Microsoft Active Protection Service is an online community that helps you choose how to respond to potential threats. The community also helps prevent the spread of new malicious software. The acceptable values for this parameter are:
- 0: Disabled. Send no information to Microsoft. This is the default value.
- 1: Basic membership. Send basic information to Microsoft about detected software, including where the software came from, the actions that you apply or that apply automatically, and whether the actions succeeded.
- 2: Advanced membership. In addition to basic information, send more information to Microsoft about malicious software, spyware, and potentially unwanted software, including the location of the software, file names, how the software operates, and how it affects your computer.
If you join this community, you can choose to automatically send basic or additional information about detected software. Additional information helps Microsoft create new definitions. In some instances, personal information might unintentionally be sent to Microsoft. However, Microsoft will not use this information to identify you or contact you.
| Type: | MAPSReportingType |
| Accepted values: | Disabled, Basic, Advanced |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MeteredConnectionUpdates
Specifies whether to update managed devices to update through metered connections. Data charges may apply.
| Type: | Boolean |
| Aliases: | mcupd |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ModerateThreatDefaultAction
Specifies which automatic remediation action to take for a moderate level threat. The acceptable values for this parameter are:
- Quarantine
- Remove
- Ignore
| Type: | ThreatAction |
| Aliases: | mtdefac |
| Accepted values: | Clean, Quarantine, Remove, Allow, UserDefined, NoAction, Block |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OobeEnableRtpAndSigUpdate
This setting allows you to configure whether real-time protection and Security Intelligence Updates are enabled during Out of Box experience (OOBE).
Valid values are:
- True - If you enable this setting, real-time protection and Security Intelligence Updates are enabled during OOBE.
- False (Default) - If you either disable or don't configure this setting, real-time protection and Security Intelligence Updates during OOBE aren't enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PlatformUpdatesChannel
Specifies when devices receive Microsoft Defender platform updates during the monthly gradual rollout.
Valid values are:
- NotConfigured. Devices stay up to date automatically during the gradual release cycle. This value is suitable for most devices.
- Beta. Devices are the first to receive new updates. Select Beta Channel to participate in identifying and reporting issues to Microsoft. Devices in the Windows Insider Program are subscribed to this channel by default. This value is for use in manual test environments only and a limited number of devices.
- Broad. Devices are offered updates only after the gradual release cycle completes. This value is suggested for a broad set of devices in your production population, from 10 to 100 percent.
- Preview. Devices are offered updates earliest during the monthly gradual release cycle. This value is suggested for pre-production or validation environments.
- Staged. Devices are offered updates after the monthly gradual release cycle. This value is suggested for a small, representative part of your production population, around 10 percent.
| Type: | UpdatesChannelType |
| Aliases: | prelr |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ProxyBypass
Specifies proxy bypasses.
| Type: | String[] |
| Aliases: | proxbps |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ProxyPacUrl
Specifies the Privilege Attribute Certificate (PAC) proxy.
| Type: | String |
| Aliases: | ppurl |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ProxyServer
Specifies the proxy server.
| Type: | String |
| Aliases: | proxsrv |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PUAProtection
Specifies the level of detection for potentially unwanted applications. When potentially unwanted software is downloaded or attempts to install itself on your computer, you are warned.
| Type: | PUAProtectionType |
| Accepted values: | Disabled, Enabled, AuditMode |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-QuarantinePurgeItemsAfterDelay
Specifies the number of days to keep items in the Quarantine folder. If you specify a value of zero or do not specify a value for this parameter, items stay in the Quarantine folder indefinitely.
| Type: | UInt32 |
| Aliases: | qpiad |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RandomizeScheduleTaskTimes
Indicates whether to select a random time for the scheduled start and scheduled update for definitions. If you specify a value of $True or do not specify a value, scheduled tasks begin within 30 minutes, before or after, the scheduled time. If you randomize the start times, it can distribute the impact of scanning. For example, if several virtual machines share the same host, randomized start times prevents all the hosts from starting the scheduled tasks at the same time.
| Type: | Boolean |
| Aliases: | rstt |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RealTimeScanDirection
Specifies scanning configuration for incoming and outgoing files on NTFS volumes. The acceptable values for this parameter are:
- 0: Scan both incoming and outgoing files. This is the default.
- 1: Scan incoming files only.
- 2: Scan outgoing files only.
