共用方式為

！usbkd.hub2_info_from_fdo

  • 發行項

！usbkd.hub2_info_from_fdo 命令會顯示USB中樞的相關信息。

!usbkd.hub2_info_from_fdo FDO

參數

FDO
USB 中樞的功能裝置物件 （FDO） 位址。

DLL

Usbkd.dll

範例

以下是尋找 USB 中樞之 FDO 位址的其中一種方式。 首先輸入 ！usbkd.usb2tree。

0: kd> !usbkd.usb2tree
...
2)!ehci_info ffffe00001ca11a0 !devobj ffffe00001ca1050 PCI: VendorId 8086 DeviceId 293c RevisionId 0002 
    RootHub !hub2_info ffffe000023201a0 !devstack ffffe00002320050

在上述輸出中，中樞的 FDO 位址會顯示為建議命令 ！devstack ffffe00002320050 的自變數。

現在，將 FDO 的地址傳遞至 ！hub2_info_from_fdo 命令。

0: kd> !usbkd.hub2_info_from_fdo ffffe00002320050
usbhubext
*****************************************************************************

FDO ffffe00002320050 PDO ffffe0000213c050 HubNumber# 3
dt USBHUB!_DEVICE_EXTENSION_HUB ffffe000023201a0
!usbhublog ffffe000023201a0
RemoveLock ffffe00002320668
FdoFlags ffffe00002320ba0

CurrentPowerIrp: System (0000000000000000) Device (0000000000000000)

ObjReferenceList: !usblist ffffe00002320b70, RL 
ExceptionList: !usblist ffffe00002321498, EL [Empty]
DmTimerListHead: !usblist ffffe00002321040, TL [Empty]
PdoRemovedListHead: !usblist ffffe00002321478, PL [Empty]
PdoPresentListHead: !usblist ffffe00002321468, PL 
WorkItemListHead: !usblist ffffe00002320c80, WI [Empty]
SshBusyListHead: !usblist ffffe00002320dc0, BL 


## PnP FUNC HISTORY (latest at bottom)

01. IRP_MN_QUERY_DEVICE_RELATIONS
...

## POWER FUNC HISTORY (latest at bottom)

01. IRP_MN_QUERY_POWER    - PowerSystemHibernate
...

## HARD RESET STATE HISTORY (latest at bottom)

##     EVENT                           STATE                                   NEXT

01. HRE_Pause                       HReset_WaitReady                        HReset_Paused                           
...

## PNP STATE HISTORY (latest at bottom)

##     EVENT                           STATE                                   NEXT

01. Ev_SYSTEM_POWER                 FDO_WaitPnpStop                         FDO_WaitPnpStop                         
...

## POWER STATE HISTORY (latest at bottom)

##     EVENT                           STATE                                   NEXT

01. Ev_SET_POWER_S0                 FdoSx_Dx                                FdoWaitS0IoComplete_Dx                  
...

## BUS STATE HISTORY (latest at bottom)

##     EVENT                           STATE                                   NEXT

01. BE_BusSuspend                   BS_BusPause                             BS_BusSuspend                           
...

SSH_EnabledStatus: [SSH_ENABLED_VIA_POWER_POLICY]

## SSH STATE HISTORY (latest at bottom)

##     EVENT                           STATE                                   NEXT

01. SSH_Event_ResumeHubComplete     SSH_State_HubPendingResume              SSH_State_HubActive                     
...

## PORT DATA

PortData 1: !port2_info ffffe000021bf000 Port State = PS_WAIT_CONNECT PortChangeLock: 0, Pcq_State: Pcq_Run_Idle             
     PDO 0000000000000000 
...

另請參閱

USB 2.0 調試程式擴充功能

通用序列總線 （USB） 驅動程式