Azure 傳統 CLI 命令
重要
傳統 VM 將於 2023 年 3 月 1 日淘汰。
如果您使用來自 ASM 的 IaaS 資源，請在 2023 年 3 月 1 日前完成移轉。 我們鼓勵您及早切換，以利用 Azure Resource Manager 的許多功能增強功能。
如需詳細資訊，請參閱請於 2023 年 3 月 1 日之前將您的 IaaS 資源遷移至 Azure Resource Manager。
本主題將說明如何安裝 Azure 傳統 CLI。 傳統 CLI 已有替代產品，應只搭配傳統部署模型使用。 若為所有其他部署，請使用 Azure CLI。
本文提供 Azure 傳統命令列介面的語法和選項， (CLI) 您通常用來建立和管理 Azure 資源的命令。 這不是完整的參考，您的 CLI 版本可能會顯示稍微不同的命令或參數。
若要開始使用，請先 安裝 azure 傳統 CLI ，並 連接到您的 azure 訂用帳戶。
如需在資源管理員模式中命令列目前的命令語法和選項，請輸入 azure help，或顯示特定命令的說明 azure help [command]。 也可以在文件中找到建立和管理特定 Azure 服務的 CLI 範例。
選用參數會以方括弧括住 (例如， [parameter])。 其他所有參數皆為必要參數。
除了本文所述的命令特定選用參數，還有三個選用參數可用來顯示詳細輸出，例如要求選項和狀態碼。
-v 參數提供詳細資訊輸出，而 -vv 參數提供更詳細的詳細資訊輸出。
--json 選項將以原始 json 格式輸出結果。
設定 Resource Manager 模式
如有需要，請使用下列命令來啟用 Azure CLI Resource Manager 模式的命令。
azure config mode arm
注意
CLI 的 Azure Resource Manager 模式與 Azure 服務管理模式是互斥的。 亦即，任一模式所建立的資源，將無法由另一種模式來管理。
帳戶資訊
此工具會使用您的 Azure 訂閱資訊來連線至您的帳戶。
列出匯入的訂用帳戶
account list [options]
顯示關於訂用帳戶的詳細資料
account show [options] [subscriptionNameOrId]
設定目前的訂用帳戶
account set [options] <subscriptionNameOrId>
移除訂用帳戶或環境，或清除所有儲存的帳戶和環境資訊
account clear [options]
管理帳戶環境的命令
account env list [options]
account env show [options] [environment]
account env add [options] [environment]
account env set [options] [environment]
account env delete [options] [environment]
Active Directory 物件
用來顯示 Active Directory 應用程式的命令
ad app create [options]
ad app delete [options] <object-id>
用來顯示 Active Directory 群組的命令
ad group list [options]
ad group show [options]
用來提供 Active Directory 子群組或成員資訊的命令
ad group member list [options] [objectId]
用來顯示 Active Directory 服務主體的命令
ad sp list [options]
ad sp show [options]
ad sp create [options] <application-id>
ad sp delete [options] <object-id>
用來顯示 Active Directory 使用者的命令
ad user list [options]
ad user show [options]
可用性設定組
在資源群組內建立可用性設定組
availset create [options] <resource-group> <name> <location> [tags]
在資源群組內列出可用性設定組
availset list [options] <resource-group>
在資源群組內取得一個可用性設定組
availset show [options] <resource-group> <name>
在資源群組內刪除一個可用性設定組
availset delete [options] <resource-group> <name>
本機設定
列出 Azure CLI 組態設定
config list [options]
刪除組態設定
config delete [options] <name>
更新組態設定
config set <name> <value>
設定 Azure CLI 工作模式為 arm 或 asm
config mode [options] <modename>
帳戶功能
列出您訂用帳戶可用的所有功能
feature list [options]
顯示功能
feature show [options] <providerName> <featureName>
註冊資源提供者的預覽功能
feature register [options] <providerName> <featureName>
資源群組
建立資源群組
group create [options] <name> <location>
為資源群組設定標記
group set [options] <name> <tags>
刪除資源群組
group delete [options] <name>
列出您訂用帳戶的資源群組
group list [options]
顯示您訂用帳戶的資源群組
group show [options] <name>
用來管理資源群組記錄的命令
group log show [options] [name]
用來管理資源群組中部署的命令
group deployment create [options] [resource-group] [name]
group deployment list [options] <resource-group> [state]
group deployment show [options] <resource-group> [deployment-name]
group deployment stop [options] <resource-group> [deployment-name]
用來管理本機或資源庫資源群組範本的命令
group template list [options]
group template show [options] <name>
group template download [options] [name] [file]
group template validate [options] <resource-group>
HDInsight 叢集
用來建立或新增至叢集組態檔的命令
hdinsight config create [options] <configFilePath> <overwrite>
hdinsight config add-config-values [options] <configFilePath>
hdinsight config add-script-action [options] <configFilePath>
範例：建立一個組態檔，其中包含會在建立叢集時執行的指令碼動作。
hdinsight config create "C:\myFiles\configFile.config"
hdinsight config add-script-action --configFilePath "C:\myFiles\configFile.config" --nodeType HeadNode --uri <scriptActionURI> --name myScriptAction --parameters "-param value"
用來在資源群組中建立叢集的命令
hdinsight cluster create [options] <clusterName>
範例：在 Linux 叢集上建立 Storm
azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Storm --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 myNewCluster01
info: Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info: hdinsight cluster create command OK
範例：使用指令碼動作建立叢集
azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Hadoop --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 –configurationPath "C:\myFiles\configFile.config" myNewCluster01
info: Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info: hdinsight cluster create command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
-vv more verbose with debug output
--json use json output
-g --resource-group <resource-group> The name of the resource group
-c, --clusterName <clusterName> HDInsight cluster name
-l, --location <location> Data center location for the cluster
-y, --osType <osType> HDInsight cluster operating system
'Windows' or 'Linux'
--version <version> HDInsight cluster version
--clusterType <clusterType> HDInsight cluster type.
