Put Job

發行項
09/22/2015

The Put Job operation creates a new job in the Windows Azure Import/Export service.

Request

The Put Job request may be constructed as follows. HTTPS is required. Replace <subscription-id> with your subscription ID, <storage-account-name> with the name of your storage account, and <job-name> with the name of your import job or export job:

Method	Request URI
PUT	https://management.core.windows.net/subscription-id/services/importexport/storageaccounts/storage-account-name/jobs/jobname[?$format=format]

URI Parameters

Parameter	Description
format	Optional. Can be used to override the Accept header. See the Accept request header for additional information. The following is an example of the $format query parameter: $format=application/json;odata=minimalmetadata

format

Optional. Can be used to override the Accept header. See the Accept request header for additional information.

The following is an example of the $format query parameter:

$format=application/json;odata=minimalmetadata

Request Headers

The following table describes required and optional request headers.

Request Header	Description
Accept	Optional. If specified, it must be application/json (which specifies the JSON Light format). Other values will result in response code 406 (Not Acceptable). One of the following parameters can also be included: odata=minimalmetadata odata=nometatadata odata=fullmetadata The default parameter is odata=minimalmetadata. The following is an example header: Accept: application/json;odata=minimalmetadata
Accept-Language	Optional. Currently only the values en and en-us are supported.
Content-Encoding	Optional. If this header is specified, the value must be set to identity.
Content-Length	Required. Specifies the length of the request body.
Content-Type	Optional. If this header is specified, the value must be set to application/json. All other values will result in status code 406 (Not Acceptable).
x-ms-date	Optional. If specified, the value should specify the date and time when the request is sent, in the RFC 1123 format.
x-ms-version	Required. Specifies the service management version to use for this request. The value of this header must be set to 2014-05-01 or 2014-05-01.
If-Modified-Since	Optional. A DateTime value. Specify this header to perform the operation only if the resource has been modified since the specified time.
If-Unmodified-Since	Optional. A DateTime value. Specify this header to perform the operation only if the resource has not been modified since the specified date/time.
If-Match	Optional. An ETag value. Specify this header to perform the operation only if the resource's ETag matches the value specified.
If-None-Match	Optional. An ETag value, or the wildcard character (). Specify this header to perform the operation only if the resource's ETag does not match the value specified. Specify the wildcard character () to perform the operation only if the resource does not exist, and fail the operation if it does exist.
X-HTTP-Method	Optional. If this header is specified, its value must be PUT and the HTTP verb for the request must be GET. The request will be processed as if it were a PUT request.

Request Body

The format of the request body is as follows.

{
  "odata.type":"Microsoft.Cis.Services.ImportExport.Public.Job",
  "odata.id":"name",
  "odata.editLink":"https://management.core.windows.net/<subscription-id>/services/importexport/jobs/name",
  "Name":"name",
  "Properties":{
"StorageAccountKey": "storage-account-key",
"ContainerSas": "container-sas",
"Location": "location-name",
    "Type":"job-type",
    "FriendlyName":"human-readable-job-name",
    "Description":"job-description",
    "Metadata":"job-metadata",
    "ReturnAddress":{
      "Name":"return-name",
      "Address":"return-address",
      "Phone":"return-phone",
      "Email":"return-email"
    },
    "ReturnShipping":{
      "CarrierName":"carrier-name",
      "CarrierAccountNumber":"carrier-account-number"
    },
    "ImportExportStatesPath":"importexport-states-path",
    "EnableVerboseLog":enable-verbose-log,
    "BackupDriveManifest":backup-drive-manifest
  },
  "DriveList":[
    {
      "DriveId":"drive-id",
      "BitLockerKey":"bitlocker-key",
      "ManifestFile":"manifest-file-path",
      "ManifestHash":"manifest-hash-value"
    },
    {
      . . .
    },
    . . .
    ]
  }
  "Export":{
    Blob-selection-fragment
  }
}

Blob-selection-fragment ::=
Blob-list-fragment | Blob-list-blob-fragment

Blob-list-fragment ::=
"BlobList":{
  "BlobPath":[
    "blob-path",
    "blob-path",
    . . .
  ],
  "BlobPathPrefix":[
    "blob-prefix",
    "blob-prefix",
    . . .
  ]
}

Blob-list-blob-fragment ::=
    "BlobListBlobPath":"blob-list-blob-path"

The format of the blob list blob is as follows.

<?xml version="1.0" encoding="utf-8"?>
<BlobList>
    <BlobPath>blob-path</BlobPath>
    <BlobPath>blob-path</BlobPath>
    . . .
    <BlobPathPrefix>blob-prefix</BlobPathPrefix>
    <BlobPathPrefix>blob-prefix</BlobPathPrefix>
    . . .
</BlobList>

The following table describes the elements of the request body.

