Windows Prefers Wired Connections

Awhile ago someone asked me about how to make their laptop prefer their wired internet connection versus their wireless when both are connected to the internet. The short answer is that Windows (Vista, 7, 2008, and I’m pretty sure XP and 2003 does as well) does this by default. The key here is the network interface metric. When you have more than one default gateway defined (indicated by a network destination of 0.0.0.0), then the internet bound packets go out the interface with the lowest metric. In the case of a tie (same metric), then the internet bound packets will go out the interface listed first.

Below is the routing table of my laptop when it is docked at my home network where I am connected to the internet through my wired docking station and by my wireless access point. My wired IP address is 192.168.1.12 and my wireless IP address is 192.168.1.13. Windows is aware of this condition and automatically prefers my wired connection by giving it a lower metric of 20 versus my wireless connection metric of 25. In this case, this is my Windows 7 (Beta 1) laptop.

You can, of course, permanently alter your metrics by editing your TCP/IP settings on your network adapter’s advanced settings. By default, it is set to Automatic metric allowing Windows to decide which metrics are best. Here is a screenshot.

In conclusion, Windows will automatically prefer your wired connections versus your wireless connections when both are connected to the internet. This is great for us road warriors.

Scott Landry adds:

You should know that Vista made a change to how we handle existing sockets – after plugging in, connections will not be switched over, you must re-establish the connection in order to make use of a wired connection. For example, if you’re downloading something from a website and realize that it would go faster by plugging in, you’d have to cancel and start over after plugging in.  This is a change from XP and 2003. Here is a good reference:

The Cable Guy Strong and Weak Host Models https://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx

Comments

• Anonymous
  January 01, 2003
  The comment has been removed

• Anonymous
  January 01, 2003
  PingBack from http://microsoft.linkedz.info/2009/04/19/windows-prefers-wired-connections/

• Anonymous
  July 21, 2010
  This is not true, why do you think a question of how to force Win 7 to prefer wired over wireless connections gives a million answers on Google?

• Anonymous
  March 11, 2011
  Thank you very much for this. I wanted my wireless connection to be preferred to the wired one (wired is only to accept external connections) and it worked wonderfully.

• Anonymous
  September 29, 2011
  This is not true.windows 7 will not take the metric changed manually on tcp/ip properties.this is really big failure of windows 7 in network connections. XP was good as when we docks it automatically switch over from wireless to wired.can anyone truly suggest switch over in windows 7?

• Anonymous
  January 06, 2012
  It kinda worked for me in Win XP. Thanks

• Anonymous
  March 18, 2013
  It's Working for me in windows 2003. Thanks .........

• Anonymous
  July 29, 2013
  It might be important to add that some people might look for really disabling the wireless interface when wired is available, although with different metrics that might not be necessary. Also, let's point out that even though wired mostly has a lower metric, the taskbar still shows the wireless network connected symbol! Which is understandable, but might lead to confusion for people not understanding that both can be available but only one connection is used!

• Anonymous
  February 12, 2014
  There are no Fail proof ways for Win 7 or 8 to make sure that AT ALL times Wire is used over WIFI. The metric setting is ignored by MS. I know cause my metric for the wired is 10 and for the WiFi is 9999, but at all times the WiFi is used instead of the Wired. This is by design as Microsoft being as inept as always did not properly design their operating system. This is a DESIGN DEFECT, which Microsoft will not admit to, despite the fact that it could be caused by no other method EXCEPT incompetent design, ignored during quality assurance testing etc. The reason there are a million people looking for a fix for this design flaw is that there is NO fix available. MS will not fix it as they got your money and could care less. Being that they are among the most evil and greedy companies currently in business is why it will never be fixed. I dare them to prove me wrong and fix the obvious design defect. I double dare all who read this to log in to the MS tech net and demand that they fix this DESIGN DEFECT. I have done so and will again today.

• Anonymous
  March 11, 2014
  Ralph, show me an operating system where it does not have, in your words, a sign DESIGN DEFECT.
  
  Also show me a large company which you would regard as not being "evil and greedy".

• Anonymous
  June 08, 2014
  Ralphie, did you ever consider maybe that some things are routed in IPv6? The blog picture above doesn't even show this, and although a lot of us have ignored IPv6 for a long time, the operating system doesn't always do that. There are other reasons why the default route & metric may not be used.... like some drivers and hardware can be broken... and then there is the super-secret settings on the advanced/advanced settings of Control PanelNetwork and InternetNetwork Connections that can alter things.... firewall settings... it's a mess.

• Anonymous
  June 20, 2014
  I've got a brand new loaded Dell M6700... was getting 95 Mb/s download speeds via wired. Then I entered my router's wireless info (to prepare the laptop for use all over the house) and then it dropped the wired connection and my download speed is now 25 Mb/s via wireless - even though it's still wired.
  
  How can this NOT be described as an epic fail? The FASTEST connection should ALWAYS be preferred by default. And it is NOT.

• Anonymous
  June 20, 2014
  As follow up, the newer laptops, especially from Dell, have a "Smart Settings" icon in the notification center... it's got an "airplane mode" that disables the wireless connection... for now, that's my work around until SOMEONE at MS realizes that the fastest connection should always be the default preferred connection.
  

• Anonymous
  December 08, 2015
  The above instructions work, but may confuse you because the wifi icon is displayed in your system tray. I followed the directions, setting wired to 1 and wifi to 3.... I then toggled off the wifi , but wifi was shown in the system tray. I turned on wireshark and see that the vast majority of packets are going over the LAN instead of the WiFi... Looks like LAN is all traffic and wifi is just keepalive traffic.