Hadoop | HBase | Spark | Storm
--defaultStorageAccountName <storageAccountName> Storage account url to use for default HDInsight storage
--defaultStorageAccountKey <storageAccountKey> Key to the storage account to use for default HDInsight storage
--defaultStorageContainer <storageContainer> Container in the storage account to use for HDInsight default storage
--headNodeSize <headNodeSize> (Optional) Head node size for the cluster
--workerNodeCount <workerNodeCount> Number of worker nodes to use for the cluster
--workerNodeSize <workerNodeSize> (Optional) Worker node size for the cluster)
--zookeeperNodeSize <zookeeperNodeSize> (Optional) Zookeeper node size for the cluster
--userName <userName> Cluster username
--password <password> Cluster password
--sshUserName <sshUserName> SSH username (only for Linux clusters)
--sshPassword <sshPassword> SSH password (only for Linux clusters)
--sshPublicKey <sshPublicKey> SSH public key (only for Linux clusters)
--rdpUserName <rdpUserName> RDP username (only for Windows clusters)
--rdpPassword <rdpPassword> RDP password (only for Windows clusters)
--rdpAccessExpiry <rdpAccessExpiry> RDP access expiry.
For example 12/12/2015 (only for Windows clusters)
--virtualNetworkId <virtualNetworkId> (Optional) Virtual network ID for the cluster.
Value is a GUID for Windows cluster and ARM resource ID for Linux cluster)
--subnetName <subnetName> (Optional) Subnet for the cluster
--additionalStorageAccounts <additionalStorageAccounts> (Optional) Additional storage accounts.
Can be multiple.
In the format of 'accountName#accountKey'.
For example, --additionalStorageAccounts "acc1#key1;acc2#key2"
--hiveMetastoreServerName <hiveMetastoreServerName> (Optional) SQL Server name for the external metastore for Hive
--hiveMetastoreDatabaseName <hiveMetastoreDatabaseName> (Optional) Database name for the external metastore for Hive
--hiveMetastoreUserName <hiveMetastoreUserName> (Optional) Database username for the external metastore for Hive
--hiveMetastorePassword <hiveMetastorePassword> (Optional) Database password for the external metastore for Hive
--oozieMetastoreServerName <oozieMetastoreServerName> (Optional) SQL Server name for the external metastore for Oozie
--oozieMetastoreDatabaseName <oozieMetastoreDatabaseName> (Optional) Database name for the external metastore for Oozie
--oozieMetastoreUserName <oozieMetastoreUserName> (Optional) Database username for the external metastore for Oozie
--oozieMetastorePassword <oozieMetastorePassword> (Optional) Database password for the external metastore for Oozie
--configurationPath <configurationPath> (Optional) HDInsight cluster configuration file path
-s, --subscription <id> The subscription id
--tags <tags> Tags to set to the cluster.
Can be multiple.
In the format of 'name=value'.
Name is required and value is optional.
For example, --tags tag1=value1;tag2
用來刪除叢集的命令
hdinsight cluster delete [options] <clusterName>
用來顯示叢集詳細資料的命令
hdinsight cluster show [options] <clusterName>
用來列出所有叢集的命令 (如有提供特定的資源群組，則會列於其中)
hdinsight cluster list [options]
用來調整叢集大小的命令
hdinsight cluster resize [options] <clusterName> <targetInstanceCount>
用來啟用叢集 HTTP 存取的命令
hdinsight cluster enable-http-access [options] <clusterName> <userName> <password>
用來停用叢集 HTTP 存取的命令
hdinsight cluster disable-http-access [options] <clusterName>
用來啟用叢集 RDP 存取的命令
hdinsight cluster enable-rdp-access [options] <clusterName> <rdpUserName> <rdpPassword> <rdpExpiryDate>
用來停用叢集 HTTP 存取的命令
hdinsight cluster disable-rdp-access [options] <clusterName>
Insights (事件、警示規則、自動調整設定、計量)
擷取訂用帳戶、CorrelationID、資源群組、資源或資源提供者的作業記錄
insights logs list [options]
位置
列出可用的位置
location list [options]
網路資源
用來管理虛擬網路的命令
network vnet create [options] <resource-group> <name> <location>
建立虛擬網路。 在下列範例中，我們會針對美國西部區域中的 myresourcegroup 資源群組，建立名為 newvnet 的虛擬網路。
azure network vnet create myresourcegroup newvnet "west us"
info: Executing command network vnet create
+ Looking up virtual network "newvnet"
+ Creating virtual network "newvnet"
Loading virtual network state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet create command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-l, --location <location> the location
-a, --address-prefixes <address-prefixes> the comma separated list of address prefixes for this virtual network
For example -a 10.0.0.0/24,10.0.1.0/24.
