共用方式為

Version tolerant binary serialization

  • 發行項

In the earliest versions of .NET Framework, creating binary-serializable types that would be reusable from one version of an application to the next was problematic. If a type was modified by adding extra fields, the following problems would occur:

  • Older versions of an application would throw exceptions when asked to deserialize new versions of the old type.
  • Newer versions of an application would throw exceptions when deserializing older versions of a type with missing data.

Version tolerant serialization (VTS) refers to a set of features that make it easier, over time, to modify binary-serializable types. Specifically, the VTS features are enabled for classes to which the SerializableAttribute attribute has been applied, including generic types. VTS makes it possible to add new fields to those classes without breaking compatibility with other versions of the type.

The VTS features are enabled when using the BinaryFormatter. Additionally, all features except extraneous data tolerance are also enabled when using the SoapFormatter. For more information about using these classes for serialization, see Binary Serialization.

Warning

Binary serialization can be dangerous. For more information, see BinaryFormatter security guide.

Feature list

The set of features includes the following:

  • Tolerance of extraneous or unexpected data. This enables newer versions of the type to send data to older versions.
  • Tolerance of missing optional data. This enables older versions to send data to newer versions.
  • Serialization callbacks. This enables intelligent default value setting in cases where data is missing.

In addition, there is a feature for declaring when a new optional field has been added. This is the VersionAdded property of the OptionalFieldAttribute attribute.

These features are discussed in greater detail in the following sections.

Tolerance of extraneous or unexpected data

In the past, during deserialization, any extraneous or unexpected data caused exceptions to be thrown. With VTS, in the same situation, any extraneous or unexpected data is ignored instead of causing exceptions to be thrown. This enables applications that use newer versions of a type (that is, a version that includes more fields) to send information to applications that expect older versions of the same type.

In the following example, the extra data contained in the CountryField of version 2.0 of the Address class is ignored when an older application deserializes the newer version.

// Version 1 of the Address class.  
[Serializable]  
public class Address  
{  
    public string Street;  
    public string City;  
}  
// Version 2.0 of the Address class.  
[Serializable]  
public class Address  
{  
    public string Street;  
    public string City;  
    // The older application ignores this data.  
    public string CountryField;  
}  

' Version 1 of the Address class.  
<Serializable> _  
Public Class Address  
    Public Street As String  
    Public City As String  
End Class  
  
' Version 2.0 of the Address class.  
<Serializable> _  
Public Class Address  
    Public Street As String  
    Public City As String  
    ' The older application ignores this data.  
    Public CountryField As String  
End Class

Tolerance of missing data

Fields can be marked as optional by applying the OptionalFieldAttribute attribute to them. During deserialization, if the optional data is missing, the serialization engine ignores the absence and does not throw an exception. Thus, applications that expect older versions of a type can send data to applications that expect newer versions of the same type.

The following example shows version 2.0 of the Address class with the CountryField field marked as optional. If an older application sends version 1 to a newer application that expects version 2.0, the absence of the data is ignored.

[Serializable]
public class Address
{
    public string Street;
    public string City;

    [OptionalField]
    public string CountryField;
}

<Serializable> _
Public Class Address
    Public Street As String
    Public City As String

    <OptionalField> _
    Public CountryField As String
End Class

Serialization callbacks

Serialization callbacks are a mechanism that provides hooks into the serialization/deserialization process at four points.

Attribute When the Associated Method is Called Typical Use
OnDeserializingAttribute Before deserialization.* Initialize default values for optional fields.
OnDeserializedAttribute After deserialization. Fix optional field values based on contents of other fields.
OnSerializingAttribute Before serialization. Prepare for serialization. For example, create optional data structures.
OnSerializedAttribute After serialization. Log serialization events.

* This callback is invoked before the deserialization constructor, if one is present.

Using callbacks

To use callbacks, apply the appropriate attribute to a method that accepts a StreamingContext parameter. Only one method per class can be marked with each of these attributes. For example:

[OnDeserializing]
private void SetCountryRegionDefault(StreamingContext sc)
{
    CountryField = "Japan";
}

<OnDeserializing>
Private Sub SetCountryRegionDefault(sc As StreamingContext)
    CountryField = "Japan"
End Sub

The intended use of these methods is for versioning. During deserialization, an optional field may not be correctly initialized if the data for the field is missing. This can be corrected by creating the method that assigns the correct value, then applying either the OnDeserializingAttribute or OnDeserializedAttribute attribute to the method.

The following example shows the method in the context of a type. If an earlier version of an application sends an instance of the Address class to a later version of the application, the CountryField field data will be missing. But after deserialization, the field will be set to a default value "Japan".

[Serializable]
public class Address
{
    public string Street;
    public string City;
    [OptionalField]
    public string CountryField;

    [OnDeserializing]
    private void SetCountryRegionDefault(StreamingContext sc)
    {
        CountryField = "Japan";
    }
}

<Serializable> _
Public Class Address
    Public Street As String
    Public City As String
    <OptionalField> _
    Public CountryField As String

    <OnDeserializing> _
    Private Sub SetCountryRegionDefault(sc As StreamingContext)
        CountryField = "Japan"
    End Sub
End Class

The VersionAdded property

The OptionalFieldAttribute has the VersionAdded property. The property indicates which version of a type a given field has been added. It should be incremented by exactly one (starting at 2) every time the type is modified, as shown in the following example:

// Version 1.0
[Serializable]
public class Person
{
    public string FullName;
}

// Version 2.0
[Serializable]
public class Person
{
    public string FullName;

    [OptionalField(VersionAdded = 2)]
    public string NickName;
    [OptionalField(VersionAdded = 2)]
    public DateTime BirthDate;
}

// Version 3.0
[Serializable]
public class Person
{
    public string FullName;

    [OptionalField(VersionAdded=2)]
    public string NickName;
    [OptionalField(VersionAdded=2)]
    public DateTime BirthDate;

    [OptionalField(VersionAdded=3)]
    public int Weight;
}

' Version 1.0
<Serializable> _
Public Class Person
    Public FullName
End Class

' Version 2.0
<Serializable> _
Public Class Person
    Public FullName As String

    <OptionalField(VersionAdded := 2)> _
    Public NickName As String
    <OptionalField(VersionAdded := 2)> _
    Public BirthDate As DateTime
End Class

' Version 3.0
<Serializable> _
Public Class Person
    Public FullName As String

    <OptionalField(VersionAdded := 2)> _
    Public NickName As String
    <OptionalField(VersionAdded := 2)> _
    Public BirthDate As DateTime

    <OptionalField(VersionAdded := 3)> _
    Public Weight As Integer
End Class

SerializationBinder

Some users may need to control which class to serialize and deserialize because a different version of the class is required on the server and client. SerializationBinder is an abstract class used to control the actual types used during serialization and deserialization. To use this class, derive a class from SerializationBinder and override the BindToName and BindToType methods.

Best practices

To ensure proper versioning behavior, follow these rules when modifying a type from version to version:

  • Never remove a serialized field.
  • Never apply the NonSerializedAttribute attribute to a field if the attribute was not applied to the field in the previous version.
  • Never change the name or the type of a serialized field.
  • When adding a new serialized field, apply the OptionalFieldAttribute attribute.
  • When removing a NonSerializedAttribute attribute from a field (that was not serializable in a previous version), apply the OptionalFieldAttribute attribute.
  • For all optional fields, set meaningful defaults using the serialization callbacks unless 0 or null as defaults are acceptable.

To ensure that a type will be compatible with future serialization engines, follow these guidelines:

  • Always set the VersionAdded property on the OptionalFieldAttribute attribute correctly.
  • Avoid branched versioning.

See also