共用方式為

Netsh Routing IP Relay Context Commands

  • 發行項

Applies To: Windows Server 2008, Windows Server 2008 R2

The following commands are specific to the routing IP relay context within the Netsh environment.

To view the command syntax, click a command:

  • dump

  • install

  • uninstall

Add commands

  • add dhcpserver

  • add interface

Delete commands

  • delete interface

  • delete dhcpserver

Set commands

  • set global

  • set interface

Show commands

  • show ifbinding

  • show ifconfig

  • show ifstats

  • show interface

  • show global

Netsh commands for routing IP relay

  • The following entries provide details for each command.

dump

Displays the Dynamic Host Configuration Protocol (DHCP) Relay Agent configuration of a remote access server in script form.

Syntax

dump

Remarks

  • You can dump the contents of the current configuration to a file that can be used to restore altered configuration settings.

Example

The following commands save the current configuration as a script in the c:\test\relaycfg.dmp file.

  • From the command prompt:

    netsh routing ip relay dump > c:\test\relaycfg.dmp

  • From the netsh routing ip relay context prompt:

    set file open c:\test\relaycfg.dmp

    dump

    set file close

You can use the netsh exec command to run the script created by the netsh dump command.

add dhcpserver

Adds a DHCPv4 server to the list of DHCP servers whose messages will be forwarded by DHCP Relay Agent.

Syntax

add dhcpserver

[ server = ] IPAddress

Parameters

  • [ server = ] IPAddress
    Required. Specifies, by IPv4 address, the DHCP server you want to add.

Example

To add a DHCP server with the IPv4 address of 10.0.0.1 to the global list of DHCP servers, type:

add dhcpserver 10.0.0.1

add interface

Enables the DHCPv4 Relay Agent on the specified interface.

Syntax

add interface

[ name = ] InterfaceName

Parameters

  • [ name = ] InterfaceName
    Required. Specifies, by name, the interface on which you want to enable the DHCPv4 Relay Agent. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

Example

To enable DHCPv4 Relay Agent on the Local Area Connection interface, type:

add interface "Local Area Connection"

delete interface

Disables DHCPv4 Relay Agent on the specified interface.

Syntax

delete interface

[ name = ] InterfaceName

Parameters

  • [ name = ] InterfaceName
    Required. Specifies, by name, the interface on which you want to disable the DHCPv4 Relay Agent. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

Example

To disable the DHCPv4 Relay Agent on the Local Area Connection interface, type:

delete interface "Local Area Connection"

delete dhcpserver

Removes a DHCPv4 server from the list of DHCP servers whose messages will be forwarded by DHCP Relay Agent.

Syntax

delete dhcpserver

[ server = ] IPAddress

Parameters

  • [ server = ] IPAddress
    Required. Specifies, by IPv4 address, the DHCP server to be deleted.

Example

To delete a DHCP server with the IPv4 address of 10.0.0.1 from the global list of DHCP servers, type:

delete dhcpserver 10.0.0.1

set global

Sets global parameters for the DHCPv4 Relay Agent configuration.

Syntax

set global

[ loglevel = ] { none | error | warn | info }

Parameters

  • [ loglevel = ] { none | error | warn | info }
    Required. Specifies which DHCPv4 Relay Agent events should be logged.

    • none specifies that no events related to DHCP Relay Agent should be logged.

    • error specifies that only errors related to DHCP Relay Agent should be logged.

    • warn specifies that both errors and warnings related to DHCP Relay Agent should be logged.

    • info specifies that all events related to DHCP Relay Agent should be logged.

Example

To configure global parameters for DHCP Relay Agent to not log events, type:

set global loglevel=none

set interface

Updates the DHCPv4 Relay Agent configuration on an interface.

Syntax

set interface

[ name = ] InterfaceName

[ relaymode = ] { enable | disable }

[ [ maxhop = ] Integer ]

[ [ minsecs = ] Integer ]

Parameters

  • [ name = ] InterfaceName
    Required. Specifies, by name, the interface on which you want to update the configuration of the DHCPv4 Relay Agent. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").
  • [ relaymode = ] { enable | disable }
    Required. Specifies whether the DHCPv4 Relay Agent is enabled or disabled.
  • [ [ maxhop = ] Integer ]
    Specifies the number of hops a DHCPv4 packet can make before it is dropped and no longer relayed.
  • [ [ minsecs = ] Integer ]
    Specifies the minimum number of seconds from boot time that must appear in a DHCPv4 packet before it is sent to a DHCP server in the list of servers whose messages will be forwarded by the DHCPv4 Relay Agent.

Example

To update the DHCPv4 Relay Agent configuration on the interface named Local Area Connection with a maximum hop count of 16 and a value of 4 seconds for the minimum seconds from boot time, type:

set interface name="Local Area Connection" enable 16 4

show interface

Displays configuration information for the DHCPv4 Relay Agent on the specified interface. Used without parameters, show interface displays DHCP Relay Agent configuration information for all interfaces.

Syntax

show interface

[ name = ] InterfaceName

Parameters

  • [ name = ] InterfaceName
    Required. Specifies, by name, the interface for which you want to display information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

show global

Displays DHCPv4 Relay Agent global configuration.

Syntax

show global

show ifconfig

Displays DHCPv4 Relay Agent configuration information for the specified interface. Used without parameters, show ifconfig displays information once for all interfaces where the DHCPv4 Relay Agent is enabled.

Syntax

show ifconfig

[ [ index = ] Integer ]

[ [ rr = ] Integer ]

Parameters

  • [ index = ] Integer
    Specifies, by index value, the interface for which you want to display information. To determine the interface index number, use the netsh interface ipv4 show interfaces command.
  • [ rr = ] Integer
    Specifies, in seconds, how often you want the information to be refreshed.

Example

To display the DHCPv4 Relay Agent configuration with a 5-second refresh interval, type:

show ifconfig rr=5

show ifbinding

Displays IPv4 address bindings for the specified interface. Used without parameters, show ifbinding displays information once for all interfaces where DHCPv4 relay is enabled for use.

Syntax

show ifbinding

[ [ index = ] Integer ]

[ [ rr = ] Integer ]

Parameters

  • [ index = ] Integer ]
    Specifies, by index value, the interface for which you want to display information. To determine the interface index number, use the netsh interface ipv4 show interfaces command.
  • [ rr = ] Integer
    Specifies, in seconds, how often you want the information to be refreshed.

Example

To display the IP address bindings for all interfaces, type:

show ifbinding

show ifstats

Displays DHCPv4 Relay Agent statistics for the specified interface. Used without parameters, show ifstats displays information one time for all interfaces where DHCP relay is enabled for use.

Syntax

show ifstats

[ [ index = ] Integer ]

[ [ rr = ] Integer ]

Parameters

  • [ index = ] Integer
    Specifies, by index value, the interface for which you want to display information.
  • [ rr = ] Integer
    Specifies, in seconds, how often you want the information to be refreshed.

Example

To display DHCPv4 Relay Agent statistics for all interfaces, type:

show ifstats

install

Installs the DHCPv4 relay agent for use with IPv4.

Syntax

install

uninstall

Removes the DHCPv4 relay agent from IPv4.

Syntax

uninstall