Default value is 10.0.0.0/8
-d, --dns-servers <dns-servers> the comma separated list of DNS servers IP addresses
-t, --tags <tags> the tags set on this virtual network.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network vnet set [options] <resource-group> <name>
更新資源群組內的虛擬網路組態。
azure network vnet set myresourcegroup newvnet
info: Executing command network vnet set
+ Looking up virtual network "newvnet"
+ Updating virtual network "newvnet"
+ Loading virtual network state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet set command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-a, --address-prefixes <address-prefixes> the comma separated list of address prefixes for this virtual network.
For example -a 10.0.0.0/24,10.0.1.0/24.
This list will be appended to the current list of address prefixes.
The address prefixes in this list should not overlap between them.
The address prefixes in this list should not overlap with existing address prefixes in the vnet.
-d, --dns-servers [dns-servers] the comma separated list of DNS servers IP addresses.
This list will be appended to the current list of DNS server IP addresses.
-t, --tags <tags> the tags set on this virtual network.
Can be multiple. In the format of "name=value".
Name is required and value is optional. For example, -t tag1=value1;tag2.
This list will be appended to the current list of tags
--no-tags remove all existing tags
-s, --subscription <subscription> the subscription identifier
network vnet list [options] <resource-group>
此命令可列出資源群組中的所有虛擬網路。
C:\>azure network vnet list myresourcegroup
info: Executing command network vnet list
+ Listing virtual networks
data: ID
Name Location Address prefixes DNS servers
data: -------------------------------------------------------------------
------ -------- -------- ---------------- -----------
data: /subscriptions/###############################/resourceGroups/
wvnet newvnet westus 10.0.0.0/8
info: network vnet list command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network vnet show [options] <resource-group> <name>
此命令會顯示資源群組中的虛擬網路屬性。
azure network vnet show -g myresourcegroup -n newvnet
info: Executing command network vnet show
+ Looking up virtual network "newvnet"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet show command OK
network vnet delete [options] <resource-group> <name>
此命令會移除虛擬網路。
azure network vnet delete myresourcegroup newvnetX
info: Executing command network vnet delete
+ Looking up virtual network "newvnetX"
Delete virtual network newvnetX? [y/n] y
+ Deleting virtual network "newvnetX"
info: network vnet delete command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
用來管理虛擬網路子網路的命令
network vnet subnet create [options] <resource-group> <vnet-name> <name>
可將其他子網路新增現有虛擬網路。
azure network vnet subnet create -g myresourcegroup --vnet-name newvnet -n subnet --address-prefix 10.0.1.0/24
info: Executing command network vnet subnet create
+ Looking up the subnet "subnet"
+ Creating subnet "subnet"
+ Looking up the subnet "subnet"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data: Name: subnet
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet create command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the name of the subnet
-a, --address-prefix <address-prefix> the address prefix
-w, --network-security-group-id <network-security-group-id> the network security group identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
-o, --network-security-group-name <network-security-group-name> the network security group name
-s, --subscription <subscription> the subscription identifier
network vnet subnet set [options] <resource-group> <vnet-name> <name>
設定資源群組內的特定虛擬網路子網路。
C:\>azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet set command OK
network vnet subnet list [options] <resource-group> <vnet-name>
列出資源群組內適用於特定虛擬網路的所有虛擬網路子網路。
azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet set command OK
network vnet subnet show [options] <resource-group> <vnet-name> <name>
顯示虛擬網路子網路屬性
azure network vnet subnet show -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet show
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft
.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet show command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the name of the subnet
-s, --subscription <subscription> the subscription identifier
network vnet subnet delete [options] <resource-group> <vnet-name> <subnet-name>
從現有的虛擬網路移除子網路。
azure network vnet subnet delete -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet delete
+ Looking up the subnet "subnet1"
Delete subnet "subnet1"? [y/n] y
+ Deleting subnet "subnet1"
info: network vnet subnet delete command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the subnet name
-s, --subscription <subscription> the subscription identifier
-q, --quiet quiet mode, do not ask for delete confirmation
用來管理負載平衡器的命令
network lb create [options] <resource-group> <name> <location>
建立負載平衡器集合。
azure network lb create -g myresourcegroup -n mylb -l westus
info: Executing command network lb create
+ Looking up the load balancer "mylb"
+ Creating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data: Name: mylb
data: Type: Microsoft.Network/loadBalancers
data: Location: westus
data: Provisioning state: Succeeded
info: network lb create command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-l, --location <location> the location
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional. For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network lb list [options] <resource-group>
列出資源群組中負載平衡器資源。
azure network lb list myresourcegroup
info: Executing command network lb list
+ Getting the load balancers
data: Name Location
data: ---- --------
data: mylb westus
info: network lb list command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network lb show [options] <resource-group> <name>
