Add-VMMigrationNetwork
Adds a network for virtual machine migration on one or more virtual machine hosts.
Syntax
Add-VMMigrationNetwork
[-CimSession <CimSession[]>]
[-Subnet] <String>
[[-Priority] <UInt32>]
[-Passthru]
[-ComputerName <String[]>]
[-Credential <PSCredential[]>]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Add-VMMigrationNetwork cmdlet adds a network for virtual machine migration on one or more virtual machine hosts.
Examples
Example 1
PS C:\> Add-VMMigrationNetwork 192.168.0.1This example adds an IPv4 address as a live migration network on the local Hyper-V host.
Example 2
PS C:\> Add-VMMigrationNetwork 192.168.10.0/24This example adds an IPv4 address range as possible live migration networks on the local Hyper-V host by using a subnet mask.
Example 3
PS C:\> Add-VMMigrationNetwork 2001:836c:6456:1c99::/32This example adds an IPv6 address range as possible live migration networks on the local Hyper-V host by adding a subnet mask.
Example 4
PS C:\> Add-VMMigrationNetwork 2001:836c:6456:1c99::/64 -Priority 8This example adds an IPv6 address range as possible live migration networks on the local Hyper-V host by using a subnet mask and specifying the network as lower priority.
Parameters
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ComputerName
Specifies one or more Hyper-V hosts on which the network is to be added for virtual machine migration. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Credential
Specifies one or more user accounts that have permission to perform this action. The default is the current user.
| Type: | PSCredential[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Passthru
Specifies that an Microsoft.HyperV.PowerShell.MigrationNetwork object is to be passed through to the pipeline representing the network added for virtual machine migration.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Priority
Specifies the priority of the network to be added for virtual machine migration. Multiple networks can have the same priority.
| Type: | UInt32 |
| Position: | 1 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Subnet
Specifies a string representing an IPv4 or IPv6 subnet mask which identifies the network to be added for virtual machine migration.
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Outputs
None
Default
Microsoft.HyperV.PowerShell.MigrationNetwork
If -PassThru is specified.