Add-AzApplicationGatewayFrontendIPConfig
Adds a front-end IP configuration to an application gateway.
Syntax
Add-AzApplicationGatewayFrontendIPConfig
-ApplicationGateway <PSApplicationGateway>
-Name <String>
[-PrivateIPAddress <String>]
[-SubnetId <String>]
[-PublicIPAddressId <String>]
[-PrivateLinkConfigurationId <String>]
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzApplicationGatewayFrontendIPConfig
-ApplicationGateway <PSApplicationGateway>
-Name <String>
[-PrivateIPAddress <String>]
[-Subnet <PSSubnet>]
[-PublicIPAddress <PSPublicIpAddress>]
[-PrivateLinkConfiguration <PSApplicationGatewayPrivateLinkConfiguration>]
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Description
The Add-AzApplicationGatewayFrontendIPConfig cmdlet adds a front-end IP configuration to an application gateway. An application gateway supports two types of front-end IP configurations:
- Public IP addresses
- Private IP addresses using internal load-balancing (ILB) An application gateway can have at most one public IP and one private IP. Add the public IP address and private IP address as separate front-end IPs.
Examples
Example 1: Add a public IP as the front-end IP address
$PublicIp = New-AzPublicIpAddress -ResourceGroupName "ResourceGroup01" -Name "PublicIp01" -location "West US" -AllocationMethod Dynamic
$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
$AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontEndIp01" -PublicIPAddress $PublicIpThe first command creates a public IP address object and stores it in the $PublicIp variable. The second command gets the application gateway named ApplicationGateway01 that belongs to the resource group named ResourceGroup01, and stores it in the $AppGw variable. The third command adds the front-end IP configuration named FrontEndIp01, for the gateway in $AppGw, using the address stored in $PublicIp.
Example 2: Add a static private IP as the front-end IP address
$VNet = Get-AzVirtualNetwork -Name "VNet01" -ResourceGroupName "ResourceGroup01"
$Subnet = Get-AzVirtualNetworkSubnetConfig -Name "Subnet01" -VirtualNetwork $VNet
$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
$AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontendIP02" -Subnet $Subnet -PrivateIPAddress 10.0.1.1The first command gets a virtual network named VNet01 that belongs to the resource group named ResourceGroup01, and stores it in the $VNet variable. The second command gets a subnet configuration named Subnet01 using $VNet from the first command and stores it in the $Subnet variable. The third command gets the application gateway named ApplicationGateway01 that belongs to the resource group named ResourceGroup01, and stores it in the $AppGw variable. The fourth command adds a front-end IP configuration named FrontendIP02 using $Subnet from the second command and the private IP address 10.0.1.1.
Example 3: Add a dynamic private IP as the front-end IP address
$VNet = Get-AzVirtualNetwork -Name "VNet01" -ResourceGroupName "ResourceGroup01"
$Subnet = Get-AzVirtualNetworkSubnetConfig -Name "Subnet01" -VirtualNetwork $VNet
$AppGw = Get-AzApplicationGateway -Name "ApplicationGateway01" -ResourceGroupName "ResourceGroup01"
$AppGw = Add-AzApplicationGatewayFrontendIPConfig -ApplicationGateway $AppGw -Name "FrontendIP02" -Subnet $SubnetThe first command gets a virtual network named VNet01 that belongs to the resource group named ResourceGroup01, and stores it in the $VNet variable. The second command gets a subnet configuration named Subnet01 using $VNet from the first command and stores it in the $Subnet variable. The third command gets the application gateway named ApplicationGateway01 that belongs to the resource group named ResourceGroup01, and stores it in the $AppGw variable. The fourth command adds a front-end IP configuration named FrontendIP02 using $Subnet from the second command.
Parameters
-ApplicationGateway
Specifies the application gateway to which this cmdlet adds a front-end IP configuration.
| Type: | PSApplicationGateway |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DefaultProfile
The credentials, account, tenant, and subscription used for communication with azure.
| Type: | IAzureContextContainer |
| Aliases: | AzContext, AzureRmContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
Specifies the name of the front-end IP configuration to add.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PrivateIPAddress
Specifies the private IP address to add as a front-end IP for the application gateway. If specified, this IP is statically allocated from the subnet.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PrivateLinkConfiguration
PrivateLinkConfiguration
| Type: | PSApplicationGatewayPrivateLinkConfiguration |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PrivateLinkConfigurationId
PrivateLinkConfigurationId
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PublicIPAddress
Specifies the public IP address which this cmdlet adds as a front-end IP address for the application gateway.
| Type: | PSPublicIpAddress |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PublicIPAddressId
Specifies the ID of the public IP address which this cmdlet adds as a front-end IP address for the application gateway.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Subnet
Specifies the subnet which this cmdlet adds as front-end IP configuration. If you specify this parameter, it implies that the application gateway supports a private IP based-configuration. If the PrivateIPAddress parameter is specified, it should belong to this subnet. If PrivateIPAddress is not specified, one of the IP addresses from this subnet is dynamically picked up as the front-end IP address of the application gateway.
| Type: | PSSubnet |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SubnetId
Specifies the subnet ID which this cmdlet adds as the front-end IP configuration. Passing subnet implies private IP. If the PrivateIPAddress parameter is specified, it should belong to this subnet. Otherwise, one of the IP from this subnet is dynamically picked up as the front-end IP of the application gateway.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