顯示資源群組中特定負載平衡器的負載平衡器資訊
azure network lb show myresourcegroup mylb -v
info: Executing command network lb show
verbose: Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data: Name: mylb
data: Type: Microsoft.Network/loadBalancers
data: Location: westus
data: Provisioning state: Succeeded
info: network lb show command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb delete [options] <resource-group> <name>
刪除負載平衡器資源。
azure network lb delete myresourcegroup mylb
info: Executing command network lb delete
+ Looking up the load balancer "mylb"
Delete load balancer "mylb"? [y/n] y
+ Deleting load balancer "mylb"
info: network lb delete command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
用來管理負載平衡器探查的命令
network lb probe create [options] <resource-group> <lb-name> <name>
建立負載平衡器中健康狀態的探查組態。 請記住，若要執行此命令，您的負載平衡器需要前端 IP 資源 (查看「azure network frontend-ip」命令以將 IP 位址指派至負載平衡器)。
azure network lb probe create -g myresourcegroup --lb-name mylb -n mylbprobe --protocol tcp --port 80 -i 300
info: Executing command network lb probe create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info: network lb probe create command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the probe
-p, --protocol <protocol> the probe protocol
-o, --port <port> the probe port
-f, --path <path> the probe path
-i, --interval <interval> the probe interval in seconds
-c, --count <count> the number of probes
-s, --subscription <subscription> the subscription identifier
network lb probe set [options] <resource-group> <lb-name> <name>
使用適用的新值來更新現有的負載平衡器探查。
azure network lb probe set -g myresourcegroup -l mylb -n mylbprobe -p mylbprobe1 -p TCP -o 443 -i 300
info: Executing command network lb probe set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info: network lb probe set command OK
參數選項
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the probe
-e, --new-probe-name <new-probe-name> the new name of the probe
-p, --protocol <protocol> the new value for probe protocol
-o, --port <port> the new value for probe port
-f, --path <path> the new value for probe path
-i, --interval <interval> the new value for probe interval in seconds
-c, --count <count> the new value for number of probes
-s, --subscription <subscription> the subscription identifier
network lb probe list [options] <resource-group> <lb-name>
列出負載平衡器集合的探查屬性。
C:\>azure network lb probe list -g myresourcegroup -l mylb
info: Executing command network lb probe list
+ Looking up the load balancer "mylb"
data: Name Protocol Port Path Interval Count
data: --------- -------- ---- ---- -------- -----
data: mylbprobe Tcp 443 300 2
info: network lb probe list command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb probe delete [options] <resource-group> <lb-name> <name>
移除針對負載平衡器所建立的探查。
azure network lb probe delete -g myresourcegroup -l mylb -n mylbprobe
info: Executing command network lb probe delete
+ Looking up the load balancer "mylb"
Delete a probe "mylbprobe?" [y/n] y
+ Updating load balancer "mylb"
info: network lb probe delete command OK
用來管理負載平衡器前端 IP 組態的命令
network lb frontend-ip create [options] <resource-group> <lb-name> <name>
建立前端 IP 組態至現有的負載平衡器集合。
azure network lb frontend-ip create -g myresourcegroup --lb-name mylb -n myfrontendip -o Dynamic -e subnet -m newvnet
info: Executing command network lb frontend-ip create
+ Looking up the load balancer "mylb"
+ Looking up the subnet "subnet"
+ Creating frontend IP configuration "myfrontendip"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/Myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
/frontendIPConfigurations/myfrontendip
data: Name: myfrontendip
data: Type: Microsoft.Network/loadBalancers/frontendIPConfigurations
data: Provisioning state: Succeeded
data: Private IP allocation method: Dynamic
data: Private IP address: 10.0.1.4
data: Subnet: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data: Public IP address:
data: Inbound NAT rules
data: Outbound NAT rules
data: Load balancing rules
data:
info: network lb frontend-ip create command OK
network lb frontend-ip set [options] <resource-group> <lb-name> <name>
更新前端 IP 的現有組態。下列命令會將名為 mypubip5 的公用 IP 新增至名為 myfrontendip 的現有負載平衡器前端 IP。
azure network lb frontend-ip set -g myresourcegroup --lb-name mylb -n myfrontendip -i mypubip5
info: Executing command network lb frontend-ip set
+ Looking up the load balancer "mylb"
+ Looking up the public ip "mypubip5"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Name: myfrontendip
data: Type: Microsoft.Network/loadBalancers/frontendIPConfigurations
data: Provisioning state: Succeeded
data: Private IP allocation method: Dynamic
data: Private IP address:
data: Subnet:
data: Public IP address: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mypubip5
data: Inbound NAT rules
data: Outbound NAT rules
data: Load balancing rules
data:
info: network lb frontend-ip set command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the frontend ip configuration
-a, --private-ip-address <private-ip-address> the private ip address
-o, --private-ip-allocation-method <private-ip-allocation-method> the private ip allocation method [Static, Dynamic]
-u, --public-ip-id <public-ip-id> the public ip identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-i, --public-ip-name <public-ip-name> the public ip name.
This public ip must exist in the same resource group as the lb.
Please use public-ip-id if that is not the case.
-b, --subnet-id <subnet-id> the subnet id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/VirtualNetworks/<vnet-name>/subnets/<subnet-name>
-e, --subnet-name <subnet-name> the subnet name
-m, --vnet-name <vnet-name> the virtual network name.
This virtual network must exist in the same resource group as the lb.
Please use subnet-id if that is not the case.
