共用方式為

FSX SP1: The blog posts

  • 發行項

We have collected the set of blog posts I created on release of SP1, and turned them into an article on FSInsider, here https://www.fsinsider.com/tips/Pages/SP1HowtoPrepareforSP1andWhatYouGetWhenYouInstallIt.aspx, that makes for a little easier reading.

Comments

  • Anonymous
    July 09, 2007
    The comment has been removed

  • Anonymous
    July 09, 2007
    NickN: thanks for the RAID info, I hope other readers find it useful.

  • Anonymous
    July 10, 2007
    Thanks Phil, I'll give this a whirl as the default block size that my Asus board chose was 64K on a 500GB (2 x 250GB) stripe. So currently re-installing on a separate 250GB drive and will post back if difference is noticeable.

  • Anonymous
    July 10, 2007
    The comment has been removed

  • Anonymous
    July 15, 2007
    FSX is not good for single core processors unless you have a 3 ghz speed or something like that.  I have a amd 64 athlon 2.2 ghz overclocked and a nvidia 128 mb video card.  And FSX Ran very choppy. But that was without SP1.  I also have a dell duo core processor  that I just purchased, and FSX Ran choppy on that too had to tweak a lot of the settings and I still wasn't happy with it.  But when I installed SP1 it fixed the problem it runs very smooth the graphics aren't turned all the way up but its tuned up enough to where its awesome enough for me.  Honestly with FSX you wouldn't be able to max out the graphics unless you had a 512mb graphics card or greater dell makes a 768mb graphics card and a Quad Core Processor is ideal I think then you could max everything out.  I had a physics accelerator put in my dell but I don't know if it contributes to FSX or not.  If someone knows  please let me know about the physics accelerator

  • Anonymous
    July 25, 2007
    The comment has been removed

  • Anonymous
    July 26, 2007
    Razor: we dont use the physics board.