編輯

共用方式為


Get-DhcpServerv6OptionValue

Returns the IPv6 option values for one or more IPv6 options either for a specific reserved IP, scope or, server level.

Syntax

Get-DhcpServerv6OptionValue
   [-ComputerName <String>]
   [-VendorClass <String>]
   [[-Prefix] <IPAddress>]
   [-ReservedIP <IPAddress>]
   [-UserClass <String>]
   [[-OptionId] <UInt32[]>]
   [-All]
   [-Brief]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]

Description

The Get-DhcpServerv6OptionValue cmdlet returns the IPv6 option values for one or more IPv6 options either for a specific reserved IP, scope, or server level. The option identifier (ID) can be a standard option or for a specified vendor class. If you do not specify the OptionId parameter, all option values at the requested level, such as reservation, scope, server, are returned.

If you specify the ReservedIP parameter, the option values set at the reservation level are returned. If you specify the Prefix parameter, the option values set at the specified scope level are returned. If you specify neither the Prefix nor the ReservedIP parameter, the option values set at the server level are returned.

If you specify neither the VendorClass nor the UserClass parameter, this cmdlet returns the standard option values.

Examples

Example 1: Get standard option values at the server level

PS C:\> Get-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com"

This example gets all of the standard DHCPv6 option values, non-class specific, configured at the server level.

Example 2: Get standard option values for a scope

PS C:\> Get-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020::

This example gets all of the standard DHCPv6 option values, non-class specific, configured for the specified scope.

Example 3: Get standard options values for a reservation

PS C:\> Get-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -ReservedIP 2001:4898:7020:1020::5

This example gets all of the standard DHCPv6 option values, non-class specific, configured for the specified reservation.

Example 4: Get verdor class specific option values for a vendor class

PS C:\> Get-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -VendorClass "MSUCClient"

This example gets all of the vendor class specific DHCPv6 option values configured on the specified scope for the specified vendor class.

Example 5: Get an option value for a scope by using option ID

PS C:\> Get-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -OptionId 23

This example gets the DHCPv6 option value configured on the specified scope for the specified option identifier.

Example 6: Get all option values for a scope

PS C:\> Get-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -All

This example gets all of the DHCPv6 option values configured on the specified scope. The DHCPv6 option values that are returned include the standard and also vendor class or user class specific options.

Example 7: Get standard option values for a scope in brief

PS C:\> Get-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -Brief

This example gets all of the standard DHCPv6 option values configured on the specified scope. The object that is returned does not contain the name of the option. The Brief parameter improves the performance of this cmdlet by not requesting the name of the option from the DHCP server service.

Example 8: Get user specific option values for a user class

PS C:\> Get-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -UserClass "LabComputer"

This example gets all of the user class specific DHCPv6 option values configured on the specified scope for the specified user class.

Parameters

-All

Indicates that this cmdlet gets the option values for a scope, server, or reservation. Option values can include vendor class and user class specific.

If only this parameter is specified, this cmdlet gets all of the option values for the specified scope, reservation, or server.

If you specify the OptionId parameter and this parameter, option values for the specified option ID for all of the vendor classes and user classes are returned.

If you specify the VendorClass parameter and this parameter, all of the option values for the specified vendor class including those for any user class would be returned.

If you specify the UserClass parameter and this parameter, all of the option values for the specified user class including any vendor specific options would be returned.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell® background jobs, see about_Jobs.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Brief

Specifies that the name of the option is not returned in the option value object. This parameter improves the performance of this cmdlet by not requesting the name of the option from the Dynamic Host Configuration Protocol (DHCP) server service. For repeatedly fetching a large number of option values by using this cmdlet, we recommend use of the Brief parameter.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.

Type:String
Aliases:Cn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-OptionId

Specifies the numeric identifier of the options for which one or more values are being requested. If you do not specify this parameter, all option values configured are returned.

Type:UInt32[]
Position:1
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Prefix

Specifies the IPv6 subnet prefix of the scope for which the option values are requested.

Type:IPAddress
Position:2
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ReservedIP

Specifies the reserved IPv6 address for which the option values are requested.

Type:IPAddress
Aliases:IPAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-UserClass

Specifies that the option values for the specified user class are returned.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-VendorClass

Specifies that the option values for the specified vendor class are returned.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

CimInstance[]

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.