-s, --subscription <subscription> the subscription identifier
network lb frontend-ip list [options] <resource-group> <lb-name>
列出針對負載平衡器所設定的前端 IP 資源。
azure network lb frontend-ip list -g myresourcegroup -l mylb
info: Executing command network lb frontend-ip list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Private IP allocation method Subnet
data: ----------- ------------------ ---------------------------- ------
data: myprivateip Succeeded Dynamic
info: network lb frontend-ip list command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb frontend-ip delete [options] <resource-group> <lb-name> <name>
刪除與負載平衡器相關聯的前端 IP 物件
network lb frontend-ip delete -g myresourcegroup -l mylb -n myfrontendip
info: Executing command network lb frontend-ip delete
+ Looking up the load balancer "mylb"
Delete frontend ip configuration "myfrontendip"? [y/n] y
+ Updating load balancer "mylb"
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the frontend ip configuration
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
用來管理負載平衡器後端位址集區的命令
network lb address-pool create [options] <resource-group> <lb-name> <name>
建立負載平衡器的後端位址集區。
azure network lb address-pool create -g myresourcegroup --lb-name mylb -n myaddresspool
info: Executing command network lb address-pool create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourgroup/providers/Microso.Network/loadBalancers/mylb/backendAddressPools/myaddresspool
data: Name: myaddresspool
data: Type: Microsoft.Network/loadBalancers/backendAddressPools
data: Provisioning state: Succeeded
data: Backend IP configurations:
data: Load balancing rules:
data:
info: network lb address-pool create command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the backend address pool
-s, --subscription <subscription> the subscription identifier
network lb address-pool list [options] <resource-group> <lb-name>
列出特定資源群組的後端 IP 位址集區範圍
azure network lb address-pool list -g myresourcegroup -l mylb
info: Executing command network lb address-pool list
+ Looking up the load balancer "mylb"
data: Name Provisioning state
data: ------------- ------------------
data: mybackendpool Succeeded
info: network lb address-pool list command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb address-pool delete [options] <resource-group> <lb-name> <name>
移除來自負載平衡器的後端 IP 集區範圍資源。
azure network lb address-pool delete -g myresourcegroup -l mylb -n mybackendpool
info: Executing command network lb address-pool delete
+ Looking up the load balancer "mylb"
Delete backend address pool "mybackendpool"? [y/n] y
+ Updating load balancer "mylb"
info: network lb address-pool delete command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the backend address pool
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
用來管理負載平衡器規則的命令
network lb rule create [options] <resource-group> <lb-name> <name>
建立負載平衡器規則。
您可以建立負載平衡器規則，用以設定負載平衡器的前端端點，以及設定接收傳入網路流量的後端位址集區範圍。 設定也包含前端 IP 端點的連接埠以及後端位址集區範圍的連接埠。
下列範例顯示如何建立負載平衡器規則、接聽連接埠 80 TCP 的前端端點，以及針對後端位址集區範圍傳送至連接埠 8080 的負載平衡網路流量。
azure network lb rule create -g myresourcegroup -l mylb -n mylbrule -p tcp -f 80 -b 8080 -i 10
info: Executing command network lb rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mylbrule
data: Name: mylbrule
data: Type: Microsoft.Network/loadBalancers/loadBalancingRules
data: Provisioning state: Succeeded
data: Frontend IP configuration: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend address pool: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data: Protocol: Tcp
data: Frontend port: 80
data: Backend port: 8080
data: Enable floating IP: false
data: Idle timeout in minutes: 10
data: Probes
data:
info: network lb rule create command OK
network lb rule set [options] <resource-group> <lb-name> <name>
更新特定資源群組中的現有負載平衡器規則設定。 在下列範例中，我們會將規則名稱從 mylbrule 變更為 mynewlbrule。
azure network lb rule set -g myresourcegroup -l mylb -n mylbrule -r mynewlbrule -p tcp -f 80 -b 8080 -i 10 -t myfrontendip -o mybackendpool
info: Executing command network lb rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data: Id: /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mynewlbrule
data: Name: mynewlbrule
data: Type: Microsoft.Network/loadBalancers/loadBalancingRules
data: Provisioning state: Succeeded
data: Frontend IP configuration: /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend address pool: id=/subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data: Protocol: Tcp
data: Frontend port: 80
data: Backend port: 8080
data: Enable floating IP: false
data: Idle timeout in minutes: 10
data: Probes
data:
info: network lb rule set command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the rule
-r, --new-rule-name <new-rule-name> new rule name
-p, --protocol <protocol> the rule protocol
-f, --frontend-port <frontend-port> the frontend port
-b, --backend-port <backend-port> the backend port
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip
-i, --idle-timeout <idle-timeout> the idle timeout in minutes
-a, --probe-name [probe-name] the name of the probe defined in the same load balancer
-t, --frontend-ip-name <frontend-ip-name> the name of the frontend ip configuration in the same load balancer
-o, --backend-address-pool <backend-address-pool> name of the backend address pool defined in the same load balancer
-s, --subscription <subscription> the subscription identifier
network lb rule list [options] <resource-group> <lb-name>
列出特定資源群組中針對負載平衡器所設定的所有負載平衡器規則。
azure network lb rule list -g myresourcegroup -l mylb
info: Executing command network lb rule list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Protocol Frontend port Backend port Enable floating IP Idle timeout in minutes Backend address pool Probe data
data: mynewlbrule Succeeded Tcp 80 8080 false 10 /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
info: network lb rule list command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb rule delete [options] <resource-group> <lb-name> <name>
刪除負載平衡器規則。
azure network lb rule delete -g myresourcegroup -l mylb -n mynewlbrule
info: Executing command network lb rule delete
+ Looking up the load balancer "mylb"
Delete load balancing rule mynewlbrule? [y/n] y
+ Updating load balancer "mylb"
info: network lb rule delete command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the rule
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
用來管理負載平衡器輸入 NAT 規則的命令
network lb inbound-nat-rule create [options] <resource-group> <lb-name> <name>
建立負載平衡器的輸入 NAT 規則。
在下列範例中，我們建立了前端 IP (的 NAT 規則，此規則先前是使用「azure 網路前端 ip」命令) ，其中包含負載平衡器用來傳送網路流量的輸入接聽埠和輸出埠。
azure network lb inbound-nat-rule create -g myresourcegroup -l mylb -n myinboundnat -p tcp -f 80 -b 8080 -i myfrontendip
info: Executing command network lb inbound-nat-rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data: Name: myinboundnat
data: Type: Microsoft.Network/loadBalancers/inboundNatRules
data: Provisioning state: Succeeded
data: Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend IP configuration
data: Protocol Tcp
data: Frontend port 80
data: Backend port 8080
data: Enable floating IP false
info: network lb inbound-nat-rule create command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-p, --protocol <protocol> the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port> the frontend port [0-65535]
-b, --backend-port <backend-port> the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip> the name of the frontend ip configuration
-m, --vm-id <vm-id> the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name> the VM name.This VM must exist in the same resource group as the lb.