Specify a value for this parameter to enhance performance on servers which have a large number of file transfers, but need scanning for either incoming or outgoing files. Evaluate this configuration based on the server role. For non-NTFS volumes, Windows Defender performs full monitoring of file and program activity.
| Type: | ScanDirection |
| Aliases: | rtsd |
| Accepted values: | Both, Incoming, Outcoming |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemediationScheduleDay
Specifies the day of the week on which to perform a scheduled full scan in order to complete remediation. Alternatively, specify everyday for this full scan or never. The acceptable values for this parameter are:
- 0: Everyday
- 1: Sunday
- 2: Monday
- 3: Tuesday
- 4: Wednesday
- 5: Thursday
- 6: Friday
- 7: Saturday
- 8: Never
The default value is 8, never. If you specify a value of 8 or do not specify a value, Windows Defender performs a scheduled full scan to complete remediation by using a default frequency.
| Type: | Day |
| Aliases: | rsd |
| Accepted values: | Everyday, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Never |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemediationScheduleTime
Specifies the time of day, as the number of minutes after midnight, to perform a scheduled scan. The time refers to the local time on the computer. If you do not specify a value for this parameter, a scheduled scan runs at the default time of two hours after midnight.
| Type: | DateTime |
| Aliases: | rst |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ReportingAdditionalActionTimeOut
Specifies the number of minutes before a detection in the additional action state changes to the cleared state.
| Type: | UInt32 |
| Aliases: | raat |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ReportingCriticalFailureTimeOut
Specifies the number of minutes before a detection in the critically failed state changes to either the additional action state or the cleared state.
| Type: | UInt32 |
| Aliases: | rcto |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ReportingNonCriticalTimeOut
Specifies the number of minutes before a detection in the non-critically failed state changes to the cleared state.
| Type: | UInt32 |
| Aliases: | rncto |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScanAvgCPULoadFactor
Specifies the maximum percentage CPU usage for a scan. The acceptable values for this parameter are: integers from 5 through 100, and the value 0, which disables CPU throttling. Windows Defender does not exceed the percentage of CPU usage that you specify. The default value is 50.
Note: This is not a hard limit but rather a guidance for the scanning engine to not exceed this maximum on average. If ScanOnlyIfIdleEnabled (instructing the product to scan only when the computer is not in use) and DisableCpuThrottleOnIdleScans (instructing the product to disable CPU throttling on idle scans) are both enabled, then the value of ScanAvgCPULoadFactor is ignored.
| Type: | Byte |
| Aliases: | saclf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScanOnlyIfIdleEnabled
Indicates whether to start scheduled scans only when the computer is not in use. If you specify a value of $True or do not specify a value, Windows Defender runs schedules scans when the computer is on, but not in use.
| Type: | Boolean |
| Aliases: | soiie |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScanParameters
Specifies the scan type to use during a scheduled scan. The acceptable values for this parameter are:
- 1: Quick scan
- 2: Full scan
If you do not specify this parameter, Windows Defender uses the default value of quick scan.
| Type: | ScanType |
| Accepted values: | QuickScan, FullScan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScanPurgeItemsAfterDelay
Specifies the number of days to keep items in the scan history folder. After this time, Windows Defender removes the items. If you specify a value of zero, Windows Defender does not remove items. If you do not specify a value, Windows Defender removes items from the scan history folder after the default length of time, which is 15 days.
| Type: | UInt32 |
| Aliases: | spiad |
| Position: | Named |
| Default value: | 15 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScanScheduleDay
Specifies the day of the week on which to perform a scheduled scan. Alternatively, specify everyday for a scheduled scan or never. The acceptable values for this parameter are:
- 0: Everyday
- 1: Sunday
- 2: Monday
- 3: Tuesday
- 4: Wednesday
- 5: Thursday
- 6: Friday
- 7: Saturday
- 8: Never
The default value is 8, never. If you specify a value of 8 or do not specify a value, Windows Defender does not perform scheduled scans.
| Type: | Day |
| Aliases: | scsd |
| Accepted values: | Everyday, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Never |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScanScheduleOffset
Configures the number of minutes after midnight to perform a scheduled scan. The time on the endpoint is used to determine the local time. If you enable this setting, a scheduled scan will run at the time specified. If you disable or don’t enable this setting, a scheduled scan runs at the default time of two hours (120 minutes) after midnight.
