Remove-DhcpServerv4PolicyIPRange
Deletes an IP range from an existing policy at the scope level.
Syntax
Remove-DhcpServerv4PolicyIPRange
[-Name] <String>
[-ScopeId] <IPAddress>
[[-StartRange] <IPAddress>]
[[-EndRange] <IPAddress>]
[-PassThru]
[-ComputerName <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Remove-DhcpServerv4PolicyIPRange cmdlet deletes an IP range from an existing policy at the scope level.
If you specify neither the StartRange nor the EndRange parameter, all of the IP address ranges associated with the policy are deleted.
If you specify only the StartRange parameter, the policy IP address range which has the specified starting address is deleted.
If you specify only the EndRange parameter, the policy IP address range which has the specified ending address is deleted.
Examples
Example 1: Delete an IP address range from a policy
PS C:\> Remove-DhcpServerv4PolicyIPRange -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0 -Name "HyperVPolicy" -StartRange 10.10.10.10 -EndRange 10.10.10.20This example deletes the IP address range from 10.10.10.10 through 10.10.10.20 that is associated with the policy named HyperVPolicy in the scope 10.10.10.0.
Example 2: Delete all IP address ranges from a policy
PS C:\> Remove-DhcpServerv4PolicyIPRange -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0 -Name "HyperVPolicy"This example deletes all of the IP address ranges associated with the policy named HyperVPolicy in the scope 10.10.10.0.
Example 3: Delete a range by specifying a start address
PS C:\> Remove-DhcpServerv4PolicyIPRange -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0 -Name "HyperVPolicy" -StartRange 10.10.10.10This example deletes the IP address range starting from 10.10.10.10 that is associated with the policy named HyperVPolicy in the scope 10.10.10.0.
Example 4: Delete a range by specifying an end address
PS C:\> Remove-DhcpServerv4PolicyIPRange -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0 -Name "HyperVPolicy" -EndRange 10.10.10.20This example deletes the IP address range ending at 10.10.10.10 that is associated with the policy named HyperVPolicy in the scope 10.10.10.0.
Parameters
-AsJob
Runs the cmdlet as a background job.
Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell® background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the Dynamic Host Configuration Protocol (DHCP) server service.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndRange
Specifies the ending IP address of the IP address range to delete from the policy.
| Type: | IPAddress |
| Position: | 4 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Name
Specifies the name of the policy for which one or more associated IP address ranges are deleted.
| Type: | String |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScopeId
Specifies the scope identifier (ID), in IPv4 address format, which contains the specified policy.
| Type: | IPAddress |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-StartRange
Specifies the starting IP address of the IP address range to delete from the policy.
| Type: | IPAddress |
| Position: | 3 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.