Element	Type	Description
Name	String	Required. The name of the import or export job. Uniquely identifies the job within the same subscription.
Properties	property	Required. A list of properties for the job.
StorageAccountKey	String	Optional. The storage account key. You must include either StorageAccountKey or ContainerSas in the request. StorageAccountKey is available with all REST versions, while ContainerSas is only available with REST version 2014-11-01.
ContainerSas	String	Optional. The container SAS to use to import or export data to or from the storage account. You must include either StorageAccountKey or ContainerSas in the request. StorageAccountKey is available with all REST versions, while ContainerSas is only available with REST version 2014-11-01. The value of ContainerSas must start with the container name, followed by a question mark (?) and the SAS token. For example: mycontainer?sv=2014-02-14&sr=c&si=abcde&sig=LiqEmV%2Fs1LF4loC%2FJs9ZM91%2FkqfqHKhnz0JM6bqIqN0%3D&se=2014-11-20T23%3A54%3A14Z&sp=rwdl The permissions, whether specified on the URL or in a stored access policy, must include Read, Write, and Delete for import jobs, and Read, Write and List for export jobs. The sv (service version) parameter must be set to version 2014-02-14 or later. When ContainerSas is specified, all blobs to be imported or exported must be within the container specified in the shared access signature. In addition, the ImportExportStatesPath must also include this container.
Location	String	Required. The location where the job will be processed. Note this may not be the same location where your storage account resides. See the List Locations operation to obtain the correct location.
Type	String	Required. Indicates whether this is an import job or an export job.
FriendlyName	String	Optional. A human-readable name for the job. May contain Unicode characters and spaces.
Description	CDATA	Optional. A human-readable description of the job.
Metadata	CDATA	Optional. Metadata associated with the job.
ImportExportStatesPath	String	Optional. The container or virtual directory where the copy logs and backups of drive manifest files (if enabled) will be stored. If a value is not specified for this element, the logs and manifest files will be written to a container or virtual directory named waimportexport. If a StorageAccountKey is specified on the request, then logs and manifest files will be written to a container with that name. If a ContainerSas is specified, then logs and manifest files will be written to a virtual directory named named waimportexport and located beneath the container named in the shared access signature. See Import/Export Service Log File Format for details. Note that in REST version 2014-05-01, this element is called ImportExportStatesContainer and its value must be a container name.
EnableVerboseLog	Boolean	Optional. Default value is false. Indicates whether verbose logging will be enabled. When enabled, the verbose log will contain detailed logs for each chunk copy, including status for both successful and non-successful copy operations. Regardless of whether verbose logging is enabled, warnings and errors will always be logged. Log files are stored as block blobs in the container specified by the ImportExportStatesPath element, using the following naming convention: waies/jobname_driveid_timestamp_logtype.xml. The addresses of the verbose logs (if enabled) and error logs are returned by the Get Job operation.
BackupDriveManifest	Boolean	Optional. Default value is false. Indicates whether the manifest files on the drives should be copied to block blobs. If this value is true, the destination blobs will be stored in the container specified by the ImportExportStatesPath element. Manifest files are stored as block blobs in the container specified by the ImportExportStatesPath element, using the following naming convention: waies/jobname_driveid_timestamp_manifest.xml The addresses of the manifest file backups are returned by the Get Job operation.
ReturnAddress	property	Optional. Specifies the return address information for the job.
Name	String	Required. The name of the recipient who will receive the hard drives when they are returned.
Address	String	Required. Address of the recipient of the returned drives.
Phone	String	Required. Phone number of the recipient of the returned drives.
Email	String	Required. Email address of the recipient of the returned drives.
ReturnShipping	Property	Optional. Specifies the return carrier and customer’s account with the carrier.
CarrierName	String	Required. The carrier’s name.
CarrierAccountNumber	String	Required. The customer’s account number with the carrier.
DriveList	property	Optional. List of up to ten drives that comprise the job. The drive list is a required element for an import job; it is not specified for export jobs.
Drive	property	Required. Contains information about a drive.
DriveId	String	Required. The drive's hardware serial number, without spaces.
BitLockerKey	String	Required. The BitLocker key used to encrypt the drive.
ManifestFile	String	Required. The relative path of the manifest file on the drive.
ManifestHash	String	Required. The Base16-encoded MD5 hash of the manifest file on the drive.
Export	property	Optional. A property containing information about the blobs to be exported for an export job. This property is required for export jobs, but must not be specified for import jobs.
BlobList	property	Optional. A list of the blobs to be exported. The size of the data provided for this property must not exceed 32KB. If it is larger than 32KB, store the information as a blob in the storage account associated with the export job, and specify the BlobListBlobPath property to point to this blob. Note that any snapshots of the specified blobs will also be exported. For block blobs, only committed blobs and blocks are exported. See Put Block List and List Blobs for more information about committed and uncommitted blocks.
BlobPath	Collection	Optional. A collection of blob-path strings.
blob-path	String	Required. The relative URI to the blob, beginning with the container name. If the blob is in root container, you must explicitly specify $root in the path.
BlobPathPrefix	Collection	Optional. A collection of blob-prefix strings.
blob-prefix	String	Required. A blob path prefix that specifies all blobs whose relative path begins with that prefix. The prefix must begin with a forward slash "/" and must include the container name. If the container is the root container, you must explicitly specify $root in the path. See the Remarks section for examples of valid blob prefix values.
BlobListBlobPath	String	Optional. The relative URI to the block blob that contains the list of blob paths or blob path prefixes as defined above, beginning with the container name. If the blob is in root container, the URI must begin with $root.