Please use vm-id if that is not the case.
this parameter will be ignored if --vm-id is specified
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule set [options] <resource-group> <lb-name> <name>
更新現有的輸入 NAT 規則。 在下列範例中，我們會將輸入接聽連接埠從 80 變更為 81。
azure network lb inbound-nat-rule set -g group-1 -l mylb -n myinboundnat -p tcp -f 81 -b 8080 -i myfrontendip
info: Executing command network lb inbound-nat-rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data: Name: myinboundnat
data: Type: Microsoft.Network/loadBalancers/inboundNatRules
data: Provisioning state: Succeeded
data: Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend IP configuration
data: Protocol Tcp
data: Frontend port 81
data: Backend port 8080
data: Enable floating IP false
info: network lb inbound-nat-rule set command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-p, --protocol <protocol> the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port> the frontend port [0-65535]
-b, --backend-port <backend-port> the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip> the name of the frontend ip configuration
-m, --vm-id [vm-id] the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name> the VM name.
This virtual machine must exist in the same resource group as the lb.
Please use vm-id if that is not the case
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule list [options] <resource-group> <lb-name>
列出負載平衡器的所有輸入 NAT 規則。
azure network lb inbound-nat-rule list -g myresourcegroup -l mylb
info: Executing command network lb inbound-nat-rule list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Protocol Frontend port Backend port Enable floating IP Idle timeout in minutes Backend IP configuration
data: ------------ ------------------ -------- ------------- ------------ ------------------ ----------------------- ---
---------------------
data: myinboundnat Succeeded Tcp 81 8080 false 4
info: network lb inbound-nat-rule list command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule delete [options] <resource-group> <lb-name> <name>
刪除特定資源群組中負載平衡器的 NAT 規則。
azure network lb inbound-nat-rule delete -g myresourcegroup -l mylb -n myinboundnat
info: Executing command network lb inbound-nat-rule delete
+ Looking up the load balancer "mylb"
Delete inbound NAT rule "myinboundnat?" [y/n] y
+ Updating load balancer "mylb"
info: network lb inbound-nat-rule delete command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
用來管理公用 IP 位址的命令
network public-ip create [options] <resource-group> <name> <location>
建立公用 IP 資源。 您將建立公用 IP 資源，並與網域名稱建立關聯。
azure network public-ip create -g myresourcegroup -n mytestpublicip1 -l eastus -d azureclitest -a "Dynamic"
info: Executing command network public-ip create
+ Looking up the public ip "mytestpublicip1"
+ Creating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data: Name: mytestpublicip1
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Dynamic
data: Idle timeout: 4
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip create command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public ip
-l, --location <location> the location
-d, --domain-name-label <domain-name-label> the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method> the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout> the idle timeout in minutes
-f, --reverse-fqdn <reverse-fqdn> the reverse fqdn
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network public-ip set [options] <resource-group> <name>
更新現有公用 IP 資源的屬性。 在下列範例中，我們會將公用 IP 位址從動態變更為靜態。
azure network public-ip set -g group-1 -n mytestpublicip1 -d azureclitest -a "Static"
info: Executing command network public-ip set
+ Looking up the public ip "mytestpublicip1"
+ Updating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data: Name: mytestpublicip1
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Static
data: Idle timeout: 4
data: IP Address: (static IP address)
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip set command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public ip
-d, --domain-name-label [domain-name-label] the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method> the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout> the idle timeout in minutes
-f, --reverse-fqdn [reverse-fqdn] the reverse fqdn
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
--no-tags remove all existing tags
-s, --subscription <subscription> the subscription identifier
network public-ip list [options] <resource-group>
列出資源群組內的所有公用 IP 資源。
azure network public-ip list -g myresourcegroup
info: Executing command network public-ip list
+ Getting the public ip addresses
data: Name Location Allocation IP Address Idle timeout DNS Name
data: --------------- -------- ---------- ------------ ------------ -------------------------------------------
data: mypubip5 westus Dynamic 4 "domain name".westus.cloudapp.azure.com
data: myPublicIP eastus Dynamic 4 "domain name".eastus.cloudapp.azure.com
data: mytestpublicip eastus Dynamic 4 "domain name".eastus.cloudapp.azure.com
data: mytestpublicip1 eastus Static (Static IP address) 4 azureclitest.eastus.cloudapp.azure.com
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network public-ip show [options] <resource-group> <name>
顯示資源群組中公用 IP 資源的公用 IP 屬性。
azure network public-ip show -g myresourcegroup -n mytestpublicip
info: Executing command network public-ip show
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip
data: Name: mytestpublicip
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Static
data: Idle timeout: 4
data: IP Address: (static IP address)
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip show command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public IP
-s, --subscription <subscription> the subscription identifier
network public-ip delete [options] <resource-group> <name>
刪除公用 IP 資源。
azure network public-ip delete -g group-1 -n mypublicipname
info: Executing command network public-ip delete
+ Looking up the public ip "mypublicipname"
Delete public ip address "mypublicipname"? [y/n] y
+ Deleting public ip address "mypublicipname"
info: network public-ip delete command OK
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public IP
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
用來管理網路介面的命令
network nic create [options] <resource-group> <name> <location>
建立稱為網路介面 (NIC) 的資源，可用於負載平衡器或與虛擬機器建立關聯。
azure network nic create -g myresourcegroup -l eastus -n testnic1 --subnet-name subnet-1 --subnet-vnet-name myvnet
info: Executing command network nic create
+ Looking up the network interface "testnic1"
+ Looking up the subnet "subnet-1"
+ Creating network interface "testnic1"
+ Looking up the network interface "testnic1"
data: Id: /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/networkInterfaces/testnic1
data: Name: testnic1
data: Type: Microsoft.Network/networkInterfaces
data: Location: eastus
data: Provisioning state: Succeeded
data: IP configurations:
data: Name: NIC-config
data: Provisioning state: Succeeded
data: Private IP address: 10.0.0.5
data: Private IP Allocation Method: Dynamic
data: Subnet: /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/virtualNetworks/myVNET/subnets/Subnet-1
參數選項：
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the network interface
-l, --location <location> the location
-w, --network-security-group-id <network-security-group-id> the network security group identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
-o, --network-security-group-name <network-security-group-name> the network security group name.
