New-AzMobileNetworkService
Creates or updates a service. Must be created in the same location as its parent mobile network.
Syntax
New-AzMobileNetworkService
-MobileNetworkName <String>
-Name <String>
-ResourceGroupName <String>
[-SubscriptionId <String>]
-Location <String>
-PccRule <IPccRuleConfiguration[]>
-ServicePrecedence <Int32>
[-MaximumBitRateDownlink <String>]
[-MaximumBitRateUplink <String>]
[-ServiceQoPolicyAllocationAndRetentionPriorityLevel <Int32>]
[-ServiceQoPolicyFiveQi <Int32>]
[-ServiceQoPolicyPreemptionCapability <PreemptionCapability>]
[-ServiceQoPolicyPreemptionVulnerability <PreemptionVulnerability>]
[-Tag <Hashtable>]
[-DefaultProfile <PSObject>]
[-AsJob]
[-NoWait]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Creates or updates a service. Must be created in the same location as its parent mobile network.
Examples
Example 1: Creates or updates a service.
$ServiceDataFlowTemplate = New-AzMobileNetworkServiceDataFlowTemplateObject -Direction "Bidirectional" -Protocol "255" -RemoteIPList "any" -TemplateName azps-mn-flow-template
$PccRule = New-AzMobileNetworkPccRuleConfigurationObject -RuleName azps-mn-service-rule -RulePrecedence 0 -ServiceDataFlowTemplate $ServiceDataFlowTemplate -TrafficControl 'Enabled' -RuleQoPolicyPreemptionVulnerability 'Preemptable' -RuleQoPolicyPreemptionCapability 'NotPreempt' -RuleQoPolicyAllocationAndRetentionPriorityLevel 9 -RuleQoPolicyMaximumBitRateDownlink "1 Gbps" -RuleQoPolicyMaximumBitRateUplink "500 Mbps"
New-AzMobileNetworkService -MobileNetworkName azps-mn -Name azps-mn-service -ResourceGroupName azps_test_group -Location eastus -PccRule $PccRule -ServicePrecedence 0 -MaximumBitRateDownlink "1 Gbps" -MaximumBitRateUplink "500 Mbps" -ServiceQoPolicyAllocationAndRetentionPriorityLevel 9 -ServiceQoPolicyFiveQi 9 -ServiceQoPolicyPreemptionCapability 'MayPreempt' -ServiceQoPolicyPreemptionVulnerability 'Preemptable'
Location Name ResourceGroupName ProvisioningState Precedence MaximumBitRateDownlink MaximumBitRateUplink QoPolicyAllocationAndRetentionPriorityLevel QoPolicyFiveQi
-------- ---- ----------------- ----------------- ---------- ---------------------- -------------------- ------------------------------------------- --------------
eastus azps-mn-service azps_test_group Succeeded 0 1 Gbps 500 Mbps 9 9Creates or updates a service. Must be created in the same location as its parent mobile network.
Parameters
-AsJob
Run the command as a job
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DefaultProfile
The DefaultProfile parameter is not functional. Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
| Type: | PSObject |
| Aliases: | AzureRMContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Location
The geo-location where the resource lives
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaximumBitRateDownlink
Downlink bit rate.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaximumBitRateUplink
Uplink bit rate.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MobileNetworkName
The name of the mobile network.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
The name of the service. You must not use any of the following reserved strings - 'default', 'requested' or 'service'
| Type: | String |
| Aliases: | ServiceName |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NoWait
Run the command asynchronously
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PccRule
The set of data flow policy rules that make up this service. To construct, see NOTES section for PCCRULE properties and create a hash table.
| Type: | IPccRuleConfiguration[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ResourceGroupName
The name of the resource group. The name is case insensitive.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServicePrecedence
A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServiceQoPolicyAllocationAndRetentionPriorityLevel
QoS Flow allocation and retention priority (ARP) level.
Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it.
1 is the highest level of priority.
If this field is not specified then 5qi is used to derive the ARP value.
See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServiceQoPolicyFiveQi
5G QoS Flow Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition the 5QI values.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServiceQoPolicyPreemptionCapability
QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.
| Type: | PreemptionCapability |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServiceQoPolicyPreemptionVulnerability
QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.
| Type: | PreemptionVulnerability |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SubscriptionId
The ID of the target subscription.
| Type: | String |
| Position: | Named |
| Default value: | (Get-AzContext).Subscription.Id |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Tag
Resource tags.
| Type: | Hashtable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