The following describes the general format for listing blobs in the BlobList blob:

<?xml version="1.0" encoding="utf-8"?>
<BlobList>
    [<BlobPathPrefix>blob-prefix</BlobPathPrefix>]
    . . .
    [<BlobPath [IncludeSnapshots="true|false"]>blob-path</BlobPath>]
    . . .
    [<BlobPath SnapshotTime="snapshot-time">blob-path</BlobPath>]
    . . .
</BlobList>

The elements and attributes of the XML format are defined as follows.

XML Element	Type	Description
BlobList	Root element	Required. Contains a list of blob paths or prefixes for the blobs to be exported.
BlobList/BlobPathPrefix	String	Optional. A blob path prefix that specifies all blobs whose relative path begins with that prefix. The prefix must begin with a forward slash "/" and must include the container name. If the container is the root container, you must explicitly specify $root in the path.
BlobList/BlobPath	String	Optional. The relative URI to the blob, beginning with the container name. If the blob is in root container, you must explicitly specify $root in the path.
BlobList/BlobPath/@IncludeSnapshots	Attribute, Boolean	Optional. Specifies whether to include all snapshots of the blob. The default value is true.
BlobList/BlobPath/@SnapshotTime	Attribute, DateTime	Optional. Specifies the snapshot identifier for a blob snapshot.

Response

The response includes an HTTP status code and a set of response headers.

Status Code

A successful operation returns status code 201 (Created).

Response Headers

The response for this operation includes the following headers.

Response Header	Description
Content-Encoding	The value of this header will always be identity.
Content-Length	The length of the content returned in the response.
Content-Type	Specifies the format in which the results are returned. The value of this header will always be application/json.
DataServiceId	The address of the job being created.
Date	A UTC date/time value generated by the service that indicates the time at which the response was initiated.
ETag	Contains a value that the client can use to perform conditional operations by using the If-Match or If-None-Match request header.
Last-Modified	The date/time that the job was last modified. The date format follows RFC 1123. For more information, see Representation of Date/Time Values in Headers.
x-ms-request-id	A value that uniquely identifies a request made against the Import/Export service.
x-ms-version	Indicates the version of the Import/Export service used to execute the request.

Response Body

If the request fails, the response body will contain the following error message:

{
  "odata.error": {
    "code": "http-code",
    "message": {
        "lang": "en-US",
        "value": "detailed-error-message"
    },
    "azure.values": [
      { "ExtendedCode": "extended-error-code" },
      { "ExtendedInformation": "extended-information" }
    ]
  }
}

Element	Type	Description
http-code	String	The standard HTTP status code returned when the request fails.
detailed-error-message	String	A human-readable description of the error.
Extended-code	String	A predefined error code, if applicable.
Extended-information	String	Additional information provided to diagnose the error.

Sample Request and Response

The following shows a sample request and response for the Put Job operation.

Request

PUT https://management.core.windows.net/afb1a4eb-bc88-4ce1-b1af-dfec80067464/services/importexport/storageaccounts/xttest/jobs/MySampleJob?timeout=3600 HTTP/1.1
x-ms-version: 2014-05-01
x-ms-date: Wed, 30 Apr 2014 00:23:50 GMT
DataServiceVersion: 3.0;
Content-Type: application/json
Accept: application/json
Host: management.core.windows.net
Content-Length: 1232
Expect: 100-continue
Connection: Keep-Alive