This network security group must exist in the same resource group as the nic.
Please use network-security-group-id if that is not the case.
-i, --public-ip-id <public-ip-id> the public IP identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-p, --public-ip-name <public-ip-name> the public IP name.
This public ip must exist in the same resource group as the nic.
Please use public-ip-id if that is not the case.
-a, --private-ip-address <private-ip-address> the private IP address
-u, --subnet-id <subnet-id> the subnet identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/virtualNetworks/<vnet-name>/subnets/<subnet-name>
--subnet-name <subnet-name> the subnet name
-m, --subnet-vnet-name <subnet-vnet-name> the vnet name under which subnet-name exists
-t, --tags <tags> the comma separated list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
data:
info: network nic create command OK
network nic set [options] <resource-group> <name>
network nic list [options] <resource-group>
network nic show [options] <resource-group> <name>
network nic delete [options] <resource-group> <name>
用來管理網路安全性群組的命令
network nsg create [options] <resource-group> <name> <location>
network nsg set [options] <resource-group> <name>
network nsg list [options] <resource-group>
network nsg show [options] <resource-group> <name>
network nsg delete [options] <resource-group> <name>
用來管理網路安全性群組規則的命令
network nsg rule create [options] <resource-group> <nsg-name> <name>
network nsg rule set [options] <resource-group> <nsg-name> <name>
network nsg rule list [options] <resource-group> <nsg-name>
network nsg rule show [options] <resource-group> <nsg-name> <name>
network nsg rule delete [options] <resource-group> <nsg-name> <name>
用來管理流量管理員設定檔的命令
network traffic-manager profile create [options] <resource-group> <name>
network traffic-manager profile set [options] <resource-group> <name>
network traffic-manager profile list [options] <resource-group>
network traffic-manager profile show [options] <resource-group> <name>
network traffic-manager profile delete [options] <resource-group> <name>
network traffic-manager profile is-dns-available [options] <resource-group> <relative-dns-name>
用來管理流量管理員端點的命令
network traffic-manager profile endpoint create [options] <resource-group> <profile-name> <name> <endpoint-location>
network traffic-manager profile endpoint set [options] <resource-group> <profile-name> <name>
network traffic-manager profile endpoint delete [options] <resource-group> <profile-name> <name>
用來管理虛擬網路閘道的命令
network gateway list [options] <resource-group>
資源提供者註冊
列出 Resource Manager 中目前已註冊的提供者
provider list [options]
顯示要求提供者命名空間的相關詳細資料
provider show [options] <namespace>
註冊訂用帳戶的提供者
provider register [options] <namespace>
取消註冊訂用帳戶的提供者
provider unregister [options] <namespace>
資源
建立資源群組中的資源
resource create [options] <resource-group> <name> <resource-type> <location> <api-version>
更新資源群組中的資源而不使用任何範本或參數
resource set [options] <resource-group> <name> <resource-type> <properties> <api-version>
列出資源
resource list [options] [resource-group]
取得資源群組或訂用帳戶中的一項資源
resource show [options] <resource-group> <name> <resource-type> <api-version>
刪除資源群組中的資源
resource delete [options] <resource-group> <name> <resource-type> <api-version>
Azure 角色
取得所有可用的角色定義
role list [options]
取得一項可用的角色定義
role show [options] [name]
用來管理角色指派的命令
role assignment create [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment list [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment delete [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
儲存體物件
管理儲存體帳戶的命令
storage account list [options]
storage account show [options] <name>
storage account create [options] <name>
storage account set [options] <name>
storage account delete [options] <name>
用來管理儲存體帳戶金鑰的命令
storage account keys list [options] <name>
storage account keys renew [options] <name>
用來顯示儲存體連接字串的命令
storage account connectionstring show [options] <name>
用來管理儲存體容器的命令
storage container list [options] [prefix]
storage container show [options] [container]
storage container create [options] [container]
storage container delete [options] [container]
storage container set [options] [container]
用來管理儲存體容器共用存取簽章的命令
storage container sas create [options] [container] [permissions] [expiry]
用來管理儲存體容器已儲存存取原則的命令
storage container policy create [options] [container] [name]
storage container policy show [options] [container] [name]
storage container policy list [options] [container]
storage container policy set [options] [container] [name]
storage container policy delete [options] [container] [name]
用來管理儲存體 blob 的命令
storage blob list [options] [container] [prefix]
storage blob show [options] [container] [blob]
storage blob delete [options] [container] [blob]
storage blob upload [options] [file] [container] [blob]
storage blob download [options] [container] [blob] [destination]
用來管理 blob 複製作業的命令
storage blob copy start [options] [sourceUri] [destContainer]
storage blob copy show [options] [container] [blob]
storage blob copy stop [options] [container] [blob] [copyid]
用來管理儲存體 blob 共用存取簽章的命令
storage blob sas create [options] [container] [blob] [permissions] [expiry]
用來管理儲存體檔案共用的命令
storage share create [options] [share]
storage share show [options] [share]
storage share delete [options] [share]
storage share list [options] [prefix]
用來管理儲存體檔案的命令
storage file list [options] [share] [path]
storage file delete [options] [share] [path]
storage file upload [options] [source] [share] [path]
storage file download [options] [share] [path] [destination]
用來管理儲存體檔案目錄的命令
storage directory create [options] [share] [path]
storage directory delete [options] [share] [path]
用來管理儲存體佇列的命令
storage queue create [options] [queue]
storage queue list [options] [prefix]
storage queue show [options] [queue]
storage queue delete [options] [queue]
用來管理儲存體佇列共用存取簽章的命令
storage queue sas create [options] [queue] [permissions] [expiry]
用來管理儲存體佇列已儲存存取原則的命令
storage queue policy create [options] [queue] [name]
storage queue policy show [options] [queue] [name]
storage queue policy list [options] [queue]
storage queue policy set [options] [queue] [name]
storage queue policy delete [options] [queue] [name]
用來管理儲存體記錄屬性的命令
storage logging show [options]
storage logging set [options]
用來管理儲存體計量屬性的命令
storage metrics show [options]
storage metrics set [options]
用來管理儲存體資料表的命令
storage table create [options] [table]
storage table list [options] [prefix]
storage table show [options] [table]
storage table delete [options] [table]
用來管理儲存體資料表共用存取簽章的命令
storage table sas create [options] [table] [permissions] [expiry]
用來管理儲存體資料表已儲存存取原則的命令
storage table policy create [options] [table] [name]
storage table policy show [options] [table] [name]
storage table policy list [options] [table]
storage table policy set [options] [table] [name]
storage table policy delete [options] [table] [name]
標籤
新增標記
tag create [options] <name> <value>
移除整個標記或標記值
tag delete [options] <name> <value>
列出標記資訊
tag list [options]
取得標記
tag show [options] [name]
虛擬機器
建立 VM
vm create [options] <resource-group> <name> <location> <os-type>
建立使用預設資源的 VM
vm quick-create [options] <resource-group> <name> <location> <os-type> <image-urn> <admin-username> <admin-password
提示
從 CLI 0.10 版開始，對於某些受歡迎的 Marketplace 映像，您可以在 image-urn 中提供簡短的別名，例如 "UbuntuLTS" 或 "Win2012R2Datacenter"。 執行 azure help vm quick-create 以取得選項。 此外，從 0.10 版開始， azure vm quick-create 依預設會使用進階儲存體 (如果可在所選區域中使用)。
列出帳戶內的虛擬機器
vm list [options]
取得資源群組中的一個虛擬機器
vm show [options] <resource-group> <name>
刪除資源群組中的一個虛擬機器
vm delete [options] <resource-group> <name>
關閉資源群組中的一個虛擬機器
vm stop [options] <resource-group> <name>
重新啟動資源群組中的一個虛擬機器
vm restart [options] <resource-group> <name>
啟動資源群組中的一個虛擬機器
vm start [options] <resource-group> <name>
關閉資源群組中的一個虛擬機器，並釋放計算資源
vm deallocate [options] <resource-group> <name>
列出可用的虛擬機器大小
vm sizes [options]
擷取 VM 作為 OS 映像或 VM 映像
vm capture [options] <resource-group> <name> <vhd-name-prefix>
將 VM 的狀態設定為一般化
vm generalize [options] <resource-group> <name>
取得 VM 的執行個體檢視
vm get-instance-view [options] <resource-group> <name>
可讓您重設虛擬機器上的遠端桌面存取或 SSH 設定，以及針對具有系統管理員或 sudo 授權單位的帳戶重設密碼
vm reset-access [options] <resource-group> <name>
以新資料更新 VM
vm set [options] <resource-group> <name>
用來管理虛擬機器資料磁碟的命令
vm disk attach-new [options] <resource-group> <vm-name> <size-in-gb> [vhd-name]
vm disk detach [options] <resource-group> <vm-name> <lun>
vm disk attach [options] <resource-group> <vm-name> [vhd-url]
用來管理 VM 資源延伸的命令
vm extension set [options] <resource-group> <vm-name> <name> <publisher-name> <version>
vm extension get [options] <resource-group> <vm-name>
用來管理 Docker 虛擬機器的命令
vm docker create [options] <resource-group> <name> <location> <os-type>
用來管理 VM 映像的命令
vm image list-publishers [options] <location>
vm image list-offers [options] <location> <publisher>
vm image list-skus [options] <location> <publisher> <offer>
vm image list [options] <location> <publisher> [offer] [sku]