| Type: | UInt32 |
| Aliases: | scso |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScanScheduleQuickScanTime
Specifies the time of day, as the number of minutes after midnight, to perform a scheduled quick scan. The time refers to the local time on the computer. If you do not specify a value for this parameter, a scheduled quick scan runs at the time specified by the ScanScheduleOffset parameter. That parameter has a default time of two hours after midnight.
| Type: | DateTime |
| Aliases: | scsqst |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScanScheduleTime
Specifies the time of day to run a scheduled scan. The time refers to the local time on the computer. Specify the number of minutes after midnight (for example, enter 60 for 1 a.m.). This parameter has a default time of two hours after midnight (2 a.m.).
| Type: | DateTime |
| Aliases: | scsqst |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SchedulerRandomizationTime
Specifies the randomization time for the scheduler.
| Type: | UInt32 |
| Aliases: | srt |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServiceHealthReportInterval
This policy setting configures the time interval (in minutes) for the service health reports to be sent from endpoints. These are for Microsoft Defender Antivirus events 1150 and 1151. For more information, see Microsoft Defender Antivirus event IDs.
If you do not configure this setting, the default value will be applied. The default value is set at 60 minutes (one hour). If you configure this setting to 0, no service health reports will be sent. The maximum value allowed to be set is 14400 minutes (ten days).
| Type: | UInt32 |
| Aliases: | shri |
| Accepted values: | 0-14400 |
| Position: | Named |
| Default value: | 60 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SevereThreatDefaultAction
Specifies which automatic remediation action to take for a severe level threat. The acceptable values for this parameter are:
- Quarantine
- Remove
- Ignore
| Type: | ThreatAction |
| Aliases: | stdefac |
| Accepted values: | Clean, Quarantine, Remove, Allow, UserDefined, NoAction, Block |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SharedSignaturesPath
Specifies the shared signatures path.
| Type: | String |
| Aliases: | ssp, SecurityIntelligenceLocation, ssl |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureAuGracePeriod
Specifies a grace period, in minutes, for the definition. If a definition successfully updates within this period, Windows Defender abandons any service initiated updates.
| Type: | UInt32 |
| Aliases: | sigagp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureBlobFileSharesSources
Specifies the file shares sources for signatures.
| Type: | String |
| Aliases: | sigbfs |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureBlobUpdateInterval
Specifies the signature update interval.
| Type: | UInt32 |
| Aliases: | sigbui |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureDefinitionUpdateFileSharesSources
Specifies file-share sources for definition updates. Specify sources as a bracketed sequence of Universal Naming Convention (UNC) locations, separated by the pipeline symbol; for example, { \\Server01\Share01 | \\Server02\Share02 | \\Server03\Share03}. If you specify a value for this parameter, Windows Defender attempts to connect to the shares in the order that you specify. After Windows Defender updates a definition, it stops attempting to connect to shares on the list. If you do not specify a value for this parameter, the list is empty.
| Type: | String |
| Aliases: | sigdufss |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureDisableUpdateOnStartupWithoutEngine
Indicates whether to initiate definition updates even if no antimalware engine is present. If you specify a value of $True or do not specify a value, Windows Defender does not initiate definition updates on startup. If you specify a value of $False, and if no antimalware engine is present, Windows Defender initiates definition updates on startup.
| Type: | Boolean |
| Aliases: | sigduoswo |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureFallbackOrder
Specifies the order in which to contact different definition update sources. Specify the types of update sources in the order in which you want Windows Defender to contact them, enclosed in braces and separated by the pipeline symbol; for example, { InternalDefinitionUpdateServer | MicrosoftUpdateServer | MMPC }. The values that you can specify in the string are:
- InternalDefinitionUpdateServer
- MicrosoftUpdateServer
- MMPC
- FileShares
MMPC refers to Microsoft Malware Protection Center.
If you specify a value for this parameter, Windows Defender contacts the definition update sources in the specified order. After Windows Defender downloads definition updates from a source, it stops attempting to connect to other sources. If you do not specify a value for this parameter, Windows Defender contacts sources in the default order of { MicrosoftUpdateServer | MMPC }.
| Type: | String |
| Aliases: | sfo |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureFirstAuGracePeriod
Specifies a grace period, in minutes, for the definition. If a definition successfully updates within this period, Windows Defender abandons any service initiated updates. This parameter overrides the value of the CheckForSignaturesBeforeRunningScan parameter.
