共用方式為

Test.ZHeight

  • 發行項

This test verifies that device does not detect contacts that are not directly on the surface of the touchpad.

Test details

Associated requirements

Device.Input.PrecisionTouchpad.Precision.MaxReportZHeight

See the device hardware requirements.

Platforms

Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~2 minutes

Categories

Certification

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Mouse or other Pointing Device Testing Prerequisites.

To run this test, you will need precision capacitive contacts that can be placed 1mm above the surface of the touchpad and remain steady for a period of time. It is recommended that this test be performed by a robot or other precision mechanism.

  1. Place 1mm thick material on top of touchpad.

  2. Lower a precision contact until it just touches the non-conductive material.

  3. Remove the material.

  4. Leave contact in place above touchpad for 1 minute.

  5. Verify that no contact is reported and press P to manually pass the test. If contact is reported, press F to fail the test.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Input Testing.

More information

Command syntax

Command Description

ptlogo.exe Test.ZHeight.json

Runs the test.

 

File list

File Location

ptlogo.exe

<testbinroot>\input\PrecisionTouchpad\

config.json

<testbinroot>\input\PrecisionTouchpad\

Test.ZHeight.json

<testbinroot>\input\PrecisionTouchpad\

 

 

 

Send comments about this topic to Microsoft