Set-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline
Sets the vulnerability assessment rule baseline.
Syntax
Set-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline
[-ServerName] <String>
[-DatabaseName] <String>
[-InputObject <VulnerabilityAssessmentRuleBaselineModel>]
-BaselineResult <String[][]>
-RuleId <String>
[-RuleAppliesToMaster]
[-ResourceGroupName] <String>
[-DefaultProfile <IAzureContextContainer>]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-AzureRmSqlDatabaseVulnerabilityAssessmentRuleBaseline cmdlet sets the vulnerability assessment rule baseline. As you review your assessment results, you can mark specific results as being an acceptable Baseline in your environment. The baseline is essentially a customization of how the results are reported. Results that match the baseline are considered as passing in subsequent scans. Once you have established your baseline security state, vulnerability assessment only reports on deviations from the baseline, and you can focus your attention on the relevant issues. Note that you need to run Enable-AzSqlServerAdvancedDataSecurity and Update-AzSqlServerVulnerabilityAssessmentSetting cmdlet as a prerequisite for using this cmdlets.
Examples
Example 1: Set a vulnerability assessment rule baseline
Set-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline `
-ResourceGroupName "ahmadtesting" `
-ServerName "ahmadpilotserver" `
-DatabaseName "AhmadPilotDb" `
-BaselineResult @(,@('dbo', 'db_owner', 'SQL_USER', 'INSTANCE')) `
-RuleID 'VA2108'
Rule ID Rule Applies To Master Baseline Results
------- ---------------------- ----------------
VA2108 False {dbo;db_owner;SQL_USER;INSTANCE}
$arrayList = [System.Collections.ArrayList]::new()
$arrayList.Add(@('dbo', 'db_owner', 'SQL_USER', 'INSTANCE'))
Set-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline `
-ResourceGroupName "demoresourcegroup" `
-ServerName "demosqlser" `
-DatabaseName "SQL_ERConnect" `
-BaselineResult $arrayList `
-RuleID 'VA2108'
Rule ID Rule Applies To Master Baseline Results
------- ---------------------- ----------------
VA2108 False {dbo;db_owner;SQL_USER;INSTANCE}
Set-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline `
-ResourceGroupName "ResourceGroup01" `
-ServerName "Server01" `
-DatabaseName "Database01" `
-RuleId "VA2108" `
-RuleAppliesToMaster `
-BaselineResult @( 'Principal1', 'db_ddladmin', 'SQL_USER', 'None') , @( 'Principal2', 'db_ddladmin', 'SQL_USER', 'None')
ResourceGroupName : ResourceGroup01
ServerName : Server01
DatabaseName : Database01
RuleId : VA2108
RuleAppliesToMaster : True
BaselineResult : @( 'Principal1', 'db_ddladmin', 'SQL_USER', 'None') , @( 'Principal2', 'db_ddladmin', 'SQL_USER', 'None')BaselineResult value is a composition of several sub arrays that described the T-SQL results that will be added to the baseline.
Notice the special PS syntax for defining array of arrays with one result using an opening comma.
You may find the Scan results under the storage defined by the Set-AzSqlServerVulnerabilityAssessmentSettings cmdlet, under scans/{ServerName}/{DatabaseName}/scan_{ScanId}.json
Example 2: Set a vulnerability assessment rule baseline from a baseline object
Set-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline `
-ResourceGroupName "ResourceGroup01" `
-ServerName "Server01" `
-DatabaseName "Database01" `
-RuleId "VA2108" `
-BaselineResult @( 'Principal1', 'db_ddladmin', 'SQL_USER', 'None') , @( 'Principal2', 'db_ddladmin', 'SQL_USER', 'None')
Get-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline `
-ResourceGroupName "ResourceGroup01" `
-ServerName "Server01" `
-DatabaseName "Database01" `
-RuleId "VA2108" `
| Set-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline `
-ResourceGroupName "ResourceGroup02" `
-ServerName "Server02" `
-DatabaseName "Database02"
ResourceGroupName : ResourceGroup02
ServerName : Server02
DatabaseName : Database02
RuleId : VA2108
RuleAppliesToMaster : False
BaselineResult : @( 'Principal1', 'db_ddladmin', 'SQL_USER', 'None') , @( 'Principal2', 'db_ddladmin', 'SQL_USER', 'None')Example 3: Set a vulnerability assessment rule baseline on all the databases under a server
Get-AzSqlDatabase -ResourceGroupName "ResourceGroup01" `
-ServerName "Server01" `
| Where-Object {$_.DatabaseName -ne "master"} `
| Set-AzSqlDatabaseVulnerabilityAssessmentRuleBaseline `
-RuleId "VA2108" `
-BaselineResult @( 'Principal1', 'db_ddladmin', 'SQL_USER', 'None') , @( 'Principal2', 'db_ddladmin', 'SQL_USER', 'None')
ResourceGroupName : ResourceGroup01
ServerName : Server01
DatabaseName : Database01
RuleId : VA2108
RuleAppliesToMaster : False
BaselineResult : @( 'Principal1', 'db_ddladmin', 'SQL_USER', 'None') , @( 'Principal2', 'db_ddladmin', 'SQL_USER', 'None')
ResourceGroupName : ResourceGroup01
ServerName : Server01
DatabaseName : Database02
RuleId : VA2108
RuleAppliesToMaster : False
BaselineResult : @( 'Principal1', 'db_ddladmin', 'SQL_USER', 'None') , @( 'Principal2', 'db_ddladmin', 'SQL_USER', 'None')Parameters
-BaselineResult
The results to set as baseline for the rule in all future scans
| Type: | String[][] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DatabaseName
SQL Database name.
| Type: | String |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DefaultProfile
The credentials, account, tenant, and subscription used for communication with Azure.
| Type: | IAzureContextContainer |
| Aliases: | AzContext, AzureRmContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
The Vulnerability Assessment rule baseline object to set
| Type: | VulnerabilityAssessmentRuleBaselineModel |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ResourceGroupName
The name of the resource group.
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-RuleAppliesToMaster
Specifies that the baseline should apply to the master database. This is required only when database level settings specify a storage account that is different from the one specified in the server level settings.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-RuleId
The rule ID which identifies the rule to set the baseline results to.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ServerName
SQL Database server name.
| Type: | String |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
VulnerabilityAssessmentRuleBaselineModel
String[][]