| Type: | UInt32 |
| Aliases: | sigfagp |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureScheduleDay
Specifies the day of the week on which to check for definition updates. Alternatively, specify everyday for a scheduled scan or never. The acceptable values for this parameter are:
- 0: Everyday
- 1: Sunday
- 2: Monday
- 3: Tuesday
- 4: Wednesday
- 5: Thursday
- 6: Friday
- 7: Saturday
- 8: Never
The default value is 8, never. If you specify a value of 8 or do not specify a value, Windows Defender checks for definition updates by using a default frequency.
| Type: | Day |
| Aliases: | sigsd |
| Accepted values: | Everyday, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Never |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureScheduleTime
Specifies the time of day, as the number of minutes after midnight, to check for definition updates. The time refers to the local time on the computer. If you do not specify a value for this parameter, Windows Defender checks for definition updates at the default time of 15 minutes before the scheduled scan time.
| Type: | DateTime |
| Aliases: | sigst |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignaturesUpdatesChannel
Specifies when devices receive daily Microsoft Defender definition updates during the monthly gradual rollout.
Valid values are:
- NotConfigured. Devices stay up to date automatically during the gradual release cycle. This value is suitable for most devices.
- Broad. Devices are offered updates only after the gradual release cycle completes. This value is suggested for a broad set of devices in your production population, from 10 to 100 percent.
- Staged. Devices are offered updates after the monthly gradual release cycle. This value is suggested for a small, representative part of your production population, around 10 percent.
This parameter name will be updated to DefinitionUpdatesChannel in a future release.
| Type: | UpdatesChannelType |
| Aliases: | srelr |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureUpdateCatchupInterval
Specifies the number of days after which Windows Defender requires a catch-up definition update. If you do not specify a value for this parameter, Windows Defender requires a catch-up definition update after the default value of one day.
| Type: | UInt32 |
| Aliases: | siguci |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SignatureUpdateInterval
Specifies the interval, in hours, at which to check for definition updates. The acceptable values for this parameter are: integers from 1 through 24. If you do not specify a value for this parameter, Windows Defender checks at the default interval. You can use this parameter instead of the SignatureScheduleDay parameter and SignatureScheduleTime parameter.
| Type: | UInt32 |
| Aliases: | sigui |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SubmitSamplesConsent
Specifies how Windows Defender checks for user consent for certain samples. If consent has previously been granted, Windows Defender submits the samples. Otherwise, if the MAPSReporting parameter does not have a value of Disabled, Windows Defender prompts the user for consent. The acceptable values for this parameter are:
- 0: Always prompt
- 1: Send safe samples automatically
- 2: Never send
- 3: Send all samples automatically
| Type: | SubmitSamplesConsentType |
| Accepted values: | AlwaysPrompt, SendSafeSamples, NeverSend, SendAllSamples |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThreatIDDefaultAction_Actions
Specifies an array of the actions to take for the IDs specified by using the ThreatIDDefaultAction_Ids parameter. The acceptable values for this parameter are:
- 1: Clean
- 2: Quarantine
- 3: Remove
- 6: Allow
- 8: UserDefined
- 9: NoAction
- 10: Block
Note
A value of 0 (NULL) applies an action based on the Security Intelligence Update (SIU). This is the default value.
| Type: | ThreatAction[] |
| Aliases: | tiddefaca |
| Accepted values: | Clean, Quarantine, Remove, Allow, UserDefined, NoAction, Block |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThreatIDDefaultAction_Ids
Specifies an array of threat IDs. This cmdlet modifies the default action for the threat IDs that you specify.
| Type: | Int64[] |
| Aliases: | tiddefaci |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleForScheduledScanOnly
A CPU usage limit can be applied to scheduled scans only, or to scheduled and custom scans. The default value applies a CPU usage limit to scheduled scans only. The acceptable values for this parameter are:
- 1 (Default) - If you enable this setting, CPU throttling will apply only to scheduled scans.
- 0 - If you disable this setting, CPU throttling will apply to scheduled and custom scans.
| Type: | Boolean |
| Position: | Named |
| Default value: | 1 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UILockdown
Indicates whether to disable UI lockdown mode. If you specify a value of $True, Windows Defender disables UI lockdown mode. If you specify $False or do not specify a value, UI lockdown mode is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UnknownThreatDefaultAction
Specifies which automatic remediation action to take for an unknown level threat. The acceptable values for this parameter are:
- Quarantine
- Remove
- Ignore
| Type: | ThreatAction |
| Aliases: | unktdefac |
| Accepted values: | Clean, Quarantine, Remove, Allow, UserDefined, NoAction, Block |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |