共用方式為

Walkthrough: Build a Simple Answer File for Itanium-Based Computers

  • 發行項

This walkthrough describes how to build a simple answer file for Itanium-based computers. Because Itanium based computers are installed to GUID Partition Table (GPT) disks, additional partitions are required during installation.

This walkthrough describes how to create a simple answer that performs a complete unattended installation of Windows. This example does not import any special drivers, applications, or packages. At the end of this walkthrough, you can run Windows Setup with this answer file to complete an unattended installation.

For more information about EFI-based computers, see Deploy to UEFI-based Computers.

Prerequisites

To complete this walkthrough, you need the following:

  • Windows System Image Manager (Windows SIM) installed on a technician computer. For more information, see Building a Technician Computer.
  • An authorized copy of the Windows Server® 2008 for Itanium-Based Systems product DVD.
  • Removable media, such as a floppy disk or USB flash drive (UFD).
  • An Itanium-based computer with a GPT hard disk.

Step 1: Create a new answer file

In this step, you create a new, blank answer file. A catalog file (.clg) is a binary file that contains the state of all the settings and packages in a Windows image.

  1. On your technician computer, insert the Windows Server 2008 for Itanium-Based Systems product DVD into the DVD-ROM drive.
  2. On the desktop of the technician computer, navigate to the \Sources folder on your DVD-ROM drive. Copy the catalog file (.clg) that corresponds to the Windows edition you want to create an answer file for to a location on the computer.
  3. Open Windows SIM. On the desktop of the computer, click Start, point to Programs, point to Microsoft Windows OPK (or Windows AIK), and then click Windows System Image Manager.
  4. On the File menu, click Select Windows Image.
  5. In the Select a Windows Image window, in Files of type, click Catalog files (.clg).
  6. In Select a Windows Image, navigate to the location where you saved the catalog file (.clg), and then click Open.
    The Windows Server 2008 for Itanium-Based Systems component list appears in the Windows Image pane.
  7. On the File menu, click New Answer File.

Step 2: Add Windows Settings to the Answer File

In this step, you add the settings to your answer file to enable an unattended installation.

  1. In the Windows Image pane of Windows SIM, expand the Components node to display available settings.
    64-bit versions of Windows contain multiple architecture types of the same component. For Itanium-based computers, use the ia64 versions of the components in the Windows image.

  2. On the expanded list of components, add the following components to your answer file by right-clicking the component and then selecting the appropriate configuration pass.
    This action adds the component to your answer file in the specified configuration pass. A configuration pass is a phase of Windows installation. Different parts of the Windows Vista operating system are installed in different configuration passes. You can specify settings to be applied in one or more configuration passes.

Component Configuration Pass

ia64_Microsoft-Windows-Setup\DiskConfiguration\Disk\CreatePartitions\CreatePartition

windowsPE

ia64_Microsoft-Windows-Setup\ImageInstall\OSImage\InstallTo

windowsPE

ia64_Microsoft-Windows-Setup\UserData

windowsPE

ia64_Microsoft-Windows-International-Core-WinPE

windowsPE

ia64_Microsoft-Windows-Shell-Setup\OEMInformation

specialize

ia64_Microsoft-Windows-Shell-Setup\AutoLogon

specialize

ia64_Microsoft-Windows-Shell-Setup\UserAccounts\AdministratorPassword

oobeSystem

Note

Expand the component list until you see the lowest setting listed above, and then add that setting to your answer file. This shortcut will add the setting and all parent settings to your answer file in one step.

Step 3: Configure the Windows Settings in the Answer File

In this step, you configure the Windows settings in the answer file for Itanium-based computers.

  1. In the answer file pane, in the Microsoft-Windows-Setup component, click Disk.

  2. In the Disk node, configure the following settings:

Setting Value

Microsoft-Windows-Setup/DiskConfiguration/Disk

DiskID=0

WillWipeDisk=true

  1. In the Microsoft-Windows-Setup component, right-click CreatePartitions, and then select Insert New CreatePartition. Repeat this step two more times so that there are three CreatePartition entries in your answer file.

  2. In the CreatePartition nodes. configure the following settings:

Setting Value

Microsoft-Windows-Setup/DiskConfiguration/Disk/CreatePartitions/CreatePartition

Order=1

Size=200

Type=EFI

Microsoft-Windows-Setup/DiskConfiguration/Disk/CreatePartitions/CreatePartition

Order=2

Size=128

Type=MSR

Microsoft-Windows-Setup/DiskConfiguration/Disk/CreatePartitions/CreatePartition

Extend=true

Order=3

Type=Primary
The first `CreatePartition` setting creates the UEFI System Partition. The second `CreatePartion` creates the MSR, and the third `CreatePartition` setting creates the partition for Windows. Because the value for **Extend** is `true`, the remainder of the disk is used for the Windows partition.
  1. Select and configure all other settings in the answer file as specified:
Component Value

ia64_Microsoft-Windows-International-Core-WinPE

InputLocale = <Input Locale>

SystemLocale = <System Locale>

UILanguage = <UI Language>

UserLocale = <User Locale>

ia64_Microsoft-Windows-International-Core-WinPE\SetupUILanguage

UILanguage = <UI Language>

ia64_Microsoft-Windows-Setup\ImageInstall\OSImage\

WillShowUI = OnError

ia64_Microsoft-Windows-Setup\ImageInstall\OSImage\InstallTo

DiskID = 0

PartitionID = 3

ia64_Microsoft-Windows-Setup \UserData

AcceptEula = true

ia64_Microsoft-Windows-Setup \UserData\ProductKey

Key = <product key>

WillShowUI = OnError

ia64_Microsoft-Windows-Shell-Setup \OEMInformation

Manufacturer = <company name>

HelpCustomized = false

SupportPhone = <support number>

SupportURL = <support URL>

SupportHours = <support hours>

ia64_Microsoft-Windows-Shell-Setup\AutoLogon

Enabled = true

LogonCount = 5

Username = Administrator

ia64_Microsoft-Windows-Shell-Setup\AutoLogon\Password

Value = <admin password>

ia64_Microsoft-Windows-Shell-Setup

ComputerName = <computer name>

ia64_Microsoft-Windows-Shell-Setup\UserAccounts

AdministratorPassword = <admin password>

These settings outline a basic unattended installation; no user input is required during Windows Setup. You can perform additional customizations and configurations, install Server Roles, or additional drivers. When complete, OEMs and System Builders are required to run sysprep /oobe which will prompt the end user to read the Microsoft Software License Terms.

For a complete summary of requirements, see the topics in the OEM Customization Guidelines.

For information about Sysprep.exe, see Sysprep Technical Reference.

Step 4: Validate the answer file

In this step, you validate the settings in your answer file and then save them to a file.

  1. In Windows SIM, click Tools, and then click Validate Answer File.
    The setting values in the answer file are compared with the available settings in the Windows image.

Note

This sample answer file contains a blank administrator password. Blank administrator passwords are potential security risks.

  1. If the answer file validates successfully, a “success” message appears in the Messages pane. Otherwise, error messages appear in the same location.
  2. If an error occurs, double-click the error in the Messages pane to navigate to the incorrect setting. Change the setting to fix the error, and then revalidate.
  3. On the File menu, click Save Answer File, and then save the answer file as Autounattend.xml.
  4. Copy Autounattend.xml to the root of a floppy disk or UFD.

Next Step

You now have a basic answer file that automates Windows Setup for Itanium-based computers. To test your answer file, use the DVD-boot method to install Windows Server 2008 with an answer file. For more information, see Walkthrough: Deploy Windows by Booting from a DVD.

Sample

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-Setup" processorArchitecture="ia64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="https://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DiskConfiguration>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Order>1</Order>
                            <Size>200</Size>
                            <Type>EFI</Type>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>2</Order>
                            <Size>128</Size>
                            <Type>MSR</Type>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>3</Order>
                            <Extend>true</Extend>
                            <Type>Primary</Type>
                        </CreatePartition>
                    </CreatePartitions>
                    <DiskID>0</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
            </DiskConfiguration>
            <ImageInstall>
                <OSImage>
                    <InstallTo>
                        <DiskID>0</DiskID>
                        <PartitionID>3</PartitionID>
                    </InstallTo>
                    <WillShowUI>OnError</WillShowUI>
                </OSImage>
            </ImageInstall>
            <UserData>
                <ProductKey>
                    <WillShowUI>OnError</WillShowUI>
                    <Key>12345-12345-12345-12345-12345</Key>
                </ProductKey>
                <AcceptEula>true</AcceptEula>
            </UserData>
        </component>
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="ia64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="https://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-US</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="ia64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="https://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OEMInformation>
                <Manufacturer>Fabrikam</Manufacturer>
                <HelpCustomized>false</HelpCustomized>
                <SupportPhone>123-456-7890</SupportPhone>
                <SupportURL>http://www.fabrikam.com</SupportURL>
                <SupportHours>Support Hours</SupportHours>
            </OEMInformation>
            <AutoLogon>
                <Password>
                    <Value>StrongPassword</Value>
                    <PlainText>true</PlainText>
                </Password>
                <Enabled>true</Enabled>
                <LogonCount>5</LogonCount>
                <Username>Administrator</Username>
            </AutoLogon>
            <ComputerName>ComputerName</ComputerName>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="ia64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="https://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserAccounts>
                <AdministratorPassword>
                    <Value>StrongPassword</Value>
                    <PlainText>true</PlainText>
                </AdministratorPassword>
            </UserAccounts>
        </component>
    </settings>
</unattend>

See Also

Concepts

Deploy to UEFI-based Computers