共用方式為

Disk Verification Test

  • 發行項

Disk Verification Test

Type: Automated Test

Overview

The Disk Verification test verifies a disk by doing random raw writes and reads and comparing the results.

Details

The test is passed the instance path of the target test device. The test then finds all hard disks that are equal to or connected to the test device. It will then choose the best target for the test in the following order:

RAW unpartitioned disk

RAW unformatted volume

Volume that can be dismounted

Volume that cannot be dismounted

The test will run a random verify scenario on this target.

The test is given a fixed run time of 72 hours. The test will display a dialog box with the current progress and bandwidth of the test. The size of the individual data transfers is determined by a command-line parameter; the default size for the logo test is 32 KB.

The test will try to do raw writes, bypassing any file system that is mounted on the hard disk if it can (as in cases 1, 2, and 3 in the preceding list).

The amount of space that the test uses is determined by the free space that is available on the test device. To ensure best device performance, you should delete unnecessary files off the test device and cleanly format or defragment the device before running the test. The test will warn you if the targets fragmentation might influence the test results.

Even though this test does measure device performance, there is currently no test case in the Logo version of this test that will pass or fail based on these measurements.

For more information about the DiskIO test application, see the "Disk Stress" topic.

Run Time: 3 days
Log File: diskio.wtl
System Restart Required: No
Test Category: Storage Adapter, Hardware Based RAID System, Hard Disk Drive
Supported operating systems for "DFW" logo testing:
Windows Vista
Windows Server 2003
Windows XP
Program:

Requirements

Software Requirements

The test tool runs on the following Windows operating systems:

  • Windows Vista
  • Windows Server 2003
  • Windows XP
  • Software components included with the device that is being tested.
  • Microsoft .NET Framework version 2.0 (installed automatically)

Hardware Requirements

  • Device to be tested
  • Computer that meets the minimum software requirements
  • Storage connected to the test device. Storage should contain media. If disk storage the disk should either be totally un-partitioned, or partitioned, formatted, and assigned a drive letter.

Processor

  • x86
  • x64
  • Itanium

Running Disk Verification Test

If you are testing any drive that requires media or testing in system-mode on a computer that contains drives that require media, you must insert media into the drives. The media that is used must be formatted and contain data that occupies at least 50% of the media's capacity.

Command Syntax

 

Command option

Description

 

File Manifest

File

Location

DiskIo.exe

…\tests\%ARCHITECTURE%\nttest\driverstest\storage\wdk

StorageDevices.dll

…\tests\%ARCHITECTURE%\nttest\driverstest\storage\wdk