Part 15 - Hyper-V Server – How to setup a High Availability Cluster with just one copy of Windows Server 2008
As you know by now, I’ve spent a lot of time with Hyper-V and I continue to learn new things. I love sharing these “Ah-ha” moments with you, so here comes the next one.
I’ve been wanting to put together a Hyper-V cluster using our FREE Microsoft Hyper-V Server for some time now, and I took time over the week of Thanksgiving to do just that. My goal is to show how someone can put together a low cost Hyper-V solution. First I need to say “Thank you” to a few companies that actually loaned me some of the hardware to make this happen. Please check out my posting thanking Crucial, Dell, and Intel for their loans to my test lab.
Now, on to the fun! Here’s my scenario:
I setup a demo domain named Demo.local. This hosts my one Domain controller named DemoDC. It’s my AD and DNS server, and I also use it to remotely manage my Hyper-V Servers. I’m using static IP addresses just so I could make my life easier. You can also use DHCP, that’s what I typically use, but I opted for Static IPs so I could put this setup on my same network with everything else.
I have two servers running the Microsoft Hyper-V Server, you can download your free copy here. I will walk through the setup of these servers over the next few screen casts. The first one will start with setting up the Hyper-V server. I’m assuming that you’ve already downloaded the ISO, burned it to a DVD and installed it on your servers. I will start with the initial configuration and go from there.
I hope this information has helped, if you have any more questions, please let me know.
This session is one part of a whole series of screen casts around Hyper-V, you can go to this link to access the whole series.
So you want to get started with Hyper-V? Start here! – In Summary
Until next time,
Rob
Technorati Tags: Screen cast,Microsoft Hyper-V Server,Cluster,Microsoft Hyper-V R2
Comments
- Anonymous
February 07, 2011
Rob, This series on Hyper-V has been a great resource for me and has solved a problem or two for me. I have successfully configured a 2-node cluster running R2 and using CSV with a Dell Equallogic SAN. I am ready to add my 3rd node to the cluster. I haven't found any good articles on how to join a 3rd node to an existing cluster when using CSV. I made all of the iSCSI connections to the SAN and then added the node. This resulted in the cluster shared volumes changing to "Online (redirected access)". I waited and they never went back to just "Online" so I removed the 3rd node from the cluster and the volumes returned to "Online". Any pointers?