{
  "odata.type":"Microsoft.Cis.Services.ImportExport.Public.Job","odata.id":"MySampleJob","odata.editLink":"https://management.core.windows.net/afb1a4eb-bc88-4ce1-b1af-dfec80067464/services/importexport/jobs/MySampleJob","Name":"MySampleJob","Properties":{
    "StorageAccountName":"xttest","StorageAccountKey":"SaXzhgVbqJ32nhPSibJAO5pe8z6G2rPhrsFGZW52kAnJxegjw9U9Lucw9AljfFRlWCpIo4gsB6Ecl+eRoGvd/A==","Location":"South Central US","Type":"Import","FriendlyName":"A sample job using Windows Azure Import/Export service.","Description":"Optional more detailed description about this job.","ReturnAddress":{
      "Name":"John Doe","Address":"One Microsoft Way, Redmond, WA 98052","Phone":"1-800-000-0000","Email":"johndoe@outlook.com"
    },"EnableVerboseLog":true,"BackupDriveManifest":true
  },"DriveList":[
    {
      "DriveId":"1W0F9LV1","BitLockerKey":"259358-100188-581471-154165-090552-296406-410091-426844","ManifestFile":"\\DriveManifest.xml","ManifestHash":"B306C4B34DAA0E99957A4B9C779D2FA2"
    },{
      "DriveId":"9WM3NZFS","BitLockerKey":"360294-634645-210485-401192-415272-513568-389334-516043","ManifestFile":"\\DriveManifest.xml","ManifestHash":"DDBEDA902DABD438D2C40B2744C64B1D"
    }
  ]
}

Response

HTTP/1.1 201 Created
Cache-Control: no-cache
Transfer-Encoding: chunked
Content-Encoding: identity
Content-Language: en-us
Last-Modified: Wed, 30 Apr 2014 00:23:52 GMT
ETag: W/"datetime'2014-04-30T00%3A23%3A52.6173161Z'"
Server: 1.0.6198.70 (rd_rdfe_stable.140426-2318) Microsoft-HTTPAPI/2.0
x-ms-servedbyregion: ussouth2
x-ms-version: 2014-05-01
x-ms-request-id: d84d1c93200e94e5a599debd536f7b06
Date: Wed, 30 Apr 2014 00:23:52 GMT

0

Remarks

A subscription may have up to twenty jobs active at any given time, not counting jobs that are in the Completed state. Each job may be in one of several different job states; in each state, operations are expected to complete within a certain period of time, or the job will be internally marked as faulted and an investigation will be conducted.

Each job may be comprised of up to ten drives for import or export. To import data that spans more than ten drives, you'll need to create additional jobs.

Note that if you specify a job name that is already associated with a job in the same subscription that is in any state other than Creating, the new Put Job request will be rejected, regardless of any conditional headers specified. If you wish to reuse the same job name, you must first complete the existing job and then delete it.

To update properties of an existing job, you can call the Update Job Properties operation.

After you create a job, you must ship your disks within two weeks. If the disks are not shipped within that interval, the job will automatically be deleted by the Windows Azure Import/Export service.

The service will automatically delete a completed job after 90 days. You can explicitly delete the job prior to that time by calling the Delete Job operation.

When you create an export job, you can specify the blobs to be exported in any of these ways:

You can specify a full blob path to export a single blob.
You can specify a blob path prefix to export all blobs that begin with the prefix. The prefix must begin with a forward slash and all or part of the container name.
You can specify a relative URI to a blob in the storage account that contains a list of blobs to export.
The following table shows some examples of valid blob paths and prefixes:

Prefix	Matches These Blobs
/picturecontainer	All blobs in container picturecontainer
/bob	All blobs in containers bob and bobkids
/bob/	All blobs in container bob, but not bobkids, picturecontainer or videocontainer
/picturecontainer/image	Blobs picturecontainer/image, picturecontainer/image.png, picturecontainer/ image2.png, picturecontainer/image/photo.png, and picturecontainer/imagefiles/photo.png
/$root/	All blobs in the root container
/	All blobs in all containers, including the root container.

If a blob to be exported is currently leased, the service attempts to create a snapshot of the blob and export the snapshot instead of the original blob. If a snapshot cannot be created, the blob will be skipped for the current export job but will be included in the incomplete blob list (see Get Job).

Conditional Headers

You can call Put Job with conditional headers specified to create the job only when certain conditions are met. When specifying conditional headers, keep in mind the following:

If a request specifies both the If-None-Match and If-Modified-Since headers, the request is evaluated based on the criteria specified in If-None-Match.
If a request specifies both the If-Match and If-Unmodified-Since headers, the request is evaluated based on the criteria specified in If-Match.
With the exception of the two combinations of conditional headers listed above, a request may specify only a single conditional header. Specifying more than one conditional header results in status code 400 (Bad Request).

The following table indicates the response codes returned for an unmet condition for each conditional header:

Conditional header	Response code if condition has not been met
If-Modified-Since	Precondition Failed (412)
If-Unmodified-Since	Precondition Failed (412)
If-Match	Precondition Failed (412)
If-None-Match	Precondition Failed (412)

共用方式為

Put Job

Request

URI Parameters

Request Headers

Request Body

Response

Status Code

Response Headers

Response Body

Sample Request and Response

Request

Response

Remarks

Conditional Headers

See Also

其他資源