USB-IF Certification Validation Test (Device)
This test checks the USB Implementers Forum (USB-IF) test ID that is provided after a device passes the USB-IF test.
Note
For a white paper about the Hardware Certification Kit (HCK) USB Implementers Forum (USB-IF) testing requirements, see Windows Hardware Certification Kit USB-IF Testing.
Test details
Associated requirements |
Device.Connectivity.UsbDevices.UsbifCertification |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2 |
Expected run time |
~2 minutes |
Categories |
Certification |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: USB Device.Connectivity Testing Prerequisites.
In addition, this test requires the following:
- The USB-IF ID value of your test device or the self-test logs for the device. You must set these parameters when you schedule this test. See the More information section for details.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Connectivity Testing.
More information
Parameters
| Parameter | Description |
|---|---|
TEST_ID |
The USB IF test ID. |
PATH_TO_LOGS |
If you do not specify a path to the log file, you must create the folder C:\USBLogs. |
INTEROP_TESTS_PASSED |
Confirms that the USB IF Interoperability tests ran and passed. |